kinderkraft FOLDEE Baby High Chair User Guide
- June 15, 2024
- Kinderkraft
Table of Contents
FOLDEE Baby High Chair
User Guide
FOLDEE Baby High Chair
HIGH
QUALITY STANDARD
Available only in selected countries
Details on www.kinderkraft.com
All rights to this data are entirely reserved to 4Kraft Sp. z o.o. Any
unauthorized use or misuse, including usufruct, copying, duplication and
sharing, wholly or partially, without consent of 4Kraft Sp. z o.o. may result
in legal consequences.
The illustrations are for illustration only and do not represent the product.
|
---|---
Dear customer!
Thank you for choosing a product by Kinderkraft. Our designs are child-
oriented – safety and quality always comes first, stay comfortable knowing
that you have made the best choice.
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
SAFETY INSTRUCTIONS AND PRECAUTIONS
WARNING!
- Never leave the child unattended.
- Always use the restraint system.
- Falling hazard: Prevent your child from climbing on the product.
- Do not use the product unless all components are correctly fitted and adjusted
- Be aware of the risk of open fires and other sources of strong heat in the vicinity of the product.
- Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
- Do not use the product until the child can sit up unaided.
- Don’t use the product if any part is broken, torn or missing.
- High chair is intended for children able to sit up unaided and up to 36 months or a maximum weight of 15 kg.
- Always check the security and the stability of product before use.
- Make sure that any harness is correctly fitted.
- Do not move or lift the product while the child is inside.
- Accessories or replacement parts other than those approved by the manufacturer must not be used.
- Keep children away when unfolding and folding the product to avoid injury.
- Product located under a window could be used as a step by the child and cause the child to fall out of the window.
Parts
- Seat
- Front and back legs
- Double tray
- Footrest
- Fabric basket
Assembly and adjustment
Legs
Remove the foam pads from the tube ends before assembly. To unfold the seat
(1), pull the backrest (fig. A). Pull the backrest towards you until you hear
a characteristic ‘click’ (fig. B). Mount the legs (2) to the seat (1). To do
this, turn the seat upside down. Insert the legs (2) into the tubes so that
the pins are in the holes of the legs (1) (fig. C). A characteristic ‘click’
indicates correct assembly. Repeat for the back legs (2). Stand the chair on
its legs.
Tray
Attach the plastic tray (3) to the chair using the snap mechanism. Press the
two buttons under the tray, and slide the tray into the guides on both
armrests (fig. D).
The tray (3) can be set in one of three positions – the marking is on the
armrests (fig. E). When a certain position is reached, you will hear a
characteristic click.
In addition, check that the tray is correctly secured on both sides.
The top layer of the tray can be removed to wash it.
Footrest
Then mount the footrest (4). As with the leg assembly, insert the tube with
the pin into the designated hole (Fig. F). A characteristic ‘click’ indicates
correct assembly. The footrest can be set in two different positions by
pushing in the pin and adjusting the appropriate level.
WARNING! Do not stand on the footrest.
Backrest adjustment:
The backrest of the chair can be set in three positions (fig. G). To adjust
the angle of the backrest, lift the lever at the back, tilt the backrest and
put it in the desired position, then release the lever. The backrest will lock
automatically and a locking sound will be heard.
Safety harness:
WARNING: The use of a safety harness is essential to ensure the safety of
the child. Using the tray alone does not provide proper support for the child.
Always use the safety harness. The safety harnesses are adjustable and can be
fitted in two positions depending on the height of the child.
Fastening the safety harness:
Connect the shoulder, lap and crotch harness in the buckle. The correct
fastening of the harnesses is shown in figure H. Adjust the length of the
harnesses to suit the child.
Removing the safety harnesses:
Press the button in the middle of the buckle to release the safety harness.
Assembly of fabric basket
The fabric basket (5) should be attached to the chair using straps, which are
passed through the tubes, located under the seat, and then fastened with press
studs ( fig. I). Maximum load of the basket is 3 kg.
Disassembly
To fold the chair pull down the tray (3). Press both buttons under the tray and slide the tray towards you (fig. J). Then press the two buttons on the armrests (fig. K) and fold the backrest downwards as shown in fig. L. The completely dismantled tray can be hung on the metal tube running between the legs (fig. M). To remove the footrest (4) press the pin and slide the footrest towards you (fig. N).
Cleaning
Chair: Clean with a clean and damp cloth and mild soap. Do not bleach. Do
not tumble dry. Do not iron. Do not dry clean.
Harness: Fasten harnesses together. Clean with a clean and damp cloth,
and mild soap. Do not bleach. Do not tumble dry. Do not iron. Do not dry
clean.
Wash the mesh toy basket by hand. Do not bleach. Do not tumble dry. Do not
iron. Do not dry clean.
Explanation of maintenance symbols:
| Hand wash.
---|---
| Do not wash
| Do not dry in a tumble dryer
| Do not dry clean
| Wash at max. 30°C, gentle process.
| Do not bleach
| Do not iron
STORAGE
Store the product folded and out of the reach of children.
In the interests of our Clients – we are at your disposal! If you have a
problem with the product you received, contact us in the most convenient way
for you!
International: support@kinderkraft.com
(0048) 61646 02 37
kinderkraft.com
kinderkraftofficial
kinderkraft
kinderkraftofficial
MANUFACTURER
4Kraft Sp. z o. o. street Tatrzańska 1/5 60-413 Poznan, Poland
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>