erba 20045 Automatic Air Hose Reel Instruction Manual

: June 9, 2024
: erba

Table of Contents

SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
DESIGNATED USE
RESTRICTIONS
TECHNICAL DATA
NOISE EMISSION VALUES
IMPORTANT INFORMATION FOR INITIAL OPERATION
OPERATION INSTRUCTIONS
SERVICE AND REPLACEMENT PARTS
WARRANTY
DISPOSAL
LEGAL INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

erba 20045 Automatic Air Hose Reel

SAFETY INSTRUCTIONS

Read this material before using this product. Failure to do so can result in serious injury. KEEP THIS MANUAL. When giving this machine to third parties, always include this manual. We do not accept any liabilities for accidents or damages that result from misuse. Removal/Alteration of any safety devices or of the machine in general will result in the loss of warranty. The buyer assumes all risk and liability arising out of his or her repairs/alterations to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.

Do not exceed the maximum working pressure of 8 bar.
Use personal protective equipment suitable for working with air powered tools.
To locate any leaks apply some soapy water to the hose.
Keep children away from the working area.
Never point air powered tools at people or animals.
Seal all threads on air couplings with teflon tape.
This product has a kink proof hose. (20042, 20045)
Switch off the air supply when the product is not in use.
When working in areas with very high ambient temperatures it may cause the hose to deform.
Do not store or use the hose reel in low temperature surroundings.
Do not clean the hose with chemicals such as aceton, alcohol or acid.
This product is for indoor use only.
The end of the hose is marked with yellow tape that has ‚Stop‘ written on it.
DO NOT PULL THE HOSE ANY FURTHER THAN THAT! Pulling the hose past this line will damage the spring mechanism inside the hose reel and void any waranty!

PRODUCT DESCRIPTION

Wallmount
Stopper
Air coupling
Euro connector
Air intake hose

DESIGNATED USE

The automatic air hose reel is designed to be used as an extension to work with air powered tools. A suitable air compressor must be used. Any other use is prohbited. The buyer accepts all liabilities, legal and otherwise, for any damage or injury resulting from improper use of the product (i.e. any other use than the above stated designated use).

RESTRICTIONS

Please note, that this product is not designed for commercial or industrial use. We accept no liability or warranty claims should the product be used in industrial and/or commercial operations.

TECHNICAL DATA

Hose material:| 20038

PU

| 20042

PU

| 20045

PU

---|---|---|---
Hose length / intake length:| 8 / 1,5 m| 15 / 1,5 m| 15 / 1,5 m
Hose diameter:| 5x8mm| 6,5x1Omm| 8x12mm
Air connector:| Euro| Euro| Euro
Working pressure:| max. 8 bar| max. 8 bar| max. 8 bar
Working temperature:| 0 – 45 °C| 0 – 45 °C| 0 – 45 °C

NOISE EMISSION VALUES

See technical data.

IMPORTANT INFORMATION FOR INITIAL OPERATION

See operation instructions.

OPERATION INSTRUCTIONS

When mounting the air hose reel make sure the wall you mount it on can support the weight of the hose reel as well as the force that you will apply when pulling out the hose. If you are unsure how or unable to propplerly install the product, consult a professional. Make sure to select the mounting location in such a way, that you will reach the entire wirking area with the hose easily.

The hose reel has an automatic reel mechanism that will pull in the hose when necessary. When pulling out the hose it will lock into place automatically when you stop pulling. To retract the hose pull it again for about 20 cm to unlock. Let the hose pull back slowly (don‘t just let it snap back).
Keep the product clean.

SERVICE AND REPLACEMENT PARTS

Use original spare parts only.

WARRANTY

Legal warranty regulations apply.

DISPOSAL

Our products are packed in order to prevent damage during transport. Packing materials are valuable resurces and therefore can and should be recycled. The product itself consists of various materials (metals, oils, plastic, etc.) and should be disposed with care and in accordance with your federal and local disposal regulations.