panacom SP-3041 Rechargeable Speaker User Manual

: June 6, 2024
: panacom

Table of Contents

FEATURES
SPECIFICATIONS
WIRELESS BT CONNECTION
TF/MICRO SD CARD MODE:
USB MODE:
FM MODE:
AUX MODE:
CHARGING:
MODE CYCLE:
TWS (TRUE WIRELESS STEREO)
TWS DISCONNECTION
INTERNATIONAL WARRANTY
REPAIR SERVICE
Documents / Resources

Living & Loving Technology

USER MANUAL

panacom -logo2

panacom SP-3041 Rechargeable Speaker-

SP-3041 RECHARGEABLE SPEAKER Users Guide

Thank you for purchasing SP-3041 Panacom’s Rechargeable Speaker. Please read the manual carefully before operating.

FEATURES

Wireless BT connection TWS-True VVireiess Stereo FM radio USIWTF Led light Rechargeable battery Micro USB charging cable Aux in 5W RMS

SPECIFICATIONS

Speaker size: 6.5″ Labium battery: 1200mAh

WIRELESS BT CONNECTION

A) BT Version: 5.0, with lower power consumption and over 10m meters operating range.
B) ON/OFF, after the power is turned on, the display “BLUE” flashes and the speaker emits a BT mode tone. C) Open the phone BT, search for the device name, click the device name to confirm, and then connect. After the connection is successful, BT is always on, and the speaker sends a pairing success tone.

TF/MICRO SD CARD MODE:

When the speaker is not plugged into the TF card device, it will boot into the BT mode. Inserting the TF card speaker will automatically detect the TF card playback mode. If the speaker has a TF card device, it will enter the TF card mode directly after booting.

USB MODE:

A) When the speaker is not plugged into the USB disk, it will boot into the BT mode. Inserting the U disk, speaker will automatically detect the USB playback mode, displaying ‘PLAY’ and playback time. If the speaker has a USB disk, it will enter the TF card mode directly after booting.
B) The display shows the playback time during playback, and the “PAUSE” characters are displayed when paused.

FM MODE:

A) Press the button ‘MODE’, enter into FM mode. FM Frequency is 87.5Hz — 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t an external antenna. C) Press and hold the button `PLAY/PAUSE’ to automatically search the station, press the “PLAY/ PAUSE’ button to pause.

AUX MODE:

A) Plug one end of the 3.5MM audio cable into the speaker AUX jack, the speaker will automatically detect the AUX mode, and the other 3.5MM plug is connected to the phone or computer.
B) The “LINE” character is displayed in AUX mode. Press the “PLAY/PAUSE” button to pause.

CHARGING:

A) Plug the micro USB cable into the speaker to connect to the 5V charger or computer to charge for inside U-battery.
B) The item has a red light on the charging indicator. When charging, the indicator light is on. When it is full, the indicator light is off.

MODE CYCLE:

Press the MODE” button to switch USB, TF, FM, AUX. (Note: USB, TF, AUX are only displayed when USB, TF, AUX input device is plugged in.)

TWS (TRUE WIRELESS STEREO)

Press the “MODE” key to find the BT function from any two speakers.
Then double click the “TWS” button
When having BB sound, the TWS function is connected.

TWS DISCONNECTION

Press the “TWS” button or the “MODE” button, the TWS function will be disconnected.

INTERNATIONAL WARRANTY

Terms and Conditions

Panacom warrants the operation of this product to be free from any manufacturing and/or material defect for a period of 6 months from the date of purchase by the user.
This warranty is limited to the repair and/or replacement of this product, according to our own criterion, free of charge within the stipulated term and it does not extend to consequential or incidental damages to other products that may be used with this unit.
The warranty shall be voided in the following cases: a) repair or attempt to repair by third parties not authorized by the company. b) In case of performing any type of cut in connection cables, plugs, connectors, or other adapters different from the original ones provided by the company.
To make this warranty effective, you shall contact the Authorized Service Center of your country and they shall carry out the pertinent procedure. In order to start the necessary procedure to get the said warranty, you shall hand in the Original Purchase Invoice where the purchase date, dealer name, and product identification shall be stated clearly.
Transportation, freight, stay, and/or Insurance expenses. if any, are not covered by this warranty.