HF2211A Serial Server Device User Manual

HF2211A Serial Server Device

Product Information

Specifications

• MIPS MCU with 4MB Flash and 8MB SRAM
• Run on eCos
• Support TCP/IP/Telnet/Modbus TCP Protocol
• Support RS232/RS422/RS485 to Ethernet/Wi-Fi Conversion
• Serial Speed Upto 230400 bps
• Support STA/AP/AP+STA Mode
• Support Router or Bridge Network Working Mode
• Support Easy Configuration Through a Web Interface or PC IOTService Tool
• Support Security Protocol Such As TLS/AES/DES3
• Support Web OTA Wireless Upgrade
• Wide DC Input 5~36VDC
• Size: 95 x 65 x 25 mm (L x W x H)

Product Usage Instructions

General Description

The HF2211A provides RS232/RS485/RS422 interface to Ethernet/Wi-Fi connectivity to web enable any device. It integrates a TCP/IP controller, memory, 10/100M Ethernet transceiver, high-speed serial port, and a fully developed TCP/IP network stack and eCos OS. The HF2211A also includes an embedded web server used to remotely configure, monitor, or troubleshoot the attached device.

Device Parameters

The HF2211A is the substitute type of HF2211 with the same software function. It integrates all serial to Ethernet functionality with a compact size of 95 x 65 x 25 mm.

FAQ

Q: What is the substitute type of HF2211?

A: The substitute type of HF2211 is HF2211A, which has the same software function.

Overview of Characteristic

• MIPS MCU with 4MB Flash and 8MB SRAM. Run on eCos
• Support TCP/IP/Telnet /Modbus TCP Protocol
• Support RS232/RS422/RS485 to Ethernet/Wi-Fi Conversion, Serial Speed Upto 230400 bps
• Support STA/AP/AP+STA Mode
• Support Router or Bridge Network Working Mode.
• Support Easy Configuration Through a Web Interface or PC IOTService Tool
• Support Security Protocol Such As TLS/AES/DES3
• Support Web OTA Wirelss Upgrade
• Wide DC Input 5~36VDC
• Size: 95 x 65 x 25 mm (L x W x H)

HISTORY

• Ed. V1.0 08- 16-2021 First Version
• Ed. V1.1 05- 10-2022 Revision Version

PRODUCT OVERVIEW

General Description
The HF2211A provides RS232/RS485/RS422 interface to Ethernet/Wi-Fi connectivity to web enable any device. The HF2211A integrate TCP/IP controller, memory, 10/ 100M Ethernet transceiver, highspeed serial port and integrates a fully developed TCP/ IP network stack and ECos OS. The HF221 1A also includes an embedded web server used to remotely configure, monitor, or troubleshoot the attached device.
The HF2211 A using highly integrated hardware and software platform. It has been optimized for all kinds of applications in the industrial control, smart grid, personal medical application and remote control that have lower data rates, and transmit or receive data on an infrequent basis. The HF2211A integrates all serial to Ethernet functionality with 95 x 65 x 25mm size. HF2211A is the substitute type of HF2211, software function is the same with HF2211

Device Paremeters

Table 1. HF2211A Technical Specifications

System Information
Processor/ Frequency| MIPS/320MHz
Flash/ SDRAM| 4MB/8 MB
Operating System| eCos
Ethernet Port
Port Number| 1 RJ45

1 WAN/ LAN switchable

Interface Standard| 10/ 100 Base-T Auto-Negotiation
Protection| 8 KV Isolation
Transformer| Integrated

Network Protocol

| IP, TCP, UDP, DHCP, DNS, HTTP Server/Client, ARP,

BOOTP, AutoIP, ICMP, Web socket, Telnet, uPNP, NTP, Modbus TCP

Security Protocol

| TLS v 1.2

AES 128Bit DES3

Wi- Fi Interface
Standard| 802. 1 1 b/g/n
Frequency| 2.412GHz-2.484GHz
Network Mode| STA/ AP/ STA+AP
Security| WEP/ WPAPSK/ WPA2 PSK
Encryption| WEP64/ WEP128/ TKIP/ AES
Tx Power| 802. 1 1b: +20dBm (Max.)
 | 802 . 11g: + 18dBm (Max.)

