Genius HS-M905BT Bluetooth Earbuds

Specifications

Product Overview

The HS-M905BT Bluetooth Earbuds come with a charging case and feature touch control operations. The earbuds are equipped with a microphone and an LED indicator. The charging case has a USB-C charging port.

Touch Control Operations:

Play/Pause Music – Single Tap    Previous/Next Song – Swipe Left/Right    Volume Adjustment – Swipe Up/Down    Answer/End Call – Double Tap    Voice Assistant Activation – Triple Tap

For detailed instructions on touch control operations, refer to the sections within the manual.

Multi-Language Quick Guide

• The manual includes a multi-language quick guide, providing basic instructions and illustrations for quick reference.

Smart Touch Control

• The earbuds feature a Smart Touch Control system, allowing users to manage playback, calls, and voice assistant with simple gestures.

FAQ

• How do I pair the HS-M905BT earbuds with my device?
• Enable Bluetooth on your device, and select HS-M905BT from the list of available devices to pair.
• What should I do if the earbuds are not charging?
• Ensure that the charging case is charged and the earbuds are correctly placed in the case. Check for any debris on the charging contacts.
• Can I use one earbud at a time?
• Yes, you can use either earbud independently for calls or music.
• What is the operating range of the earbuds?
• The earbuds have an operating range of up to 10 meters in free space.
• How do I activate the voice assistant?
• Triple tap on the earbud to activate the voice assistant feature.

Note: The above content is a transcription of the provided images. For more detailed information, refer to the full manual provided with the HS- M905BT Bluetooth Earbuds.

Smart Touch Control

Product Overview

Operation Description

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference Huang or more of the following macros.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
•  Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

The symbol for Separate Collections in European Countries

• This symbol indicates that this product is to be collected separately.
• The following applies only to users in European countries:
• This product is designated for separate collection at an appropriate collection point.
• Do not dispose of it as household waste.
• For more information, contact the retailer or the local authorities in charge of waste management.

CE Declaration of Conformity

• The following designated products:
• M/N: HS-M9XXXBT Series is herewith confirmed to comply with the requirements set out in the Council Directive on the
• Approximation of the Laws of the Member States relating to Radio Equipment Directive (2014/53/EU). For the evaluation regarding the electromagnetic compatibility, the following standards were applied:
• EN 300 328 / EN 301 489-1 / EN 301 489-17 / EN 62479 / EN 62368-1
• This declaration is prepared for the manufacturer:
• KYE SYSTEMS CORP.

• 492. Sec. 5. Chongxin Rd.. Sanchona Dist. New Taipei Citv 241017. Taiwan (R.O.C.)

CONTACT

KYE Systems Corp.

• 492, Sec. 5, Chongxin Rd., Sanchong Dist.,

• New Taipei City 241017, Taiwan
• Tel: 886-2-2995-6645
• Fax: 886-2-2995-6649
• Email: support@geniusnet.com.tw (Tech. Support)
• http://www.geniusnet.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>