SCT VC-A71P 4K 60fps IP PTZ Camera User Guide

SCT VC-A71P 4K 60fps IP PTZ Camera

Specifications

• RemoteCam5+TM Design Guide
• Sony IP10 or Generic IP VISCA Controller
• RC5+ CETM
• WPS-48 48VDC
• 100-240V 47-63Hz Power Supply
• RC5+ HETM

Product Usage Instructions

Installation:

1. Choose a suitable location for mounting the Lumens VC-A71P.
2. Ensure that the mounting surface is secure and can support the weight of the camera.
3. Use the provided screws and brackets to securely attach the camera to the mounting surface.
4. Connect the camera to a power source using the provided power supply.
5. If using a Sony IP10 or Generic IP VISCA Controller, connect it to the camera using an Ethernet cable.
6. Adjust the camera angle and focus as desired.

Camera Control:
The Lumens VC-A71P can be controlled using either the included remote control or a Sony IP10 or Generic IP VISCA Controller.

• Using the Remote Control:
  1. Ensure that the camera is powered on.
  2. Point the remote control towards the camera.
  3. Use the arrow keys to pan and tilt the camera.
  4. Utilize the zoom buttons to adjust the camera zoom level.
  5. Explore other buttons on the remote control to access additional camera features and settings.
• Using a Sony IP10 or Generic IP VISCA Controller:
  1. Ensure that the camera and controller are connected via Ethernet.
  2. Refer to the controller’s user manual for specific instructions on controlling the Lumens VC-A71P.

Frequently Asked Questions (FAQ):

How can I update the firmware of the Lumens VC-A71P?
To update the firmware of the Lumens VC-A71P, please follow these steps:

1. Visit the official Lumens website and navigate to the support section.
2. Download the latest firmware version for the VC-A71P.
3. Connect a USB flash drive to your computer and copy the firmware file onto it.
4. Power off the camera and insert the USB flash drive into the camera’s USB port.
5. Power on the camera and wait for the firmware update process to complete.
6. Once the update is finished, remove the USB flash drive and power cycle the camera.

Can I use the Lumens VC-A71P with video conferencing software?
Yes, the Lumens VC-A71P is compatible with various video conferencing software. Simply connect the camera to your computer using a USB cable or utilize the camera’s network capabilities for integration with video conferencing applications.

Remote Cam5+ Design Guide

FEATURES

• 4K60 Video Support
• Ethernet up to Gigabit Speeds Supporting Streaming Video and Camera Control
• PoE++ 51W Power Delivery
• +12VDC DC Power Output Jack Supplies 48W

Powering On

To power on the Lumens VC-A71P, follow these steps:

1. Ensure that the camera is connected to a power source.
2. Press the power button located on the camera or the remote control.
3. The camera will initialize and be ready for use.

Troubleshooting

If you encounter any issues with the Lumens VC-A71P, please refer to the troubleshooting section in the user manual for assistance. Some common troubleshooting steps include:

• Check all cable connections to ensure they are secure.
• Verify that the power source is supplying adequate power to the camera.
• Reset the camera by disconnecting it from power for a few seconds and then reconnecting it.
• Contact Lumens customer support for further assistance if necessary.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>