DT Research 316T-MD Medical Tablet User Guide
- June 9, 2024
- DT Research
Table of Contents
DT Research 316T-MD Medical Tablet
INTRODUCTION
Thank you for acquiring the 316T/MD, part of DT Research’s line of medical
tablets.
Featuring a slim, robust enclosure, the 316T/MD with a 15.6” TFT display is
powered by the Intel® processor, offering optimal combinations of performance
and power savings.
The 316T/MD is available with Microsoft® Windows® or Ubuntu operating system.
Each software operating system features web browser, client/ server computing
software, media player, accessories, and applications support.
PACKAGE CONTENTS
- One 316T/MD with Battery Pack and Hands trap
- AC-DC Power Adapter with Power Cord
- Basic Operation Guide
Input/ Output Ports
**A** USB 3.0 Port
**B** Headphone-out
**C** Ethernet Port
**D** DC-in
Button Functions
BUTTON
| ACTION
---|---
**1**
| Programmable Button
**2**
| Power Button
**3**
| Battery Latch
Power/Battery LED Status:
- Blue indicates the battery is 25% to 100% charged
- Blinking blue indicates the battery is charging
- Orange indicates that the battery is between 11% to 25%
- Blinking Orange indicates that the battery is below 10%
PRECAUTIONS
-
Always exercise care when operating and handling the 316T/MD.
-
Do NOT apply excessive pressure to the display screen.
-
We recommend using the Digital Pen (optional) to keep the screen clean.
-
Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the 316T/MD should face away from direct light to reduce glare. -
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any AC-DC adapter other than the one provided or acquired from the manufacturer or its partners.
-
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the 316T/MD and disconnect all power sources. Report the problem to your device provider immediately.
-
Never attempt to disassemble the 316T/MD, as this will void the warranty
BASIC FEATURES
The 316T/MD wireless tablet integrates a bright and multi-touch display, one USB port, and embedded networking elements such as wireless LAN and Bluetooth. The 316T/MD is complemented by a suite of accessories, including battery expansion, charging cradles, and battery charger kit, for a comprehensive user experience.
A 316T/MD typically integrates an 802.11ax wireless LAN (WLAN) adapter that
may connect to other wireless devices or access points. If your 316T/MD does
not come
with such a network adapter, please consult your device provider to establish
the desired network connectivity
OPERATION
Powering ON and OFF
To activate the 316T/MD, push and quickly release the Power Button. The display will come on in a few seconds. To put the 316T/MD in Standby mode, push and quickly release the Power Button. To turn the 316T/MD off for extended storage, power off safely using any software function that “shuts down computer” provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use the
AC-DC adapter with the 316T/MD when setting up for the first time to fully
charge the internal battery pack. You may charge the external battery pack
with it attached to the 316T/MD, or with the optional external battery charger
kit.
NOTE:
When the battery pack is charging, the blue-colored Battery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack may have been drained
substantially.
Try unplugging/ relogging the AC-DC adapter to the 316T/MD a few times to
activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The 316T/MD may be configured using the utilities and methods dictated by
the software operating system. The 316T/MD should be configurable for various
properties such as user profiles, network features, and several system
elements.
Wireless Networking
Wireless LAN
The 316T/MD is often delivered with an embedded (user-inaccessible) 802.11ax
WLAN adapter equipped with a hidden custom antenna.
- Through the support of typical WLAN adapters, the 316T/MD should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection.
- The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 316T/MD and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
- When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc.
- Refer to the access point operating manuals for setting up the 802.11 access points.
Bluetooth
The 316T/MD offers the Bluetooth module which supports Bluetooth 5.1 standard
including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy, which
delivers faster speeds with low power consumption.
USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the 316T/MD supports a wide range of USB-based
peripherals.
These peripherals are applicable for software installation, applications
storage, data storage, and system software recovery and updates.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research website.
To Hold the Tablet
Left hand: grip the left back side of the tablet with your left hand four index fingers, with thumb resting on the top of the back side of the tablet and palm securely against the back.
Right hand: grip the right back side of the tablet with your right hand four index fingers, with thumb resting on the top of the back side of the tablet and palm securely against the back.
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
This Class [B] digital apparatus complies with Canadian ICES-003.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>