Hanwha Vision SBP-300WMS Wall Mount Bracket User Manual
- May 15, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBP-300WMS Wall Mount Bracket
Package
Product Overview
- This product is used to install the PTZ Camera on a wall or vertical structure.
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Wall Mount Bracket, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
- You can install the Wall Mount Bracket directly on the wall or mount it on the Corner Mount Bracket (SBP-300KMS) or Pole Mount Bracket (SBP-300PMS) before installation.
Installation
- Pull out the external power cable, BNC cable, and communications cable (for connecting to the “camera”) through the rear of the Wall Mount Bracket into the Pipe.
- Then, it is recommended to keep the cables at a distance of about 100 mm from the pipe.
- Secure the Wall Mount Bracket to the wall, corner, or pole using the “Anchor Bolts or Nuts (M10)”.
- When installing the product on a corner of the wall, use the Corner Mount Bracket (SBP- 300KMS) and the Pole Mount Bracket (SBP-300PMS) for a pole.
- When installing the product on a wall, mark and drill 4 holes into the Wall Mount Bracket and insert the Anchor Bolts or Nuts (M10) before installation.
- Mount the Camera set on the Pipe.
- Install the camera according to the camera’s installation guide.
- Install the camera according to the camera’s installation guide.
Product Specifications
- Weight : 2Kg
- Material : Stainless
- Operation temp. : -50°C~60°C
- Operation hum. : 0~100%
Product Outline
Read User Manual Online (PDF format)
Loading......