BIGBIG WON C1-lite Rainbow Lite Wired Gaming Controllers User Manual

June 13, 2024
BIGBIG WON

BIGBIG WON C1-lite Rainbow Lite Wired Gaming Controllers

BIGBIG-WON-C1-lite-Rainbow-Lite-Wired-Gaming-Controllers-product.
\(2\)

Product Information

  • Name of Each Part: Indicator, View button LT, Menu button, LB, LS Left joystick LED1, LED2, D-pad, HOME button, Right RS joystick, USB port, RT RB, A/B/X/Y LED4 LED3 Triangle button, M2, M1 Remappable button, FN button, 3.5mm headphone jack, Type-C data cable
  • Package Contents: BIGBIG WON RAINBOW LITE1 / User Manual1 Qualified Certification1 / 1.8m Ultra-light soft braided data cable1
  • Supported Platform: Win10/11 / Switch
  • Connection: This controller supports two modes: Xinput and Switch. After connecting, you need to switch to the corresponding mode to use it normally.
  • Mode Switch: Hold the B+HOME button for 3 seconds until the indicator turns green to switch to Xinput mode. Hold the A+HOME button for 3 seconds until the indicator turns red to switch to Switch mode.
  • Light Effect: This controller has a variety of built-in lighting effects. Double-click the FN button to switch or turn off the light.
  • Remap: This controller comes with two remappable back buttons. Press FN + (M1/M2) to enter the remapping mode. Press the front button that needs to be mapped, and the indicator will flash twice in green to indicate successful key mapping.
  • Clear Key Value: To cancel key mapping, press and hold the button that needs to be canceled (M1/M2), and double-click FN. The indicator will flash twice in green to indicate successful cancellation.
  • Turbo: Not specified in the given text.
  • Macro Recording: Not specified in the given text.
  • Deadzone of Joystick: The default deadzone of the joystick is 0. To change the deadzone, hold FN + the left or right joysticks down (LS/RS) to switch between 0/10 for the deadzone of the left or right joysticks respectively.
  • Hair Trigger: Not specified in the given text.
  • Screenshot: This controller supports one-click screenshots. In Xinput and Switch modes, clicking the triangle button will be used as the screenshot button. The screenshot file of the PC platform is saved in “This computer – Picture – Screenshot”.
  • Audio: Not specified in the given text.
  • Vibration Adjustment: Not specified in the given text.

Product Usage Instructions

  1. To connect the controller, follow the steps below:
    • Plug in the Type-C data cable into the USB port of the controller.
    • Connect the other end of the data cable to your device (Win10/11 PC or Switch).
  2. To switch between Xinput and Switch modes:
    • Hold the B+HOME button for 3 seconds until the indicator turns green to switch to Xinput mode.
    • Hold the A+HOME button for 3 seconds until the indicator turns red to switch to Switch mode.
  3. To control the light effect:
    • Double-click the FN button to switch or turn off the light.
  4. To remap buttons:
    • Press FN + (M1/M2) to enter the remapping mode.
    • Press the front button that needs to be mapped, and the indicator will flash twice in green to indicate successful key mapping.
  5. To clear key value (cancel key mapping):
    • Press and hold the button that needs to be canceled (M1/M2).
    • Double-click FN, and the indicator will flash twice in green to indicate successful cancellation.
  6. To change the deadzone of joysticks:
    • Hold FN + the left or right joysticks down (LS/RS) to switch between 0/10 for the deadzone of the left or right joysticks respectively.
  7. To take a screenshot:
    • In Xinput and Switch modes, click the triangle button to capture a screenshot. The screenshot file will be saved in “This computer – Picture – Screenshot”.

Please refer to the official support page or user manual for more detailed functional operation instructions, including turbo, macro recording, audio, vibration adjustment, and additional support:

Join the BIGBIG WON community on Discord and follow their social channels for the latest offerings, exclusive event coverage, and opportunities to score BIGBIG WON hardware.

NAME OF EACH PART

BIGBIG-WON-C1-lite-Rainbow-Lite-Wired-Gaming-
Controllers-FIG- \(1\) BIGBIG-
WON-C1-lite-Rainbow-Lite-Wired-Gaming-Controllers-FIG-
\(2\)

PACKAGE CONTENTS

  • BIGBIG WON RAINBOW LITE*1
  • User Manual*1
  • Qualified Certification*1
  • 1.8m Ultra-light soft braided data cable*1

SUPPORTED PLATFORM

  • win10/11 / Switch

CONNECTION

This controller is a wired controller, so you only need to use a Type-c data cable to connect the controller to the console.

  • Note : This controller supports Xinput and Switch modes. After connecting with the console, you need to switch to the correct mode. The default setting is Xinput.
  • Steam : To connect to Steam, you need to check the “Xbox Configuration Support” in the “Settings – Controller -GENERAL CONTROLLER SETTINGS” of Steam. Otherwise, it may cause unrecognized issues within the game.
  • Switch : After connecting the Switch, you need to turn on “System Settings – Controllers and Sensors – Pro Controller Wired Communication”.

