Hanwha Vision SBP-168HM Global Vision Solution Provider Instruction Manual
- May 15, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBP-168HM Global Vision Solution Provider Instruction Manual
Package
Product Overview
This product is used to install the Anti Vandal Camera or Plastic Camera into the Wall Mount Adaptor (SBP-300WM or SBP-300WM1), Ceiling Mount Adaptor (SBP- 300CM) or Parapet Mount Adaptor (SBP-300LM).
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Hanging Mount Adaptor, Camera, and Wall/Ceiling/Parapet Mount Adaptor.
- The Hanging Mount Adaptor can be also connected to 1.5” PF screw-thread pipe as well as to the Wall/Ceiling/Parapet Mount Adaptor.
Installation
-
Insert the Hanging Mount Adaptor to 1.5″ PF screw-thread (female) pipe or to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM or 300WM1/300CM/300LM) and turn it clockwise to secure to the Pipe or Adaptor.
Make sure you fix the Pipe or Adaptor so that it reaches to the end of the 1.5” PF screw thread on the Hanging Mount Adaptor. If not secured tightly, the Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing physical damage or malfunction.
(Make sure you check the connection between two components before proceeding with the next step.) -
Install the Hanging Mount Adaptor onto the camera.
Make sure you insert the Adaptor in the right direction.
-
Connect the shield-cover parts using three screws.
A screw is connected to the shield cover as a built-in part.
Product Specifications
- Weight : SBP-168HM : 0.77kg
- Material : Aluminum
- Operation temp. : -50°C~60°C
- Operation hum. : 0~100%
Product Outline
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>