AMEGAT PBW6710 Power Bank User Manual

AMEGAT PBW6710 Power Bank

Product Information

• Weight: 105g+

• Dimensions: 90x130mm

• Color: 2PANTONE 2350C+PANTONE 296C

• Model: PBW6710

• Battery Capacity: 6700mAh / 25.46wh (equivalent to
  4100mAh)

• Battery Type: Lithium Polymer

• Input: USB-C in: 5V 3A / 9V 2A (18W Max)

Product Usage Instructions

Charging Your Phone or Tablet Using Charging Cables

1. Connect the charging cable to the USB-C input port of PBW6710.
2. Connect the other end of the charging cable to your phone or tablet.
3. Press the power button on PBW6710 to start charging.

Charging Your Phone Wirelessly

1. Place your phone on top of the PBW6710 wireless charging pad.
2. Press the power button on PBW6710 to start charging.

Charging Your Smart Watch or Bluetooth Earphones

1. Connect the charging cable to the USB-C input port of PBW6710.
2. Connect the other end of the charging cable to your smartwatch or Bluetooth earphones.
3. Press the power button on PBW6710 to start charging.

Charging Devices Wirelessly and Using Cables Simultaneously

1. Connect the charging cable to the USB-C input port of PBW6710.
2. Connect the other end of the charging cable to your device.
3. Place your phone or another Qi-enabled device on top of the PBW6710 wireless charging pad.
4. Press the power button on PBW6710 to start charging both devices simultaneously.

Recharging Your PBW6710

1. Connect the USB-C charging cable to the input port of PBW6710.
2. Connect the other end of the USB-C charging cable to a USB power source.
3. The LED indicator lights will show the battery level as it charges.
4. The LED indicator lights will turn off when the battery is fully charged.

Note: Charger and cable are sold separately. Please stop using the product immediately and contact the support center in the following cases: – The product emits smoke – The product leaks liquid – The product has an abnormal smell such as a burnt smell.

Charging Your Phone or Tablet Using Charging Cables

Charging Your Phone Wirelessly

• Ready to wireless charge
• Charging
• Foreign object detected

Charging Your Smart Watch or Bluetooth Earphones

1. Enter low-current charging mode: Press and hold the power button for 3 seconds, and three white LED lights turn on and off alternatively every 6 seconds
2. Charge your smartwatch, Bluetooth earphones, or other low-power accessories
3. Exit low current charging mode: Press and hold the power button for 3 seconds.

Charging Devices Wirelessly and Using Cables Simultaneously

• This product can provide perfect magnetic alignment for iPhone 12 / 13 / 14. Dieses Produkt bietet eine perfekte magnetische Ausrichtung für das iPhone 12 / 13 / 14.
• This product can provide up to 7.5W for Qi-compatible iPhone models and up to 15W for certain Android devices.

Recharging Your PBW6710

Notes

1. The USB-C port supports USB Power Delivery fast charging for iPhone 8 and later when used with a certified Apple USB-C to Lightning cable.
2. This product can provide perfect magnetic alignment for iPhone 12 / 13 / 14.
3. This product can provide up to 7.5W for Qi-compatible iPhone models and up to 15W for certain Android devices

Product care and precautions

• Do not impact or drop the product
• Keep away from liquids and extreme heat
• Recharge the power bank at least once every 3 months
• Do not leave the product in the car for a long time.
• Do not disassemble or modify

This product complies with the radio interference requirements of the European Community.

Please stop using the product immediately and contact the support center in the following cases.

• The product emits smoke
• The product leaks liquid
• The product has an abnormal smell such as burnt smell

Declaration of Conformity

This product is intended for use within Europe. This equipment compiles with the essential requirements for the Radio Equipment Directive 2014/53/EU. AUKEY Technology Co., Ltd. hereby declares that this product PBW6710 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU, 2014/30/EU. The Declaration of Conformity for the PBW6710 is available from www.aukey.com
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body.

Specifications

• Model PBW6710
• Battery capacity 6700mAh / 25.46wh
• Rated capacity 4100mAh
• Battery type Lithium polymer
• Input USB-C in: 5V 3A / 9V 2A (18W Max)
• Output  USB-C out: 5V 2.4A / 9V 2.22A / 12V 1.5A (20W Max) Wireless: 15W (Max) / 10W / 7.5W / 5W
• Total output 20W
• Operating temperature 0~40℃
• Storage temperature  -10-45℃
• Dimensions 109 x 68 x 17mm / 4.29” x 2.68” x 0.67”
• Weight 172g / 6.07oz

SHENZHEN AUTRAL TECHNOLOGY INNOVATION CO., LTD. 6Q, GUANGDONG   BUILDING, NO. 162 NORTH PINGXIN ROAD, PINGHU, LONGGANG, SHENZHEN 518000, CHINA
FACEBOOK PAGE: WWW.FACEBOOK.COM/AMEGATOFFICIAL
EMAIL : SUPPORT@AMEGAT.COM
WEB : WWW.AMEGAT.COM
FCCID: 2BAST-PBW6710

References

• Nonstop Surprise – Amegat
• AUKEY Official | Unlock More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>