TELUS QS1133-840 Door Window Sensor Instructions
- June 15, 2024
- Telus
Table of Contents
TELUS QS1133-840 Door Window Sensor
Product Information
- Product: Qolsys Door/Window Sensor Model QS1133840
- Description: The Qolsys Door/Window Sensor model QS1133-840 consists of two pieces – a larger sensor and a smaller magnet. This sensor is used to detect the opening and closing of doors and windows.
Specifications
- Model: QS1133840
- Battery Type: CR2032
- Required Batteries: 2
- Equipment Required: small flathead screwdriver
Product Usage Instructions
Preparation
IMPORTANT: If you are a customer who uses myadt.ca, follow these steps before removing the sensor:
- Log into myadt.ca
- Tap on [Home]
- Tap on [Place on Test]
- Enter your expiration date and time
- Enter your password
- Tap on [Yes-Proceed]
Instructional Video Link
This instructional video provides a visual guide on how to replace the batteries inside your Door/Window Sensor. You can watch it here.
Battery Replacement Instructions
- Push the button on the bottom of the sensor to release and remove the cover.
- If the alarm panel starts beeping, you can silence it by entering your code.
- Remove the old batteries from the sensor.
- Insert the new CR2032 batteries into the sensor, ensuring they are properly aligned.
- Reposition the sensor cover by placing the top part of the sensor on first and then pressing down to secure the bottom into place. You should hear a click indicating it is properly secured.
- Arm and disarm the alarm system to clear any panel alerts.
Note: If the low battery alert does not clear or if the panel sensor shows tamper, repeat the above steps. Make sure the batteries are inserted correctly and that the sensor cover is securely in place.
Frequently Asked Questions (FAQ)
-
What type of batteries does the Qolsys Door/Window Sensor QS1133840 require?
The Qolsys Door/Window Sensor QS1133840 requires two CR2032 batteries. -
Can I silence the alarm panel during battery replacement?
Yes, if the alarm panel starts beeping, you can silence it by entering your code. -
What should I do if the low battery alert does not clear after replacing the batteries?
If the low battery alert does not clear, repeat the battery replacement steps, ensuring that the batteries are inserted correctly and that the sensor cover is securely in place. -
How do I clear panel alerts after replacing the batteries?
To clear panel alerts, arm and disarm the alarm system.
Description
This page shows battery replacement for Qolsys Door/Window Sensor model
QS1133-840. The larger of the two pieces is the sensor and the smaller is the
magnet.
Because there are many different versions of window/door sensors, it is
important to remove the sensor cover first to determine what kind of batteries
are required for your equipment. We advise you to check before purchasing
batteries.
Preparation
IMPORTANT customers who use myadt.ca
Before removing the sensor, place the panel on test mode through
myadt.ca. After logging in:
- Tap [Home]
- Tap [Place on Test]
- Enter your expiration date and time
- Enter your password
- Tap [Yes-Proceed]
This Video link illustrates how to replace the batteries inside your
Door/Window Sensor.
TELUS | Replace the batteries in your Door and Window Sensor (Gen 1)
Equipment Required
- 2 CR2032 batteries
- a small flathead screwdriver
Instructions
- Push the button on the bottom of the sensor and remove the cover
- The alarm panel may begin to beep; you may choose to silence the alarm by entering your code
- Remove old batteries and replace them with new ones
- Reposition the sensor cover by placing the top part of the sensor on first and then press down to secure the bottom into place, you should hear a click
- Arm and disarm the alarm to clear the panel alert
If the low battery alert does not clear or if the panel sensor shows tamper, walk through the steps above once more. It could be either the batteries or sensor cover are not on properly
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>