GREEN Notus-95 Air Cooler User Manual
- June 15, 2024
- GREEN
Table of Contents
GREEN Notus-95 Air Cooler User Manual
User’s Manual
Specifications
NOTUS 95 PWM
Components
Intel Socket 1150/1151/1155/1156 /1700/1200 CPUs
AMD Socket FM2+ / FM2 / FM1 / AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 CPU
&APUs
To ensure safe and easy installation, please read the following precautions
Product design and specifications may be revised to improve quality and performance.
Installation
- Cooler Orientation
Intel Socket
-
Install the Clip Support to the motherboard according to the socket-type. (See diagram)
-
Align the Clip Support to the motherboard and fasten with the Pushpins.
-
Clear off any particles or residue from the CPU’s surface.
Then spread a thorough layer of Thermal Grease on the CPU and the base of the cooler. -
Completely unfasten the 2 bolts already assembled on the clip and adjust the position to fit the Intel socket.
-
Install the cooler on the Clip support as shown in the picture and connect the lug slot of the clip on to the lug on the clip support. Then fasten the bolts on each side a few turns at a time.
-
Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan Header.
Caution
Please make sure that PWM Control Mode is activated in the motherboard’s BIOS settings.
AMD Socket
-
AMD Socket
Clear off any particles or residue from the CPU’s surface. Then spread a thorough layer of Thermal Grease on the CPU and the base of the cooler. -
Completely unfasten the 2 bolts already assembled on the clip and adjust the position to fit the AMD socket.
-
Install the cooler on the Clip support as shown in the picture and connect the lug slot of the clip on to the lug on the clip support. Then fasten the bolts on each side a few turns at a time.
-
Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan Header.
Caution
Please make sure that PWM Control Mode is activated in the motherboard’s BIOS settings.