AMEGAT HDQ1010 Wireless Charging User Manual

June 13, 2024
AMEGAT

USER MANUAL
HDQ1010

Installing the Phone Mount

AMEGAT HDQ1010 Wireless Charging

  1. Snap the joint ball along with the nut into the slot.AMEGAT HDQ1010 Wireless Charging - slot.
  2. Screw the nut and select a suitable position.
  3. Rotate the locking knob and fix the mount to the air vent.

Charging Your Devices

Note

  • This wireless charger can provide magnetic alignment for iPhone 12/13/14/15 series.
  • This wireless charger is able to provide fast charging up to 15W for iPhon15 and later models, as well as select Android smartphones.
  • Charger above 20W (not included) is recommended for better performance.

Product Care and Precautions

  • Keep away from liquids and extreme heat.
  • Do not leave it in humid, extremely hot or cold place for a long time.
  • It is normal for the device to heat up slightly when charging. If it gets too hot to operate, stop charging immediately.
  • The body and internal electronic components may break down, leading tan accident such as fire or electric shock. Do not disassemble or modify.
  • When disposing of this product, follow the instructions of each local government and dispose it correctly.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Warning

  • Do not place anything other than compatible devices on top of this product.
  • Charging while there is an object (especially metal) between the product and a device may cause heat or fire. Remove the case or smartphone ring that contains metal before charging.
  • If you use a cardiac pacemaker, consult your doctor before using this product.
  • Do not bring magnetic cards (credit cards, cash cards, etc.) close to the product. Please note that we are not responsible for any damage to card data due to the influence of magnets.

Warranty & Customer Support

For questions, support, or warranty claims, please contact your seller directly.
Bei Fragen, Support oder Garantieansprüchen wenden Sie sich bitte direkt an Ihren Verkäufer.

Specifications

Model HDQ1010
Input USB-C: 5V 3A / 9V 2.22A
Output Wireless: 5W, 7.5W, 10W, 15W (Max)
Operating temperature 0~35℃ / 32~95℉
Storage temperature -20~60℃ / -4~140℉
Dimensions 111.5 x 61 x 61mm / 4.39” x 2.40” x 2.40”
Weight 77g / 2.72oz

SHENZHEN AUTRAL TECHNOLOGY INNOVATION CO., LTD.
6Q, GUANGLONG BUILDING, NO. 162 NORTH PINGXIN ROAD, PINGHU, LONGGANG, SHENZHEN 518000, CHINA
FACEBOOK PAGE: WWW.FACEBOOK.COM/AMEGATOFFICIAL
EMAIL: SUPPORT@AMEGAT.COM
WEB: WWW.AMEGAT.COM
FCC ID: 2BAST-HDQ1010

AMEGAT HDQ1010 Wireless Charging - icon

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals