DIGITUS DN-10136 Port RJ45 2.5 Nic Gbits Server Installation Guide
- June 15, 2024
- DIGITUS
Table of Contents
DIGITUS DN-10136 Port RJ45 2.5 Nic Gbits Server
Product Information
Specifications:
- Model: DN-10136
- Port Type: RJ45
- Speed: 2.5 GBits
- Chipset: RTL8125B
Main Features:
- High-speed data transfer with a speed of 2.5 GBits
- Easy installation and setup
- Compatible with various systems
Package Contents:
- 1 x 4 Port RJ45 RTL8125B 2.5 GBits Server NIC
- Quick Installation Guide
System Requirements:
To use the product, your system should meet the following requirements:
- A computer with an available adapter slot
- Power cord
- Operating system compatible with the drivers and software provided
Product Usage Instructions
Hardware Installation:
- Turn off the computer and unplug the power cord.
- Remove the computer cover and the adapter slot cover from the slot that matches your adapter.
- Insert the adapter edge connector into the slot and secure the bracket to the chassis.
- Replace the computer cover, then plug in the power cord.
- Power on the computer.
Install Drivers and Software:
Follow the steps below to install the necessary drivers and software:
- Ensure that your computer is connected to the internet.
- Insert the provided installation CD or download the latest drivers and software from the manufacturer’s website.
- Run the installer and follow the on-screen instructions to complete the installation.
Declaration of Conformity:
Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is
part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the manufacturer’s address.
Frequently Asked Questions (FAQ):
-
Q: Where can I find the latest drivers and software for this product?
A: You can download the latest drivers and software from the manufacturer’s website or use the provided installation CD. -
Q: Is this product compatible with macOS?
A: Yes, this product is compatible with macOS. Please ensure to download and install the appropriate drivers and software for macOS.
Introduction
The DN-10136 PCIe Quad-Port 2.5G network adapter is realized by the combination of multiple chips, it combines a four-speed IEEE802.3 compatible Media Access controller with a four-speed Ethernet transceiver, it is complying with the IEEE802.3u specification for 10//100Mbps Ethernet, the IEEE802.3ab specification for 1000Mbps Ethernet and IEEE802.3bz specification for 2500 Mbps Ethernet. Also, it offers high-speed transmission over CAT5e UTP cable OR CAT3 UTP (10Mbps only) cable. It is suitable for multiple market segments and emerging applications, such as desktops, workstations, servers, communications platforms, and embedded applications.
Main Features
- Support PCI Express Specification Revision 2.1
- 2-Lane PCI Express bus connecting with up to 10Gbps bus width
- PCI Express interface: x4
- Integrated 10M BASE-Te and 100/1000M/2.5G base-T 802.3 compatible transceiver
- Supports 2.5G and 1G Lite mode.
- Auto-Negotiation with Extended Next Page capability (XNP)
- Supports pair swap/polarity/skew correction.
- Crossover Detection& Auto-Correction
- Supports 1-Lane 2.5/5Gbps PCI Express Bus
- Supports hardware ECC (Error correction code) function.
- Supports hardware CRC (Cyclic Redundancy Check) function.
- Supports PCI MSI (Message Signaled Interrupt) and MSI-X
- Transmit/Receive on-chip buffer support.
- Supports ECMA-393 ProxZzzy Standard for sleeping hosts.
- Wake-On-LAN and ‘RealWow!’ Technology (remote wake-up) supports.
- Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab
- Supports IEEE1588v1, IEEE1588v2, IEEE80.2AS time synchronization.
- Supports IEEE802.1Qav credit-based shaper algorithm.
- Supports IEEE802.1P Layer 2 Priority encoding.
- Supports IEEE802.1Q VLan tagging.
- Supports IEEE802.1ad Double VLAN
- Supports IEEE802.3az (Energy Efficient Ethernet)
- Supports IEEE802.3bz(2.5GBase-T)
- Supports full duplex flow control (IEEE802.3x)
- Supports jumbo frame to 16K bytes.
- Supports Virtual Machine Queue (VMQ)
- Supports quad-core Receive –Side Scaling (RSS)
- Supports Protocol Offload (ARP&NS)
- Drivers for Vista /Win7 / Win8 / Win10 /Win11/ Sever2008 /Sever 2012 / Linux / DOS
- Chipset: RTL8125B+ASM1806
Package Contents
- 1x PCIe Quad-Port 2.5G network adapter
- 1x User’s Manual
- 1x CD
- 1x Low profile bracket
System Requirements
- Linux, Win7/ Win8/ Server2008/ Win8.1/ Server2012/Win10/ Win11
- One available PCI Express x4/x8/x16 slot
Hardware installation
- Turn off the computer and unplug the power cord.
- Remove the computer cover and the adapter slot cover from the slot that matches your adapter.
- Insert the adapter edge connector into the slot and secure the bracket to the chassis.
- Replace the computer cover, then plug in the power cord.
- Power on the computer
Install Drivers and Software
Windows Operating Systems
-
Please insert the CD driver bound into your CD-ROM Drive.
-
Double-click to open the CD-ROM drive and find the driver corresponding to the system.
-
For Windows® Win7, Server 2008 R2(32/64 bit)
Type “RTL8125\Windows\Win7Server2008 R2\ Install Win7_ 7127_10222019\setup.exe”, Double-click it. -
For Windows® Win8, Win8.1 Server2012(32/64 bit)
Type RTL8125\ Windows\ Win8_8.1Server2012\Install Win8 _8.1_8073_10222019 \setup.exe”, Double clicks it. -
3.3 For Windows® Win10 (32/64 bit)
Type “RTL8125\Windows\Win10\Install_Win1010036 10222019\setup.exe”, Double clicks it. -
3.4 For Windows® Win11 (32/64 bit)
Type “RTL8125\Windows\Win11\Install_PCIEWin11 11.4.1201.2021_01182022.exe”
Follow the on-screen instructions to complete the installation.
Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below-mentioned manufacturer address.
www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>