AMEGAT SDWD-S279 15 Piece Knife Set User Manual
- June 15, 2024
- AMEGAT
Table of Contents
AMEGAT SDWD-S279 15 Piece Knife Set
Product Information
Specifications
- Product Name: 15 PCS KNIFE SET SDWD-S279
- Manufacturer/Hersteller: Shenzhen Autral Technology Innovation Co., Ltd
- Address/Adresse: 6Q, Guanglong Building, No. 162 North Pingxin Road, Pinghu, Longgang, Shenzhen 518000, China
- Facebook Page: www.facebook.com/amegatofficial
- Email: support@amegat.com
- Website: www.amegat.com
- Country of Origin: MADE IN CHINA
Product Usage Instructions
Cutting Surface & Methods
Always cut on a cutting board. Our knives are designed to be used in a smooth, slicing motion because of the razor-sharp edge making it effortless, unlike a forceful up-and-down chopping motion that is needed with heavier steel knives. The proper cutting motion is locomotive motion, pushing the knife forward and down as you cut through the food, then pulling the knife up and back towards you (in order to position it for the next cut).
Cleaning And Storage
After you have washed and dried your knives, store them in a block, knife
case, in-drawer tray, sheath or wooden magnetic knife holder. We do not
recommend storing the knives unsheathed in a drawer, as this can be a
potential hazard to the blades as well as your fingers.
FAQs
Q: How should I clean the knives?
A: To clean the knives, wash them with warm soapy water and rinse
thoroughly. Dry them completely before storing.
Q: Can I use these knives for heavy-duty chopping?
A: These knives are designed for smooth slicing motion and are not
recommended for heavy-duty chopping. It is best to use them in a locomotive
cutting motion as described in the user manual.
Q: Can I store the knives unsheathed in a drawer?
A: It is not recommended to store the unsheathed knives in a drawer as
it can be a potential hazard to the blades and your fingers. Use a block,
knife case, in-drawer tray, sheath, or wooden magnetic knife holder for safe
storage.
Congratulations on receiving your knives
The paper contains knife care and maintenance Properly cleaning and maintaining will provide you long-lasting performance
15 PCS KNIFE SET
SDWD-S279
- 8″ Chef Knife
- 8″ Bread Knife
- 8″Slicing Knife
- 7″ Santoku Knife
- 5″ Utility knife
- 3.5″ Paring Knite
- 4.5″ Steak Knite ×6PCS
- Kitchen Shears
- Fork
- Wooden Stand
INSTRUCTION
Cutting Surface & Methods
Always cut on a cutting board. Our knives are designed to be used in a smooth, slicing motion because of the razor-sharp edge making it effortless, unlike a forceful up-and-down chopping motion that is needed with heavier steel knives. The proper cutting motion is “locomotive” motion, pushing the knife forward and down as you cut through the food, then pulling the knife up and back towards you (in order to position it for the next cut).
Cleaning And Storage
While you’re cooking, you’ll want your knife to be sharp and well-maintained.
We recommend you hand wash your knives with gentle dish soap and hot water
after each use. Do not use soaps with citrus extracts; they can promote rust.
Rinse with clear water. Do not use scouring pads, steel, or gritty cleanser
when cleaning the blades.
Rinse and towel dry immediately. Let the knives air dry for a few minutes
before returning them to storage.
Never leave your knife sitting in a sink full of soapy water, metal does not
respond well to being submerged in water for prolonged periods of time.
After you have washed and dried your knives, store them in a block, knife
case, in-drawer tray, sheath or wooden magnetic knife holder. We do not
recommend storing the knives unsheathed in a drawer, as this can be a
potential hazard to the blades as well as your fingers.
Manufacturer/Hersteller: Shenzhen Autral Technology Innovation Co., Ltd
Address/Adresse: 6Q, Guanglong Building, No. 162 North Pingxin Road,Pinghu,
Longgang, Shenzhen 518000, China
Facebook Page:
www.facebook.com/amegatofficial
Email: support@amegat.com
Web: www.amegat.com
MADE IN CHINA
VISHTEC UK Co.,Ltd
275 ISLINGTON SUITE 1405 NEW NORTH
ROAD LONDON ENGLAND N1 7AA
Email: Vincent.feng@vish-tec.com
Phone/Fax+ 44 1584 879 384
SCHEUFER Technologies GmbH
Hertleinstrasse 37, 91052, Erlangen,Germany
Email: ec-rep@scheufer.com
Phone / Fax: +4991319402597
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>