802 1 1n: + 15dBm (Max )

---|---

Rx Sensitive

| 802. 1 1b: -89dBm

802. 11g: -81dBm

802 1 1n: -71dBm

Antenna| 3 dBi Stick Antenna
Serial Port
Port Number| 1 RS232/RS485/RS422

Interface Standard

| RS2 32 : DB9

RS4 8 5 / RS4 2 2 : 5 . 0 8 mm connector

Support one channel of RS2 3 2 / RS4 2 2 / RS4 8 5 .

Data Bits| 8
Stop Bit| 1,2
Check Bit| None, Even, Odd
Baud Rate| TTL: 2400 bps~230400 bps

Flow Control

| No Flow Control

Hardware RTS / CTS, DSR / DTR ( RS23 2 ) flow control is not supported

Software Xon/    Xoff flow control

Software
Web Pages| Http Web Configuration

Customization of HTTP Web Pages

Configuration

| Web CLI

XML import Telnet

IOTService    PC  Software

Firmware Upgrade| Web
Basic Parameter
Size| 95 x 65 x 25 mm
Operating Temp.| -25 ~ 85°C
Storage Temp.| -45 ~ 105°C, 5 ~ 95% RH (no condensation)
Input Voltage| 5~36VDC
Working Current| ~200mA
Power| <700mW

Key Application

The HF2211 A device connects serial device to Ethernet networks using the TCP/ IP protocol:

• Remote equipment monitoring
• Asset tracking and telemetry
• Security Application
• Industrial sensors and controls
• Medical devices
• ATM machines
• Data collection devices
• Universal Power Supply (UPS) management units
• Telecommunications equipment
• Data display devices
• Handheld instruments
• Modems
• Time/ attendance clocks and terminals

HARDWARE INTRODUCTION

The HF2211 A unit is a complete solution for serial port device connecting to network. This powerful device supports a 10/ 100BASE-T Ethernet connection, a reliable and proven operating system stored in flash memory, an embedded web server, a full TCP/ IP protocol stack, and standards-based (AES) encryption.

Interface Definition

Table 2. HF2211A Interface Definition

RJ45 Ethernet

| 10/ 100M Ethernet

Default is WAN function in AP mode ( Can be configured to LAN Function), connect to router LAN port for network access.

In STA mode, it works in LAN function.

SMA| Antenna SMA Interface
RS232| RS2 3 2 Communication
RS485/ RS422| RS4 8 5 / RS4 2 2 Communicaton
Earth| Protect Earth
DC Input| DC Power 5 ~ 36 V
LED

Indicator

|

Power

| Internal Power Supply Indicator On： Power is OK

Off： Power is NG

Link

| Network Connection Indicator

On: Include the following condition.

Ethernt 2 connection OK Wi-Fi STA connect to AP

Wi-Fi AP being connected by other STA device

Off:  No network connection

Active

| Data transfer Indicator On： Data is transfering.

Off： No data transfer

Button|

Reload

| Restore to factory setting

Long press this button for 4 seconds and loose it to restore parameters to factory setting.

Switch|

Protect

| Device parameter protect

On: Enable protect, working parameter can not be modified.

Off: Disable protect

RS232 Interface
Device serial port is male(needle), RS232 voltage level(can connect to PC directly), Pin Order is cosistent with PC COM port. Use cross Cable connected with PC(2-3 cross, 7-8 cross, 5-5 direct, 7-8 no connection), see the following table for pin defination.

Table 3. RS232 Interface

RS485 Interface

RS485 use two wire links, A(DATA+), B(DATA-). Connect A(+) to A(+), B(-) to B(-) for communication. The RS485 interface support maximum 32 485 device, special hardware version can support max 255 device. The cable maximum length is 1200 meters. Need to add 120Ohm terminal resistor for over 300 meters.

RS422 Interface
RS4 22 interface use T+/T-/R+/R-, cross-connect to device as the following picture.

RJ45 Interface
Ethernet port is 10M/ 100M adaptive, support AUTO MDI/MDIX which means it support direct connecting to PC with Ethernet cable.

Table 4. RJ45 Interface

Mechanical Size
The dimensions of HF2211A are defined as following picture (mm):

Rail Mounting
We support to provide rail for mounting as the following picture.

