MUNBYN IRT09J Rugged Tablet User Guide

: June 15, 2024
: MUNBYN

IRT09J Rugged Table

Easy Setup Guide

Read thoroughly before using keep this for further reference.

Version 1.0.0

1.0 Packing Open and Installation

1.1 What’s in the Box

After unpacking the shipping carton, you should find these items:

No.	Name
1	IRT09J Rugged Tablet
2	AC Adapter
3	AC Power Cable
4	Lock Buckle of Carry Handle
5	Carry Handle
6	Hand-strap

1.2 Rugged Tablet Overview

1.2.1 Front Components

Ref	Component	Description
1	Microphone	Receives sound and voice for the tablet.
2	Stereo Speaker	Sends out sound and voice from the tablet.
3	Indicators	Up: The power on is always on blue, and the power off light is

1.2.2 Rear Components

Ref	Component	Description
1	Camera	Used toenable the camera function.
2	Flash Lamp	Fill light and lighting.
3	Cooling Fan	Used for radiating the flat plate (air inlet).
4	Battery Lock	Lock the battery cover.
5	Battery	Location of large battery.
6	Plastic Top Shell	The scanning head needs to be replaced.
7	Battery Lock	Lock the battery and remove it. ( Please refer to 1.3.)
8	Fingerprint	Fingerprint unlock.
9	NFC	NFC swipe card.
10	SSD	SSD interface location.

1.2.3 Right-Side Components

1.2.4 Left-Side Components

Ref	Component	Description
1	Cooling Fan	Used for radiating the flat plate (air outlet).
2	Interface Protection Cover	Play the role of protective interface, slide to

1.2.5 Bottom Components

Ref	Component	Description
1	Pogo Pin	Matched with the positioning hole to connect the Vehicle Mount

and Docking Charger for expanding USB, RJ45 and RS232 communication interfaces.
2| Locating Hole| It plays a fixed role when connecting the Vehicle Mount and Docking Charger.

1.2.6 Top Components

Ref	Component	Description
1	Module Port	Default:Network port Optional:1D code and 2D code Model
2	Handle Screw Position	Install M4 handle screw to facilitate the

installation of handle.

1.3 Battery, SIM card, TF installation

1.3.1 Install SIM&TF card

Refer to section 1.2.3, open the protective cover on the left side of the tablet.
With the back of the tablet as a reference, insert the SIM card in the direction indicated by the SIM interface markings or the image below.
To remove the SIM card or SD card, simply press the card and it will automatically pop out

Tips:
Inserting the SIM card in the wrong direction may cause damage to the SIM card or prevent it from popping out.

1.3.2 Uninstall Battery

To remove the battery, follow these steps:
When reinstalling the battery, make sure to align it with the slot as shown in the diagram.

2.0 Basic Operation

2.1 Start Using the Tablet.

This section explains in detail how to use the IRT09J rugged tablet and what you need to pay attention to in order to use it.

2.1.1 Connecting to AC Power
Note Use the included AC adapter to charge IRT09J. Don’t use other AC adapters, it might cause damage the tablet.

Connect the tablet to the AC adapter before using it for the first time.

2.1.2 Turning On and Off the Tablet
1. Turning On Press the power button ( ).
The Windows operating system should start.

2.Turning Off
When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode:

To…	Do this…
Power off (Shutdown)	Click →[ Power]→[Shut down].
Sleep	Use one of these methods:

Press the power button.
Click → [ Power]→[Sleep].

Tips:
“Sleep” is the default result of the action. You can change what the action does through Windows settings.

Operation:

Open the control panel
Power → Hibernate Management
Adjust to no hibernation/change hibernation time

2.2 Using the LAN

The built-in 10/100/1000M LAN (local area network) module allows your tablet to connect to the network. Plug one end of the network cable into the RJ45 interface of the tablet and the other end into the network hub.

2.3 Using the Wi-Fi

The Wi-Fi module supports WI-FI 6.

Turning On / Off the Wi-Fi
To turn on the Wi-Fi:
Click the icon in the lower right corner to open the network settings. Click to open the wireless network.

To turn off the Wi-Fi:
Tap the WiFi icon again to turn off WiFi.