MODE SWITCH

This controller supports two modes: Xinput and Switch. After connecting, you need to switch to the corresponding mode to use it normally.

The setting method is as follows:

  • Hold the B+HOME button for 3 seconds until the indicator turns green, which means switching to Xinput mode;
  • Hold the A+HOME button for 3 seconds until the indicator turns red, which means switching to Switch mode

LIGHT EFFECT
This controller has a variety of built-in lighting effects. Double-click the FN button to switch or turn off the light.

REMAP
This controller comes has two remappable back buttons and supports changing key values. The setting methods are as follows:

Remap:

  • Press FN + (M1/M2), and the indicator will breathe in green, indicating that it has entered the remapping mode;
  • Then press the front button that needs to be mapped, and the indicator will flashes twice in green, indicating that the key mapping is successful.

Clear key value:
Press and hold the “button need to cancel the key mapping(M1/M2)”, and double- click FN, and the indicator will flashes twice in green, indicating that the cancellation is successful.

TURBO
This controller supports Turbo, and the supported buttons include A/B/X/Y/LT/RT/LB/RB eight buttons.
The setting methods are as follows:

Set TURBO:
Hold FN + the “key need to be set”, the indicator will flash in orange, which means it is successfully turned on.
When the TURBO is opened, the 2nd and 3rd LED lights will flash according to the TURBO frequency.

Cancel TURBO:
Hold the “button need to cancel TURBO” and double-click the FN button, the indicator will flash twice in orange, which means the cancellation is successful.

TURBO frequency:
Hold FN + ← to cycle between 5/s, 10/s, and 20/s three frequencies, the default is 5/s.

MACRO RECORDING

This controller supports the MACRO recording function, each set of MACRO must be bound with a remappable back button (M1/M2) as the trigger. The buttons support recording: A/B/X/Y, ↑/↓/←/→, LT/RT/LB/RB, RS/LS, and eight directions of the joystick.

The setting methods are as follows:

MACRO recording:
Hold FN + (M1/M2) for 3 seconds, the indicator will breathe in red, indicating that it has entered the MACRO recording mode. Press the buttons of the controller to record the MACRO. After finishing the recording, clicks FN once to end the MACRO recording. The indicator will flash twice in red. During the execution of the MACRO, the four LEDs will flash from left to right until the MACRO ends.

Clear MACRO:
Hold the “button need to cancel the macro (M1/M2)” and double-click, the indicator will flash twice in red, indicating that the cancellation is successful.

DEADZONE OF JOYSTICK

This controller is made for pro-competitive, so the deadzone of the joystick is 0 in the factory default configuration. This will allow players to get greater control accuracy, but will also result in slight drift in games without dead zones. To take care of more players, we have set 0/10 dead zones for different players. The changing methods are as follows:
Hold FN + the left or right joysticks down (LS/RS) to switch between 0/10 for the deadzone of the left or right joysticks respectively.

HAIR TRIGGER

  • This controller supports the hair trigger setting, this function can help the operation of the linear trigger be faster. The trigger set with a quick trigger will lose its “linear”. Press the trigger to “on”, and lift the trigger for any distance to “off”. You can press the trigger again without lifting it to the original position, which can greatly optimize the speed of operation. The setting methods are as follows:

On/Off Hair Trigger:

  • Hold the Triangle button + Trigger (LT/RT), the indicator will flash twice in cyan indicating that the Hair Trigger is successfully turned on.
  • Hold the Triangle button + Trigger (LT/RT) the indicator will flash twice in cyan again indicating thate Hair Trigger is successfully turned off.

SCREENSHOT
This CONTROLLER supports one-click screenshots. In Xinput and Switch modes, clicking the triangle button will be used as the screenshot button. (The screenshot file of the PC platform is saved in “This computer – Picture – Screenshot”)

AUDIO
This controller supports audio input/output. After connecting the console, you can plug the headset with a microphone into the 3.5mm audio port at the bottom of the controller. And you can set the volume by press FN+↑/↓. (Only on PC)

VIBRATION ADJUSTMENT
This controller supports four-speed vibration adjustment, and the setting methods are as follows:
Press FN + →, and the vibration of the trigger motor can be cyclically switched between strong, medium, weak, and off.

DETAILED FUNCTIONAL OPERATION INSTRUCTIONS
Please access ”BIGBIG WON Official Website>Support” to check the instruction https://www.bigbigwon.com/support/

Scan the QR code to watch video tutorial

  • Visit the official support page for a detailed video tutorial: www.bigbigwon.com/support
  • If you have any questions or issues, please submit a support request through the ways below: AMAZON Product page> Seller profile> “Ask a question” Customer Service Address: support@bigbigwon.com

WELCOME TO THE BIGBIGWON COMMUNITY
The BIGBIG WON community is built to connect those who seek the winning edge. Join us Discord and Follow our social channels for the latest offerings, exclusive event coverage, and opportunities to score BIGBIG WON hardware.
© 2022 BIGBIG WON Inc. All rights reserved. Product may vary slightly from pictures.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals