OMADA Cutter 9141 4 inches Hard Metal Cutting Machine User Manual
- June 10, 2024
- omada
Table of Contents
OMADA Cutter 9141 4 inches Hard Metal Cutting Machine User Manual
Read the manual carefully before using it….
GENERAL POWER TOOL SAFETY
WARNINGS
Warning! Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool
WORK AREA SAFETY
-
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
-
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes. -
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapted plugs with earthed(grounded) power tools. Modified plugs and un-matching outlets will increase the risk of electric shock.
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep it away from heat, oil, sharp edges or moving parts.
- When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
PERSONAL SAFETY
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs or alcohol. A moment of inattention while operating power tools may result in serious personal injury.
- Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
- Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Dress properly, say no to loose clothing or jewellery. Keep your hair, clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
INTENDED USE AND FEATURES
Cut-off machine is a circular saw kind of a power tool which is designed to
cut hard materials, such as metals, tile, and concrete, where the cutting
action is performed by an abrasive disc.
- This can make a clean cut so that the end product needs a lesser amount of finishing. It is a powerful and compact tool for cutting that works quite precisely and fast.
- The 2400W robust motor delivers 3,900 rpm for most demanding metal cutting applications.
- It also features fence adjustment up to 45º right or left (angle cutting), and a tool-less vice adjustment for increased productivity.
PRODUCT SPECIFICATIONS
Motor: 230V~50Hz 1900W
110V~60Hz 15A
Speed: 3800r/min
Blade Size: 355mm
Pcs/Ctn: 1 pc
Net weight: 12.6Kgs
Gross weight:13.5Kgs
Loading qty:460pcs/20″” 1130pcs/40″”
PRODUCT OVERVIEW
Warning! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the pictures provided as a visual guide to easily assemble the product!
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>