Tips:
If you want to quickly turn off all radio frequencies at once, just turn on the Airplane mode.
Click the network connection icon in the lower right corner to open network settings and click Airplane mode.

Connecting to a Wi-Fi Network

Please make sure that the Wi-Fi function is enabled (as described above).
Click the network icon in the lower right of the taskbar.
In the list of available Wi-Fi, click a network, and then click Connect.
Some networks require a network security key or passphrase. To connect to one of those networks, ask your network administrator or Internet service provider (ISP) for the security key or passphrase.

2.4 Using the Bluetooth

Bluetooth technology allows short-range wireless communications between devices without requiring a cable connection.
Data can be transmitted through walls, pockets, and briefcases as long as two devices are within range.

Turning On / Off the Bluetooth

To turn on the Bluetooth: Click [Start] — Click [Settings] — Select [Bluetooth & Devices], then turn on “Bluetooth”.

To turn off the Bluetooth:
You can turn off the Bluetooth the same way you turn it on.

Connecting to another Bluetooth Device

Please make sure that the Bluetooth function is enabled (as described above).
Please make sure that the target Bluetooth device is turned on, discoverable, and within close range.
Click [Start] — Click [Settings] — Select [Bluetooth & Devices], then turn on “Bluetooth” — Select [Add a device].
Select the device you want to connect from the search results.
Enter the passcode when connecting to Bluetooth to complete the connection.

In Quick Settings: To find the quick settings for Bluetooth, select the Network, Sound, or Battery icon next to the time and date on the right side of the taskbar. Select Bluetooth to turn it on. If you turn it on without any Bluetooth devices connected, it may show up as “Not Connected”.

2.5 Fingerprint

Set up fingerprint
1)Open Settings ( ) –>Accounts –> Sign-in options.

Before entering fingerprints, you need to input the password to verify your identity.

3)Place the finger that needs to be registered on the fingerprint sensor, follow the on-screen prompts to complete the enrollment.

2.6 Using the Mobile Network

When you insert the SIM card, click the WiFi icon at the bottom right corner, and you will see the SIM card signal displayed.

Tips:
Inserting the SIM card in the wrong direction may cause damage to the SIM card or prevent it from popping out.

2.7 Use Virtual Keyboard

In the Win11 system, the virtual keyboard is turned off by default. You need to manually enable it the first time you use it.
Here is a tutorial on how to enable the virtual keyboard:

[Time & language] → [Typing].
[Touch keyboard] → Enble the [Show the touch keyboard when thers’s no keyboard attached] option.

2.8 Display Settings

Click [Settings] →[System ] →[Display] This is where you can adjust the screen brightness, resolution, and screen rotation.

3.0 FAQ

3.1 Battery Problems

Why is the device battery not charging? (The red indicator does not light up).

Please make sure that the AC adapter is properly connected.
Please make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature.
If the battery doesn’t charge after it has been stored in very low temperatures, try disconnecting and reconnecting the AC adapter to solve the problem.
Please make sure that the battery pack is installed correctly. (Please refer to section 1.3 for battery installation instructions.)
Please make sure that the battery terminals are clean.

Why does its operating time become shorter after the battery is fully charged?

If you often partially recharge and discharge the battery, it might not be charged to its full potential. Initialize the battery to solve the problem. (Fully charge in the shutdown state, discharge to 0%, and then fully charge the shutdown, cycle 2-3 times).
If this does not solve your problem, please contact technical support.

Why does the estimated operating time for battery power metering not match the actual usage time?

The actual operating time can be different from the estimated time, depending on how you are using the Tablet. If the actual operating time is much less than the estimated time, initialize the battery. (Fully charge in the shutdown state, discharge to 0%, and then fully charge the shutdown, cycle 2-3 times).

3.2 Bluetooth Problems

How to fix not being able to connect to other devices that have Bluetooth wireless technology?

Please make sure that both devices have activated Bluetooth features.
Please make sure that the distance between the two devices is within the limit and that there are no walls or other obstructions between the devices.
Please make sure that the other device is not in “Hidden” mode.
Please make sure that both devices are compatible.
If this does not solve your problem, please contact technical support.

3.3 WIFI Problems

Why can’t I use the wireless network function?

Please make sure that the WIFI feature is turned on.
Please check if you have entered your WIFI password correctly.

Why is the network transmission quality poor?

