TELUS DGPC0049 Doorbell Camera User Manual
- May 15, 2024
- Telus
Table of Contents
TELUS DGPC0049 Doorbell Camera
What’s in the box
- Video Doorbell
- Mounting Bracket
- Level Tool
- Screws and Anchors
- USB Charging Cable
- User Manual
What you will need
- Drill
- Drill Bit
- Phillips Screwdriver
- Smartphone
Check doorbell
- Charge the video doorbell using the USB charging cable until the LED light on the front is solid green.
- Download the smart home app from the App Store or Google Play.
- Follow the in-app instructions to set up your device.
Turn off Breaker
Before installing the video doorbell, make sure the power to your existing doorbell is turned off at the breaker.
Test doorbell offline
Test the video doorbell by pushing the button on the front. If the LED ring spins white and you hear a chime, the doorbell is charged and working properly.
Wiring digital chime
If your home has a digital doorbell chime, a digital adapter must be installed for the video doorbell to work. Follow the wiring instructions provided with the digital adapter.
Wiring mechanical chime
If your home has a mechanical doorbell chime, proceed with the following steps:
- Disconnect your existing doorbell button.
- Loosen the terminal screws and attach the provided diode to the ‘Front’ and ‘Trans’ terminals on your chime. The diode ensures that the video doorbell is constantly powered.
- Connect the video doorbell wires to the same terminals.
Optional
If you’re not using the optional wedge, skip this step.
Mounting bracket
Secure the mounting bracket to your wall using the included level tool, screws, and anchors.
Pull wires through
Thread the doorbell wires through the middle of the mounting bracket.
Mark screw placement
Use the level tool to align the mounting bracket, then mark the screw placement. If you’re installing on brick, concrete, or stucco, use the included plastic anchors.
Attach mounting bracket
Drill holes at the marked positions, insert the anchors if necessary, and screw the mounting bracket into the wall.
Connect power wire
Attach the power wire to the back of the video doorbell by plugging it into the port.
Attach doorbell camera
Place the video doorbell onto the mounting bracket and secure it with the screws provided. Make sure it snaps into place.
Turn on Breaker
Once the video doorbell is securely attached, turn the power back on at the breaker.
Wait for LED light
Wait for the LED light on the front of the doorbell to light up, indicating it is powered and ready for use.
Specifications
| Feature | Description |
|---|---|
| Power | Hardwired (requires existing doorbell wiring) |
| Connectivity | Wi-Fi |
| Smartphone Compatibility | Android, iOS |
| Dimensions | Not specified |
FAQs
How do I know if my doorbell is charging?
The LED light on the front will be solid green when fully charged.
What kind of tools do I need for installation?
You will need a drill, drill bit, Phillips screwdriver, and a smartphone.
Can I install the video doorbell without a mechanical or digital chime?
Installation instructions are provided for systems with a mechanical or digital chime. Consult the user manual or support for alternative setups.
Is the video doorbell compatible with any smartphone?
The video doorbell is compatible with Android and iOS devices.
What do I do if the video doorbell doesn't power on after installation?
Ensure the power wire is properly connected and the breaker is turned on. Check for the LED light indication. If issues persist, consult the user manual or contact support.
(10-24 Vac,10VA)