RGL-RGBLINK-D8 8K Presentation Scaler and Switcher LED User Guide
- June 15, 2024
- RGBlink
Table of Contents
D8
Quick Start
- 8K@60 input, HDCP 2.2 compliance
- Built-in 4” LCD touch screen control
- 8K EDID management
- Genlock synchronization unequal splicing, multiple splicing layouts available
- Layer cropping and scaling
- Genlock input and loop throuch
- XPOSE 2.0 control
- Support standard output resolution and customize output resolution
- Hot swap
- Open API
Overview
The D series has always been regarded as the leader in presentation-level
image quality processing at different display stages in the industry. D8
continues to lead the display technology to become an 8K@60-level video
processor in the industry. Create a visual experience. The D8 is standard with
one HDMI 2.1 (or DP 1.4) input interface port, which can meet the requirements
of 8K input signal transmission. The D8 is equipped with a 4-inch LCD touch
screen, which optimizes the overall front panel aesthetic design.
System Connection
RGBlink offers solutions to demanding technical problem. Any application
questions, or required further information, please contact with our customer
Support Engineers.
Packing Configuration
Note:
1. AC Power Cable supplied as standard according to destination market.
1. We offer 8K HDMI Cable for D8 (HDMI 2.1) model and 8K DP Cable for D8 (DP
1.4) model.
Hardware Orientation
Front Panel
| Name | Description |
|---|---|
| Touch Screen | 4-inch LCD touch screen allows you to directly control D8, which |
optimizes the user experience.
Rack Mount Ears| Use with the load-bearing screws to fix device on the rack.
Handles| For carrying device.
Rear Panel
| Name | Description |
|---|---|
| Input Interface | • D8 (HDMI 2.1) is standard with Single HDMI 2.1 Input |
Interface
• D8 (DP 1.4) is standard with Single DP 1.4 Input Interface
Output Interface| Standard with Quad HDMI 2.0 Output Module
Communication Interface| Standard with 1xRS 232 Serial Port，1xLAN Network Port
(preliminary），
1xIN-GENLOCK-LOOP Port (preliminary）
Power Interface| Connect standard power cable to device and plug into wall
socket
Power Switch| Power on or off the device
Interface Protector| Used to pull out device, fix cables and protect
interfaces from collision
Ground Screw| Increase the safety and reliability, and avoid accidents such as
fire and
explosion caused by static electricity
Install Your Product
Note: D8 (HDMI 2.1) and D8 (DP 1.4) are same in installation. This
chapter takes D8 (HDMI 2.1) as example.
Plug in Power
Connect power and D8 with standard Power Cord. Plug one end of the power cable
to the D8’s power interface.
The other end is connected to the power socket.
Connect Signal Source and Control Computer
Connect D8 with Camera ,PC, laptop as input signal, connect D8 with monitors,
as shown in the figure below.
Connect RS232 port of device and computer with serial cable to perform direct
connection via Serial
Connection. Then you can do control via XPOSE 2.0 software.
Turn on Your Product
Push the power switch on the rear panel and the system begins to work.
Use Your Product
Main Interface
Turn on D8, and the Main Interface includes Menu and SN serial number.
Note: Click the previous option to exit current interface step-by-step until back to Main Interface.
Device
Click
Settings
Click
Click
Output
Click
Standard Resolution
Select standard resolution and then click “Enter” to save and the touch screen
returns back to previous interface for you to double check.
Customize Resolution
Type in Width, Height and Frequency one by one and click “Enter”>“Save
Settings”. Then check the set resolution in
Split
Back to
Select layout, then set parameters, such as H Total, V Total of screen according to actual need. Use the numeric keyboard to enter parameters, then click “Save Settings” > “Confirm” to save above settings.
EDID
Back to
Customize EDID
Use the numeric keyboard to enter the Width, Height and Frequency one by one
and then click “Apply” > “Confirm”.
Note: The resolution on the signal source (such as a computer) needs to
be same as the D8. Refer to
Reset EDID
Click “Reset EDID”> “ Confirm” to clear previous settings.
Layer
Back to
Type horizontal position, Vertical position, Width and Height as needed. Then
click “Save Settings” > “Confirm” to save above parameters.
Load Presets
Back to Main Interface, then click
D8 provides 16 positions for saving banks. Yellow background: current bank; Green background: with parameter saved; Grey background: empty bank.
Note：Please do Scene Setting in XPOSE 2.0 firstly and then you can load bank.
Language
Back to Main Interface, then click
English and Simplified Chinese available.
Version
Back to Main Interface, then click
You can check Panel Version and Main Board Version.
XPOSE 2.0
Physically Connect Device to Computer
Use RJ11-DB9 serial cable to connect RS232 port of device and computer.
XPOSE 2.0 Operation
Download XPOSE 2.0 software from RGBlink website.
https://www.rgblink.com/xpose_software.aspx
Please refer to user manual of D8 for how to install and operate XPOSE 2.0.
https://rgblink-web.azurewebsites.net/productsinfo.aspx?id=232
Contact Information
Warranty:
All video products are designed and tested to the highest quality standard and
backed by full 1 years parts and labor warranty. Warranties are effective upon
delivery date to customer and are non-transferable. RGBlink warranties are
only valid to the original purchase/owner. Warranty related repairs include
parts and labor, but do not include faults resulting from user negligence,
special modification, lighting strikes, abuse(drop/crush), and/or other
unusual damages.
The customer shall pay shipping charges when unit is returned for repair.
Headquarter: Room 601A, No. 37-3 Banshang community, Building 3, Xinke Plaza,
Torch Hi-Tech Industrial Development Zone, Xiamen, China
- Tel: +86-592-5771197
- Fax: +86-592-5788216
- Customer Hotline: 4008-592-315
- Web: http://www.rgblink.com
- E-mail: support@rgblink.com
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com |
www.rgblink.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>