AEMC SD661 AC Current Oscilloscope Probe User Manual
- June 13, 2024
- AEMC
Table of Contents
AC Current Oscilloscope Probe
Model: SD661
USER MANUAL
Receiving Your Shipment
Upon receiving your shipment, check that the contents agree with the packing slip. Notify your distributor at once of any shortages. If the equipment appears to be damaged, file a claim immediately with your carrier, and notify your distributor at once, giving a detailed description of the damages. Save the damaged packing container to substantiate your claims.
Packaging
AC Current Oscilloscope Probe Model SD661 (Cat. #1201.49) is shipped with an instruction manual.
Warning
- Connect the probe to the oscilloscope or voltage measuring instrument before clamping the probe around a conductor.
- Never use the probe on circuits rated higher than 650 V or with float voltage greater than 250 V.
- Never leave the probe clamped around a conductor while not connected to an oscilloscope or voltage measuring instrument.
- Carefully center the conductor inside the probe jaws and ascertain that the probe is perpendicular to the conductor.
- Avoid, if possible, the proximity of other conductors which may create noise.
- Check the magnetic mating surfaces of the probe jaws; these should be free of dirt, rust, or other foreign matter.
- Do not use a probe which is cracked, damaged or has defective leads.
Description
AC Current Oscilloscope Probe Model SD661 expands oscilloscope applications in industrial or power environments, and is ideal for analysis and measurement of distorted current waveforms and harmonics. The Model SD661 permits accurate display and measurement of currents from 10 mA to 1000 A rms, 1 Hz to 100 kHz without breaking into the circuit. A passive filter eliminates noise, ring on rapid rising (di/dt) waveforms, and ensures accurate screen displays. The probe connects directly to an oscilloscope through an insulated coaxial cable with an insulated BNC.
Compatibility
The AC Current Oscilloscope Probe Model SD661 is compatible with any analog or digital oscilloscope or other voltage-measuring instrument which has the following features:
- BNC input connector.
- Range capable of displaying 0.2 to 0.5 V per division.
- Minimum input impedance of 1 MQ.
Control and Connector Identification
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Current Range: 10 mA to 1200 A rms continuous (2000 A peak)
Output Signal: mV output signal (2 V peak max)
3 range switch selectable on handle
100 mV/A: 10 mA to 20 A peak !
10 mV/A: 0.5 A to 200 A peak
1 mV/A: 5 A to 2000 A peak
*Accuracy:
100 mV/A: 3% reading + 10 mV
10 mV/A: 2% reading
1 mV/A; 2% reading
Phase Shift’:**
100 mV/A
0.5 A: 20° °
2 A: 15°
10 A: 10°
12 A: 10°| 10 mV/A
5 A: 3°
20 A: 2°
100 A: 1.5°
120 A: 1.5°| 1 mV/A
50 A: 1.5
200 A: 0.5°
1000 A: 0.5°
1200 A: 0.5°
---|---|---
Frequency Range (with current derating): 1 Hz to 100 kHz (@ -3dB) See
typical response curves on page 6.
Load Impedance: >1 M Ω/47 pF
di/dt max.: 10 A/ys
Ampere. Second product: 0.1
Rise or fall time: <40 jis
Internal Impedance: <100 Ω/2.2 nF
Insertion Impedance (50/60 Hz):
100 mMV/A: 0.1 Ω
10 mV/A: 0.02 Ω
1 mV/A: 0.01 Ω
Working Voltage: 650 V max. (conductor to ground)
Common Mode Voltage : 250 V max. (output to ground)
Influence of Adjacent Conductor: <0.2 mA/A AC
Influence of Conductor Position in Jaw Opening:
±0.02 reading from 10 Hz to 5 kHz
±1% reading from 5 kHz to 100 kHz
MECHANICAL SPECIFICATIONS
Maximum Cable Diameter: 2.13″ (54 mm) |
Influence of Temperature: <0.1% per °K
Operating Temperature/RH: -13° to 122°F (-25° to 50°C), 0 to 85% RH
Storage Temperature/RH: -40° to 176°F (-40° to 80°C), 0 to 90% RH
Dimensions: 4.1 x 8.1 x 1.6″ (105 x 206 x 48 mm)
Weight: 1.43 lbs (650 g)
Color: Dark gray handles with red jaws
Material: Fiberglass charged polycarbonate
Output: 5 ft (1.5 m) insulated lead with insulated BNC connector
US Patents: design patent pending
SAFETY SPECIFICATIONS
Electrical:
- IEC 414 Class I
- Dielectric Test: 2 kV, 50/60 Hz
- Leakage Current: < 0.5 mA @ 600 V, 50/60 Hz
- Working Voltage: 650 V max. (conductor to ground)
- Float Voltage: 250 V max. (output to ground)
Envelope Protection: JP 20 (IEC 529)
Drop Test: 1 m (IEC 68-2-32)
Mechanical Shock: 100 G (IEC 68-2-27)
Vibration: 10/55/10 Hz, 15 mm CEC 68-2-6)
Polycarbonate Material (10% Fiberglass charged polycarbonate):
Handles: UL 94 VO
Jaws: UL 94 V2
*Accuracies are given for an ambient temperature of 23°C +3°K, relative humidity of 20 to 75%, conductor centered in jaw window, no DC compo- nent, no external current carrying conductor, 45 Hz to 1 kHz, magnetic field < 40 A/m and 1 MΩ/47 pF load.
TYPICAL RESPONSE CURVES
Operation
Current Measurement
Connect the Current Probe Model SD661 to the proper input channel on the
oscilloscope. Begin with the least sensitive range on the current probe (1
mV/A). Select the 0.5 V/Division range on your oscilloscope. Clamp the probe
on the conductor to be measured and read the current flowing directly on your
oscilloscope.
You may also use your oscilloscope to amplify the signal while using the 1
mV/A probe range (which offers the best accuracy and least phase shift).
Note: It is possible to change the range on the current probe without
removing the probe from the current carrying conductor, but it is impor- tant
to remember not to exceed the permissible peak ratings of 2000 mV peak or 4000
mV peak to peak maximum. The peak ratings by range are: 20 A peak @ 100 mV/A,
200 A peak @ 10 mV/A and 2000 A peak @ 1 mvV/A.
Maintenance
Be sure that mating surfaces of the jaw are free of dirt or foreign matter.
If they are rusted, gently clean with a soft, lightly oiled cloth.
Repairs
For further maintenance, N.LS.T. calibration, and/or repair, contact our
factory service center:
Instrumentation Corporation
15 Faraday Drive
Dover, NH 03820
603/749-7366
603/742-2346 fax
Technical Assistance
If you are experiencing any technical problems, or require assistance with the proper application of this instrument, please call our toll-free hotline: 800/343-1391
M1201.49
Documents / Resources
| AEMC
SD661 AC Current Oscilloscope
Probe
[pdf] User Manual
SD661 AC Current Oscilloscope Probe, SD661, AC Current Oscilloscope Probe,
Current Oscilloscope Probe, Oscilloscope Probe
---|---