Order Information
HF2211A is defined as following:

NETWORK STRUCTURE

Wireless Network
HF2211A can be set as a wireless STA and AP as well. And logically, it supports two wireless interfaces, one is used as STA and the other is AP. Other STA devices can join into the wireless network through AP interface. So the it can provide flexible networking method and network topology. Functions is as follow:

AP Network
HF2 211A can construct a wireless network as AP. All the STA devices will consider the AP as the centre of the wireless network. The mutual communication can be transponded by AP, shown as follow:

STA Wireless Network
Take the following picture as example. When router works in AP mode, HF2211 A connects to the user’ s devices by RS232/ RS485 interface. In this topology, the whole wireless network can be easily stretched.

AP+STA Wireless Network
HF2 211 A can support AP+STA method. It can support AP and STA interface at the same time.Shown as follow:

• In this picture, HF2211 A open the AP+STA function and the STA interface can be connected to the remote server by the router. Similarly, the AP interface can also be used. Phone/ PAD can be connected to the AP interface and to control the serial devices or set itself.
• Through AP+STA function, it is convenient to use Phone/ PAD to monitor the user’s devices and not change its original settings.
• Through AP+ STA function, it is convenient to configure the product. And it solves the problem that the formal product can only configure by serial port.

Notes that:
When the AP+ STA function is opened, the STA interface needs to connect to other router.
Otherwise, STA interface will endlessly scan the router information nearby. When it is scanning, it will bring bad effects to the AP interface, like losing data etc.

AP and STA parts must set to the different sub- network for the product working as APSTA mode.

IOTService Software
Open the IOTService after connect to the AP hotspot generated by HF2211 A or connect to Product Ethernet port to PC, then configure the parameter.

Webpage Configuration
Use PC to connect with HF2211 A through its AP hotspot or Ethernet connection. Input the default IP(10.10.100.254, default username and password: admin/admin) to login the webpage to configure the parameter.

Ethernet Interface Function
HF2 211A provides with a 100M Ethernet interface. Through the 100M Ethernet interface, user can achieve the connection among WIFI, serial port and Ethernet port.

Ethernet Port with Wi-Fi

HF2 211 A servers as APSTA and generate a central network. The IP addresses of all the devices and module’ s are in the same network segment.

Note：
If product works in AP mode, then the Ethernet is working as WAN mode, PC will use Auto-IP to set its IP when connect via Ethernet. Better to change via Wi- Fi, then the PC and other devices are all in same subnetwork.(10.10.100.xxx)

Ethernet Interface Function(Router)

The HF2211 A device Ethernet interface work in router mode. When connect to router, it will get IP address from router(as picture 192. 168. 1. 100). The product itself generate a subnet(10. 10. 100.254 default). The device from the Ethernet interface is assigned with IP address by module ( 10.10.100.101 ).Then the device and the PC1 are in the same subnet for network communication. A connection fro PC1 to PC2, but PC2 cannot actively connect to PC1.

Ethernet Port Function(Bridge)

The HF2211 A device Ethernet interface work in router mode. When connect to router, it will get IP address from router(as picture 192. 168. 1. 101). AT the whole network, the product is like an invisible device. PC1 ad PC2 can communicated mutually without any constraint. But if product needs to connect with other devices, it needs set LAN IP address(192. 168. 1. 10 as picture)

Notes:
Webpage, IOTService, or Cli command to set working mode, by default is router mode. It need reboot when change its working mode

FUNCTION DESCRIPTION

Refer to “IOT Device Series Software Funtion” document for more detailed function.

FCC Regulations

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.
• Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

http://www.iotworkshop.com

APPENDIX A: REFERENCES

A.1 Test Tools
IOTService Configure Software:
http://www.hi-flying.com/download-center-1/applications-1/download-item- iotservice UART 、Network Test software:
http://www.hi- flying.com/index.php?route=download/category&path=1_4

APPENDIX B: CONTACT INFORMATION

• Web: www.iotworkshop.com or www.hi-flying.com
  Contact:

• Sales: sales@iotworkshop.com

• Support: support@iotworkshop.com

• Service: service@iotworkshop.com

• Business: business@iotworkshop.com

References

• HI-FLYING.COM
• HI-FLYING.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>