GIMA 27418 Chrome Plated Paper Roll Instructions

GIMA 27418 Chrome Plated Paper Roll

Product Information

The product is a medical device manufactured by Gima S.p.A., an Italian company located in Gessate (MI). The device falls under the CLASS I MEDICAL DEVICES category according to Regulation (EU) 2017/745. It is designed for use in medical settings and should be used as instructed in the manual.

The product consists of the following components:

• Tube to insert the roll
• Fixing supports equipped with black plastic washer

The assembled size of the product is 6.8 x 2.5 x 3.5 cm, and it weighs 1 kg. When supplied disassembled, the size is 6.8 x 10 x 3.5 cm.

Product Usage Instructions

Before using the device, read the manual carefully and follow the instructions provided. Ensure that you avoid direct contact with open wounds and do not use the product outdoors.

Assembly Instructions:

1. Secure the fixing supports to the bed legs using the black plastic washer. Avoid over-tightening.
2. Find the correct position and insert the roll into the tube.
3. Slide the tube into the special hooks on the supports.
4. Tighten the washers to securely attach the supports to the bed legs.

Maintenance and Cleaning:

• Only use original spare parts for maintenance.
• Periodically check all fixing points to ensure they are secure.
• Avoid prolonged exposure to sunlight, contact with saline environments, and storage in very damp environments to maintain efficient and long-term use.
• Wash the stainless steel surfaces with soapy water and suitable disinfectants.
• Rinse with a damp cloth and dry carefully.
• Do not pour chlorine- or ammonia-based detergents or greasy and oily substances on the surfaces.
• Do not use metal tools for cleaning. If disinfection is required, only use suitable non-corrosive products.

Keep the product away from sunlight, store it in a cool and dry place, and consult the instructions for use for specific product codes, manufacturer details, date of manufacture, and lot number.

Caution: Read the instructions (warnings) carefully before using the device.

The product is covered by Gima’s standard B2B warranty for a duration of 12 months.

All serious accidents concerning the medical device supplied by us must be reported to the manufacturer and competent authority of the member state where your registered office is located.

Gima S.p.A.
Via Marconi, 1 – 20060 Gessate (MI) Italy
gima@gimaitaly.com
export@gimaitaly.com
www.gimaitaly.com
Made in Italy

INTRODUCTION

For the purposes of Regulation (EU) 2017/745, the product falls under the CLASS I MEDICAL DEVICES category. We advise you to read the following manual carefully before using the device.

DESCRIPTION

Chrome-plated paper roll holder suitable for bed legs, with a round tubular section from Ø 25 to 40 mm and square from 25×25 to 35×35 mm. (Supplied disassembled and without paper roll)

COMPONENTS

Tube to insert the roll
Fixing supports equipped with black plastic washer

INSTRUCTIONS FOR ASSEMBLY

Secure the supports to the bed legs using the plastic washer, without over- tightening. Once the correct position has been found, insert the roll and slide the tube into the special hooks. Finally, tighten the washers to secure the support to the bed legs.

TECHNICAL DATA SHEET

• Size
  Assembled 68x25x3.5 cm (supplied disassembled 68x10x3.5 cm)

• Weight
  1 kg

INSTRUCTIONS FOR USE

• Follow the instructions given in this manual carefully.
• Avoid direct contact with open wounds.
• Not suitable for outdoor use.

MAINTENANCE AND CLEANING

• Only use original spare parts.
• Periodically check all fixing points.
• To ensure its efficient, long-term use, it is advisable to avoid prolonged exposure to sun rays, contact with saline environments and storage in very damp environments.
• Wash the stainless steel surfaces with soapy water and use suitable disinfectants.
• Rinse with a damp cloth and dry carefully.
• Do not pour chlorine- or ammonia-based detergents or greasy and oily substances on the surfaces.
• Do not use metal tools for cleaning. If disinfection is required, only use suitable non-corrosive products.

GIMA WARRANTY TERMS

The Gima 12-month standard B2B warranty applies.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>