hama 00 223342 Socket Adapter Instruction Manual

: June 3, 2024
: Hama

Table of Contents

hama 00 223342 Socket Adapter
Explanation of warning symbols and notes
Safety instructions
USB operation
Care and maintenance
Warranty Disclaimer
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 00 223342 Socket Adapter

hama 00 223342 Socket Adapter-PRO

Explanation of warning symbols and notes

Risk of electric shock: This symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage.
Warning: This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note: This symbol is used to indicate additional information or important notes

Package contents

Power strip
These operating instructions

Safety instructions

Use the product only for the intended purpose.
Do not operate the product outside the power limits specified in the technical data.
Protect the product from dirt, moisture and overheating and use it in dry environments only.
Do not use the product in a damp environment and avoid splashing water.
Do not continue to operate the product if it is visibly damaged.
Do not bend or crush the cable.
Do not drop the product and do not expose it to any major shocks.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
As with all electrical products, this device should be kept out of the reach of children.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
The product is intended for private, noncommercial use only
The product is intended only for use inside buildings.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Only use the article under moderate climatic conditions.
Do not use the product in areas in which electronic products are not permitted.
Route all cables so that there is no risk of tripping.
Never connect multiple units of this product in series.
The product must only be operated on a supply network as described on the type plate.

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Warning

Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
If you will not be using the product for a prolonged period, disconnect it from mains power

USB operation

Warning – Connection of devices

Before connecting a device, check whether it can be adequately supplied with the charger’s current delivery.
Ensure that the total output of all the connected devices does not exceed 20 W.
Note the instructions in your device’s operating manual.

Note – Power Delivery

Plug & GO: no additional software required, simply plug in and start: Thanks to Power Delivery, the voltage and power are adjusted automatically.
Be aware that, for efficient and optimised charging, your terminal device must support the PD (Power Delivery) function.
If you have a large number of PD-enabled devices with different firmware updates, it may be that the function is not fully supported

Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:

Connect your device to a USB charging port using a suitable USB cable.
Connect the charger to a properly installed and easily accessible mains socket.
The charging process is displayed on your device.
Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
Then disconnect the charger from the line connection.

Care and maintenance

Note: Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Ensure that no water is able to enter the product

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.