dreame T20 Vacuum Cleaner Owner’s Manual

T20 Vacuum Cleaner

Product Information:

• Service Number: CAS-220805-005
• Customer Name: Bernd Kallinich
• Address: [Address]
• Model: Dreame Vacuum cleaner T20 (EU)
• Serial Number: P20320C1AQ02823KF
• Purchasing Date: 2021-05-25
• Delivery Date: 2022-09-06
• Maintenance Report:
  • Fault Description: Abnormal Suction, Weak suction force
  • Problem Reported/Found:
  • Exterior damage – severe scratches, Exterior distortion
  • Hardware fault – faulty motor
  • Action Taken:
  • Replaced motor & motor related components
  • Replaced main body components
  • Cleaned process

Product Usage Instructions:

Please follow the below instructions for using the Dreame Vacuum
cleaner T20:

1. 1. Before using the vacuum cleaner, make sure to replace the  

   filter.

Note: The filter is used to intercept particle dust below 0.5um
and various suspended solids. It needs to be cleaned regularly;
otherwise, it will be difficult for the vacuum cleaner to work
correctly due to clogging. Although the filter can be washed
repeatedly, it deforms each time it is washed. Generally, the
filter of the vacuum cleaner needs to be replaced at least once a
year.

1. Ensure that the vacuum cleaner is properly assembled and all
   components are securely attached.

2. Plug in the vacuum cleaner to a power source.

3. Turn on the power switch located on the vacuum cleaner.

4. Adjust the suction power according to your cleaning needs using
   the control buttons.

5. Move the vacuum cleaner over the surface you want to clean,
   making sure to cover all areas.

6. When finished, turn off the power switch and unplug the vacuum
   cleaner from the power source.

7. Empty the dust container and clean any accumulated debris.

8. Store the vacuum cleaner in a safe and dry place.

Service Number Address Model
Received Date

Maintenance Report

Basic Information

CAS-220805-005

Customer Name

Bernd Kallinich

Wilhelmsmühlenweg 45

Dreame Vacuum cleaner T20 (EU)

Purchasing Date

2021-05-25

2022-08-09

Delivery Date

2022-09-06

Fault Description

Tel E-Mail Serial Number Service Type

017680001990 [email protected]
P20320C1AQ02823KF Warranty

Issue Type: Abnormal Suction, Fault Description: Weak suction force

Detection and Maintenance
Problem Reported/Found: Exterior damage – severe scratches Exterior distortion;Exterior damage – severe scratches Exterior distortion;Hardware fault – faulty motor; Action Taken: Replaced motor & motor related components,Replaced main body components,Clean process

Please replace the filter before using it.

Comments

The filter is used to intercept particle dust below 0.5um and various suspended solids. It needs to be cleaned regularly; otherwise, it will be difficult for the vacuum cleaner to work correctly due to clogging. Although the filter can be washed repeatedly, it deforms each time it is passed. Generally, the filter of vacuum cleaner needs to be replaced at least once a year.

Tips: How to clean the filter of a vacuum cleaner? 1. Take out the filter and rinse it with clean water. It is not recommended to use a brush to avoid damage to the Hypa and reduce the filtering effect. Be careful not to puncture the filter when you remove the dirt in the gap of the filter 2. Do not put it back in the machine immediately after cleaning, but let it dry naturally in a dry place; please do not expose it to the sun. 3. After natural air drying, please install it back to the vacuum cleaner and tighten the cover.

Item(s)

Material Code 03030000001266 20020100000754

T20-Motor assembly Main body shell

Item Name

Quantity 1 1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>