V-TAC VT-ST300 LED Solar Street Light Instruction Manual

June 15, 2024
V TAC

V-TAC VT-ST300 LED Solar Street Light

Product Information

Specifications

  • Model: VT-ST100, VT-ST150, VT-ST200, VT-ST300
  • Solar Panel Watts: 35W, 40W, 50W, 80W
  • Lumens: 2160LM, 2750LM, 4000LM, 6000LM
  • Beam Angle: 120°
  • Long Life: 20,000 hrs
  • IP Rating: IP65
  • Battery Type: Li-on 6.4V/11AH battery, Li-on 6.4V/22AH battery, Li-on 6.4V/27.5AH battery, Li-on 6.4V/40AH battery
  • Charging Time: 4-6 hrs sunlight charging
  • Working Time: 12-15 hrs
  • Maximum Installation Height: 8 meters
  • Number of LEDs: 160 pcs, 300 pcs, 406 pcs, 575 pcs

Product Usage Instructions

Installation Instruction

  1. Please make sure to turn off the power before starting the installation.
  2. The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
  3. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person to avoid a hazard.
  4. Replace any cracked protective shield.
  5. Install only by a certified electrician.

Application

Ideal choice for Gated Communities, Streets, Industrial Facilities, Cross Roads, and many more.

Parts Included

  • Solar panel
  • Expansion screw
  • Solar light U-frame
  • Remote control with 1m wire
  • Internal six angle screw
  • Arm fixation
  • U type screw
  • U frame fixed on the arm
  • Screw fixation
  • Plug the twist after the twist cap

Note

The battery must be fully charged before using for 3-5 rainy days.

Solar charging (The battery is in the lamp housing).

FAQ

Q: How long does it take to charge the battery?

A: The battery takes 4-6 hours of sunlight charging to fully charge.

Q: How long does the working time of the light last?

A: The working time of the light is 12-15 hours.

Q: What is the maximum installation height?

A: The maximum installation height is 8 meters.

Q: Can the light source be replaced?

A: No, the light source of this luminaire is not replaceable. When it reaches its end of life, the whole luminaire should be replaced.

Q: What should I do if the external cable or cord is damaged?

A: If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced by the manufacturer or a qualified person to avoid hazards.

Q: Can I install the product myself?

A: It is recommended to install the product only by a certified electrician.

Q: What is the application of this product?

A: This product is an ideal choice for Gated Communities, Streets, Industrial Facilities, Cross Roads, and many more.

Q: How many LEDs are there in each model?

A: The number of LEDs varies depending on the model: 160 pcs, 300 pcs, 406 pcs, 575 pcs.

Q: Where can I reach out for support or queries?

A: For any queries or issues with the product, please reach out to us at support@v-tac.eu.

Q: Where can I find more product range or make inquiries?

A: For more product range or inquiries, please contact our distributor or nearest dealers. V-TAC Europe Ltd., Bulgaria, Plovdiv 4000, Bul.L.Karavelow 9B.

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.

WARNING!

  1. Please make sure to turn off the power before starting the installation.

  2. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

  3. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person to avoid a hazard.

  4. Replace any cracked protective shield.

  5. Install only by a certified electrician.

This marking indicates that this product should not be disposed of with other household wastes.
Application: Ideal choice for Gated Communities, Streets, Industrial Facilities, Cross Roads, and many more.

TECHNICAL DATA

Model| Solar panel watts| Lumens| Beam angle| Long life| IP

rating

| Maximum mounting heigh| Operation temperature| Battery type| Charging time| Working time| Maximum installation height| Number of LEDs
---|---|---|---|---|---|---|---|---|---|---|---|---
VT-ST100| 35W| 2160LM| 120| 20 000 hrs| IP65| 6-7 m| -20 to +45°C| Li-on 6.4V/11AH

battery

| 4-6 hrs sunlight charging| 12-15 hrs| 8 meters| 160 pcs
VT-ST150| 40W| 2750LM| 120| 20 000 hrs| IP65| 6-7 m| -20 to +45°C| Li-on 6.4V/22AH

battery

| 4-6 hrs sunlight

charging

| 12-15 hrs| 8 meters| 300 pcs
VT-ST200| 50W| 4000LM| 120| 20 000 hrs| IP65| 6-7 m| -20 to +45°C| Li-on 6.4V/27.5AH

battery

| 4-6 hrs sunlight charging| 12-15 hrs| 8 meters| 406 pcs
VT-ST300| 80W| 6000LM| 120| 20 000 hrs| IP65| 6-7 m| -20 to +45°C| Li-on 6.4V/40AH

battery

| 4-6 hrs sunlight

charging

| 12-15 hrs| 8 meters| 575 pcs

PARTS INCLUDED

INSTALLATION GUIDE

  1. Before installing, please remove all the parts to check if all are in good condition or not.
  2. The luminaire is connected to the solar panel against the sunlight. Please make sure the solar panel is adjusted at the correct angle to receive sunlight.
  3. The remote control is designed with an operation distance of 8-15m
  4. The lamp comes with two inflated studs as shown in the parts included section.
  5. The solar panel angle must be adjusted in the correct direction to receive sunlight.
  6. Lamps cannot be installed in low-lying areas, so as not to soak.
  7. Plug the male and female plugs tighten the waterproof cap and install it.
  8.  After installation test the light using the remote control.

MAINTENANCE & WARNING

  • Do not use solvents, petrol, etc. Otherwise, the light will be damaged.
  • Clean the light with a dry, lint-free cloth.
  • Check the solar panel for dirt regularly. If dirt is present remove it to guarantee flawless function of the product.
  • Especially during the winter, keep the product free from snow and ice.
  • Confirm installation direction is correct (solar panel should be at the top)
  • Confirm no objects are blocking the solar panel from receiving sunlight
  • Keep away from the fire.
  • Don’t immerse in the water

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCT RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals