GREEN TINYCOOL 90 Processor Fan User Manual
- June 15, 2024
- GREEN
Table of Contents
GREEN TINYCOOL 90 Processor Fan
User’s Manual
Specification
- Dimensions : 112(L)x108(YV)x53(H)mm
- Weight :211g
- Fan size :90x90x25(H)mm
- Bearing type : Hydraulic
- Rated voltage : DC12V
- Rated current : 0.21 A (MAX)
- Airflow : 43.4CFM
- Noise : 22.0 dBA (Max)
- Speed : 2000 RPM± 10%
Before installation, please confirm that the CPU cooler is suitable to cool down the heat of your individual CPU model.
Basic information
- Please make sure that the thermal paste is evenly distributed on the top of your CPU in case it has not already been applied to the cooler heat sink bottom directly.
Intel LGA1700 socket mainboard installation instructions
- Please push plastic pin A to the 1700 mark direction as shown on picture 1-1.
- Confirm that the direction of the 4 plastic pins is right, then press the whole set of plastic clips into the installation hole on the mainboard, then insert the plastic rivets to fix them as shown on picture 1-2.
- Connect the fan cable connector to the power socket on the mainboard where marked as „CPU FAN”. Start your computer and check if everything works properly and if the CPU is properly cooled, then finish installation
AMD Socket AM5/AM4/AM3+/AM3/AM2+/AM2/FM1/FM2/FM2+ socket mainboard installation instructions
-
Put the CPU cooler to the center of the plastic clip. Hitch the tail of the cooler clip to the plastic clip. Then move the other side of the cooler clip and hitch it to the other side of the plastic clip.
-
Connect the fan cable connector to the power socket on the mainboard where marked as „CPU FAN”. Start your computer and check if everything works properly and if the CPU is properly cooled, then finish installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>