VIVOTEK AW-GET-083A-120 Outdoor PoE Switch Installation Guide
- June 15, 2024
- Vivotek
Table of Contents
**VIVOTEK AW-GET-083A-120 Outdoor PoE Switch Installation Guide
**
INTRODUCTION
The AW-GET-083A-120 is a 4 port 10/100/1000BaseT PoE switch capable of feeding 15.4/30W (54V max. per port) power to Power over Ethernet (PoE) devices. It comes with another 2x GbE Ethernet and 2x GbE SFP port. The switch is capable of a total of 120 Watts PoE power budget.
PACKAGE CONTENTS
-
1x PoE switch * 1x Quick Installation Guide - 1x T30 L-wrench, 4x wall anchors|
IMPORTANT
- Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
- Make sure the ventilation openings on the switch are not blocked.
- Use CAT5 or 5e UTP/STP cables.
- AC input (100~240V/AC, 50~60Hz), for a max. consumption of 150W.
CONNECTION
AC Power Cable Spec.
DC Power Cable
DC Power Cable Spec
Wire Size | 10~18AWG |
---|---|
Wire Strip Length | 8mm |
DC Power Cable Spec.
Wire Size | 10~18AWG |
---|---|
Wire Strip Length | 8mm |
LED DEFINITIONS
** Power PW1/PW2| Green ON| Power is on and normal.
---|---|---
SFP port Green| Green ON| Fiber is aeeached.
Grren Flashing| Data is being transmitted / received.
LAN ports Green| Green ON| TX link is detected.
Grren Flashing| Data is being transmitted or received.
PoE ports Amber**| Amber ON| PSE is activated and PD is detected.
Amber OFF| PoE OFF
RESET
Reset the switch | 3 seconds | Blinking Green | All LEDs off |
---|
INSTALLATION
Use the included M10 hex socket screws to secure the power box to a pole-mount or corner mount bracket.
The mounting hole definition is illustrated below. The same mounting hole pattern apply to all pole-mount and corner- mount brackets
- Outdoor PoE switch:
- AW-GEU-083A-240
- AW-GET-083A-120
- AW-GET-123A-240
- AW-GEU-086A-240
- AW-GET-086A-120
- AW-GET-126A-240
IMPORTANT
If the need should arise for connecting two outdoor switches, use the uplink ports #5 ~ #8. If you use PoE ports for cross-switch connections, the 12KV surge protection will not apply
The cabinet must be grounded using a ground wire between the ground screw and earth ground.
All specifications are subject to change without noice Copyright© 2017 VIVOTEK INC. All rights reserved.
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
| T: +886-2-82455282| F: +886-2-82455532| E: sales@vivotek.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>