BIGBIG WON Rainbow2 Pro Wireless Gaming Controller User Manual
- June 15, 2024
- BIGBIG WON
Table of Contents
BIGBIG WON Rainbow2 Pro Wireless Gaming Controller
Wireless Gaming Controller
Model:Rainbow2 Pro
NAME OF EACH PART
BIGBIG WON ELITE APP
This controller supports APP real-time customize and quick setting on the controller without APP. You can finely adjust the RGB, motion control, joystick, trigger, buttons, and MACRO of the controller with our ELITE APP. Compared with quick settings, it has richer functions and clearer visual operations. At the same time, it can store multiple sets of controller configurations and generate a configuration list, which is convenient for instant applications.
Notice: After using the APP customize and then using the quick setting, the configuration will be changed, which cannot correspond to the configuration of the APP. Therefore, after opening the APP next time, the APP will read the controller configuration and generate a current “unnamed” configuration.
TURN ON/OFF-
Press HOME button for 3 seconds to turn on/off the controller.
CONNECTION
There are three connection methods for this handle, 2.4G connection/Bluetooth connection/wired connection. The connection methods are described as follows:
2.4G connection:
The 2.4G receiver and the handle have paired before leaving the factory. After
the handle is turned on, insert the 2.4G receiver into the host to complete
the connection; if the connection fails, you need to pair again, and the
operating method is as follows:
- After the receiver is inserted into the host, press and hold the button on the receiver until the receiver indicator light flashes quickly, which indicates the receiver enters the pairing state.
- After the handle is turned on, press and hold the pair key on the top for 3 seconds, and the HOME light will flash quickly, which indicates the receiver enters the pairing state.
- Wait for a moment. When the receiver and the handle HOME lights are on, it indicates pairing is successful.
Bluetooth connection:
After the controller is switched on, press the top pairing button for 3
seconds; the HOME indicator flashes quickly, meaning it is in pairing status;
the HOME indicator will become solid after the connection is successful. (in
Switch mode, the bright channel indicator depends on the sequence of the
controller on the console)
Wired connection:
After the controller is switched on, use a type-C cable to connect the
controller and the cosnole.
Note: Please note that the controller is compatible with Switch and
Xinput modes.
After the connection with the console, you need to switch to the mode
corresponding to the machine. Xinput is the default mode.
Steam:
To connect with Steam, you need to tick “Xbox Configuration Support” in the
“Settings-Controller-GENERAL CONTROLLER SETTINGS” of Steam otherwise the
controller may not be recognized in games.
Switch:
After connecting Switch via wired connection, you need to enable the “System
Settings – Controller and Sensors – Pro Controller Wired Communication”.
MODE SWITCH
The controller is compatible with Switch and Xinput. You need to switch to the
corresponding mode for proper uses. The settings are as follows:
Press A + HOME for 3 seconds until the HOME turns red, meaning it has switched
to the Switch mode;
Press B + HOME for 3 seconds until the HOME turns green, meaning it has
switched to the Xinput mode.
Notice: If you need to connect iOS and Android mobile with Bluetooth please turn the controller to Xinput mode.
DESCRIPTION OF LIGHT STRIP
There is a stroke optical fiber hidden under the transparent black shell of this handle,and the color of the left and right lights of this optical fiber can be set through APP. The gradual change, breathing and flashing light effects can be set.
- Double-click the FN key to switch among “Mode light effect”, “Customize light effect” and “Off”.
- The default is “Mode light effect”. In this mode, the light strip has the same color as the HOME light: When switching to the Switch mode, the Home light and the light strip are red; When switching to the Xinput mode, the HOME light and the light strip are green.
- The light strip also supports customizing the light effect in the APP. When. modifying the light effect in the APP, it will automatically switch to the “Customize light effect” mode.
REMAP
The controller is equipped with four remappable additional buttons and compatible with key mapping settings. The settings are as follows:
- Set key mapping: Press the + (M1/M2/M3/M4); the FN indicator shows a breathing status, meaning it is in key mapping status;
- Then press the target button mapped to M1/M2/M3/M4; the FN indicator flickers twice, meaning the key mapping is successful.
- Clear single key mapping: Hold the button for clearing key mapping (M1/M2/M3/M4) and double click the ; the FN indicator flashes twice, meaning the key mapping of the selected button is cleared successfully.
- Clear all key mapping: Double click the , the FN indicator flashes twice, meaning the key mapping of all the buttons is cleared successfully.
- APP: The quick setting only supports mapping the keys of the controller to the additional back buttons (M1/M2/M3/M4). After downloading the APP, you can modify the key values of all the buttons of the controller through the APP.
TURBO
The controller supports turbo settings. The supported button include A/B/X/Y,1/ 4/-/→, LB/RB/LT/RT, M1/M2/M3/M4.
The settings are as follows:
- Set TURBO: Hold the + the “target key”: the FN indicator flickers twice, meaning the function is enabled successfully. (When TURBO is operated, the FN indicator flickers with current turbo frequency)
- Clear single TURBO: Hold the “target button” and double click the ¾; the FN indicator flickers twice, meaning the function of this buttons is disabled successfully.
- Clear all TURBO: Double click the ¾, the FN indicator flickers twice, meaning the function of all the buttons is disabled successfully.
- TURBO frequency: You can switch to any of the three frequencies, 5s, 10s, and 20s, by pressing FN + *-. The default is 5s.
- APP: After downloading the APP, you can set the TURBO of all the buttons of the controller through the APP.
MACRO RECORDING
The controller support MACRO recording. Each set of MACRO must be bound with a back key (M1/M2/M3/M4) as a trigger switch. The keys that use the function include A/B/X/Y. 1/4/<-/-, LB/RB/LT/RT, joystick L/joystick R, and joystick.