Your tablet may be in an out-of-range situation. Move your Tablet closer to the Access Point or another WIFI device it is associated with.
Check if there is high interference around the environment and solve the problem as described next.

Why is there radio interference?

Move your tablet away from the device causing radio interference such as microwave oven and large metal objects.
Plug your tablet into an outlet on a different branch circuit from that used by the affecting device.
Consult your dealer or an experienced radio technician for help.

Why can’t I connect to another wireless network device?

Please make sure that the WIFI feature is turned on.
Please make sure that the SSID setting is the same for every WIFI device in the network.
Your tablet is not recognizing changes. Restart the tablet.
Please make sure that the IP address or subnet mask setting is correct.

Why can’t I access the network?

Please make sure that the network configuration is appropriate.
Please make sure that the SSID setting is the same for every WIFI device in the network.
Your tablet is not recognizing changes. Restart the tablet.
Please make sure that the IP address or subnet mask setting is correct.

Why can’t I access the network?

Please make sure that the network configuration is appropriate.
Please make sure that the username or password is correct.
You have moved out of range of the network.

3.4 Display Problems

Why does the device screen not display?

The screen may automatically turn off as a result of power management. Please press any key to see if the screen comes back.
The brightness level might be too low. Please increase brightness.
The screen output may be switched to an external device. Please switch the display via Windows [Control Panel].

Why is the image on the device screen dark?

Adjust the brightness and/or contrast.
If this does not solve your problem, please contact technical support.

3.5 Hardware Device Problems

How to fix a tablet not recognizing newly installed hardware.

If the device requires a driver, please install the corresponding driver.
If the device does not need a driver, please plug and unplug the device again and add it to the device manager.
Check the cables or power cables for correct connections.
For an external device with its power switch, ensure the power is turned on.
If this does not solve your problem, please contact technical support.

3.6 Power Management Problems

How to fix tablet not sleeping or hibernating automatically or immediately.

Please make sure you have enabled the timeout setting for the standby or hibernate function.
If the Tablet is operating, it normally waits for the operation to finish.
If this does not solve your problem, please contact technical support.

Why can’t the tablet resume from standby or hibernate mode?

Please long press the on button to restart the machine.
The battery may be exhausted, please connect the power adapter and try to turn on the machine again.
If this does not solve your problem, please contact technical support.

3.7 Software Problems

How to fix application software not functioning properly.

Please make sure that the software is correctly installed.
If an error message appears on the screen, consult the software program’s documentation for further information.
If you are sure the operation has stopped, reset the tablet.

3.8 Sound Problems

How to fix tablet no sound issue.

Please make sure that the volume control is not set too low.
Please make sure that the tablet is not in Mute mode.
Please make sure that the tablet is not in Sleep mode.
If using an external speaker, make sure that the speaker is properly connected.

Why does the tablet appear distorted sound?

Please make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound.

3 .9 Startup Problems

Why does the system seem to be unresponsive when I turn on the computer?

Please check the battery installation.
Please connect an external power supply for 30 minutes of power and try powering on again.
If this does not solve your problem, please contact technical support.

3.10 Tablet Unresponsive Issue

When the tablet crashes due to a problem, you may need to restart the tablet.
Please reboot in one of the following ways:

Please use the external keyboard to press Ctrl + Alt + Del to bring up the Ctrl-Alt-Del screen. This screen provides several options including “Restart
If the above method does not work, press and hold the power button for more than 5 seconds to force the Tablet to shut down. Then turn it on again.
If this does not solve your problem, please contact technical support.

3.11 Tablet Driver Issue

After you reinstalled your system, if your tablet driver is missing, please download the driver from the following link: https://reurl.cc/QXD07o

You can contact us for support if you encounter any problems during the driver installation process.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Contact us

WhatsApp+86 133 0248 2997
Scan the QR code for WhatsApp online chat

MUNBYN provides an 18-month warranty and lifetime free service.
If you encounter any issues with the product, please contact the MUNBYN team to promptly receive troubleshooting tips or a replacement.

*Email:support@munbyn.com (247 online support)
Website:www.munbyn.com (how-to videos, warranty details)
Skype: +1 650 206 2250**

Version 1.0.0 Contact Us: WhatsApp+86 133 0248 2997