TELUS 4K-WDB Wireless Digital Box Installation Guide
- June 2, 2024
- Telus
Table of Contents
TELUS 4K-WDB Wireless Digital Box
What’s in the box
Unplug cables connected to existing HD Digital Box
video cable connection
Determine your existing video cable connection
**HDMI video connection
** Component
Component / composite video connection
Use the provided breakout cable to connect existing component / composite cables to the 4K Wireless Digital Box.
Connect to power
Determine your network connection
Ethernet network connection
Connect the existing Ethernet cable to the 4K Wireless Digital Box.
Nice work, you’re all done!
Turn on the TV and follow the on-screen instructions.
NOTE
If you don’t see on-screen instructions, using your TV remote, change your TV to the correct input or source.
Wireless network connection
Press the OK button on your Optik TV remote to connect to your Wi-Fi network.
NOTE
If you don’t see on-screen instructions, using your TV remote, turn on the TV and change to the correct input or source.
Press WPS button on your modem for 10 seconds
The LEDs will begin flashing when the WPS button is released.
Nice work, you’re all done!
The TV screen will indicate wireless pairing was successful.
NOTE
If wireless pairing did not work, wait 5 minutes and repeat steps 9 – 11.|
Additional support