The settings are as follows:
- Record MACRO: Hold the + (M1/M2/M3/M4) for 3 seconds; the FN indicator is in a breathing status, meaning it is in MACRO recording. Press any key for MACRO recording, and click the key after the recording is finished; the FN indicator flickers twice, meaning the recording is finished. (When MACRO is operated, the FN indicator is flashing slowly status until the MACRO operation is finished) Clear single MACRO: Press the “target key” (M1/M2/M3/M4)” and double click the : the FN indicator flickers twice, meaning the MACRO of the selected key is cleared successfully.
- Clear all MACRO: Double click the , the FN indicator flickers twice, meaning the function of all the buttons is disabled successfully.
- APP : The shortcut setting only supports the approximate macro recording function, The quick setting only supports the approximate MACRO recording.
After downloading the APP, you can edit the MACRO through the APP, as fine as the duration of each step and the interval time; at the same time, the APP can store multiple sets of MACROs and generate a MACRO library, and instantly select the your configuration.
SIMULATED MOTION CONTROL
This controller supports simulated motion control. It can use the built-in gyroscope to simulate the operation of the joystick. There are 3 modes of motion control: Global left joystick motion control, Global right joystick motion control, and
Response right joystick motion control. Here are the open methods:
- Hold the FN + Press left stick(LS) to open the Global left joystick motion control.
- Hold the FN + Press right stick(RS) to open the Global right joystick motion control.
- Hold the FN + Trigger button + Press right stick(RS) to open the Response right joystick motion control.
- APP: The quick setting only supports on/off the motion control. If you need better performance in different games please use APP customize. The simulated motion control must be used with the APP.
- SWITCH supports native motion control please do not open the motion control to get a better experience.
ONBOARD CONFIGURATION
-
Switch mode: Click the and the channel indicator will change from red to white, which means entering the configuration switch mode. The four indicators in this mode show four different onboard configurations;
Click the again to start the configuration switching, and the indicator lights will switch in order from top to bottom. The first indicator is the first configuration and so on.
If there is no action within the 5s configuration switch mode, it will automatically exit the mode, the indicator will change from white to red, and the indicator will back to the channel indicator. -
Xinput mode: There is no channel indication function in this mode, so the indicator light is white by default, indicating the current onboard configuration. In this mode, clicking the will switch the configuration directly.
-
Reset the configuration: Press the Configuration switch button for 3 seconds to clear all settings of the current configuration.
ROCKER DEAD ZONE
A certain joystick dead zone has been set in the factory default configuration
of this handle. If users have other requirements, they can set the central
dead zone of the left and right joystick in the APP separately:
Note: Joystick 0 deadzone will have higher control accuracy, but also will lead to drift in the game.
JOYSTICKS & TRIGGERS CALIBRATION
When the joysticks drift seriously, or they cannot be pushed to the maximum:
when the triggers automatically send a key value, or they cannot reach the
maximum linear value, please try calibrating the joysticks & triggers as
follows:
- Press and hold the view key and menu key at the same time for 3 seconds, and the stroke light strip will turn orange and breathe slowly.
- Push the joystick to the maximum, rotate it at a constant speed. Repeat 3-5 times.
- Press the LT/RT button to the maximum and release. Repeat 3-5 times.
- At last, press the view key and menu key at the same time, and the stroke light strip will double flash in orange, which indicates the calibration is completed.
GYROSCOPE CALIBRATION
Place the handle on a horizontal table, press the menu key and screenshot key
of the handle at the same time, and the light strip will turn purple and
breathe slowly until the light strip double flashes in purple, which indicates
the calibration is completed.
AUDIO
Jbis controller supports audio input/output.After coppecting the host io
wired. mode or 2.4G mode, insert an earphone with microphone into the 3.5mm
audio port at the bottom of the handie;
Press FN+ 1/ to adjust the volume of PC platform;
VIBRATION ADJUSTMENT
The controller is equipped with four levels of vibration adjustment. The
settings are as follows:
Press the FN + to circularly switch to any of the four vibration levels of the
trigger motor, namely Strong, Medium, Weak, and Off.
BATTERY INSTRUCTIONS
When the battery is too low, the light strip on both sides of the controller
will flash red light 2 times per second for 10 times, every five minutes to
remind.
After connecting to the power supply, the light strip will red breathing
indicated in the charging state. The light strip will returns to its original
state when the charging is finished.
Charging stand:
stand without any light indication in the standby status. When the controller
is connected to the stand the stand’s lights will turn on, it means the
controller is charging. If the light is always on in green, it means the
controller battery is full.
DETAILED FUNCTIONAL OPERATION INSTRUCTIONS
Please access “BIGBIG WON Official Website> Support” to check the instruction
https://www.bigbigwon.com/support/
YOUR RIGHTS
12-month limited warranty from the date of purchase.
WELCOME TO THE BIGBIGWON COMMUNITY
The BIGBIG WON community is built to connect those who seek the winning edge.
Join us Discord and Follow our social channels for the latest offerings,
exclusive event coverage,and opportunities to score BIGBIG WON hardware.
Scan the QR code to watch video tutorial
Visit the official support page for a detailed video tutorial / FAQ / User
manual / APP Downlod
www.bigbigwon.com/support
FCC Caution
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
$ 15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
$ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Accordingto § 15.247(e)(i) and § 1.1307(b)(1), systems operating under the
provisions of this section shall be operated in a manner that ensures that the
public is not exposed to radio frequency energy level in excess of the
Commission’ s guidelines.
According to KDB 447498 (2) (a) (i)