sudio A2 True Wireless Earphones Owner’s Manual
- June 10, 2024
- Sudio
Table of Contents
sudio A2 True Wireless Earphones
Product Information
The Sudio A2 is a set of wireless earphones that come with a charging case. The earphones can be charged using a USB-C charging cable and the charging level is indicated by a white light that shows the charging level (0-25%, 26-50%, 51-75%, 76-99%, 100%). When the battery is low (0-25%), the LED blinks amber, and between 26%-100%, it shows a white light. The earphones can be turned off by placing them in the charging case and turning them on by removing them from the case. The package includes the Sudio A2 earphones, a USB-C charging cable, an eartip holder, warnings, and an owner’s manual.
Product Usage Instructions
- To charge the earphones, connect the USB-C charging cable to the earphones and a power source.
- To check the charging level, look at the white light that shows the charging level (0-25%, 26-50%, 51-75%, 76-99%, 100%).
- If the LED blinks amber, it means that the battery is low (0-25%). If it shows white light between 26%-100%, it means that the battery level is good.
- To turn off the earphones, place them in the charging case and close the lid. To turn them on, remove them from the case.
- To use the earphones, connect them to your device by following the instructions in the owner’s manual.
- The earphones can be controlled using taps on the earbuds. A single tap on the left or right earbud will play/pause music. A double tap on the left earbud will go to the previous track, and a double tap on the right earbud will go to the next track. A triple tap on the left earbud will decrease the volume, and a triple tap on the right earbud will increase the volume.
What in the Box
- A2
- Charging cable
- Eartip holder
- Warnings
- Owners manual
Power
-
Turn ANC on/off: Hold any side 2 sec.
-
Place earphones in charging case to turn off. Remove from case to turn on.
How to Use
- Remove stickers
- Place earbuds in case
- Remove from case and connect device
Buttons Using
-
1 tap
-
Tap 2x left
-
Tap 2x right
-
Tap 3x right
-
Tap 3x left
-
Accept calls: 1 tap
-
Hang up or reject calls: Hold button 2 seconds
- Hold button 6 seconds to turn off the earphones
- Hold L&R button 8 seconds to reset
Battery Charging
- Charge with USB-C. White light shows the charging level.
Battery Indicators
- LED blinks when low battery (0-25%), and white light between 26%-100%
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.