Coromatic UPS KR-RM Li Series User Guide
- June 12, 2024
- Coromatic
Table of Contents
Coromatic UPS KR-RM Li Series
Product Information
The UPS KR-RM Li series is an online UPS with an integrated Lithium battery. It is designed for backup power with short backup times. The UPS is easy to install and operate, and it offers the option for floor or rack mounting with a swiveling front panel. The integrated Lithium battery has a long lifespan. The UPS is also pluggable, allowing for easy maintenance and replacement.
Product Usage Instructions
- Choose the appropriate power capacity (1kVA, 2kVA, or 3kVA) based on your power requirements.
- Decide whether you want to mount the UPS on the floor or in a rack. The front panel can be swiveled for easy access.
- Connect the UPS to the rectifier input using L/N: 208/220/230/240V AC power source.
- If necessary, connect the bypass input to a power source within the range of 120-295V (176-295V at 100% load).
- Choose the battery voltage option (24V DC, 48V DC, or 72V DC) based on your requirements.
- Connect the battery output to your devices using the appropriate sockets. For a 1kVA UPS, use 4 x IEC C13 sockets. For a 2kVA UPS, use 6 x IEC C13 sockets and 1 x IEC C19 socket.
- Ensure that the load does not exceed 115% of the UPS capacity to avoid overload. If an overload occurs, the UPS will protect against it for up to 1 minute.
- If communication options are available, refer to the user manual for instructions on how to set up and utilize them.
Features
- line UPS 1-3kVA w/integrated Lithium battery
- Integrated Lithium battery for short backup times
- Simple installation and operation
- Optional floor or rack mounting with rotatable front panel
- Long battery life
Pluggable Online UPS
- It can be mounted on the floor or in a rack, floor stand, rack brackets and rack rails are option.
- WEB/SNMP card, relay card, manual and bypass are optional. The model cannot expand the battery capacity.
Specifications
Power kVA/kW /1kVA/0.9kW /2kVA/1.8kW /3kVA/2.7kW
Input/Output /1-phase /1-phase
- Rectifier input
- Voltage: L/N: 208/220/230/240V AC
- Tolerance: 120-295V (176-295@100% load)
- Frequency: 50-60Hz ± 10%
- Power factor: 0.99
- Bypass input
- Voltage: L/N: 208/220/230/240V AC
- Frequency: 50/60 ±3Hz
- Bacteria
- Spenning: 24V DC /48V DC /72V DC
- Battery time (70%): 11 min /11 min /11 min
- Exit
- Voltage: L/N: 208/220/230V AC ±1%
- Frequency: Follows bypass in (Normal mode), 50/60±0.2% in battery mode
- Outputs: 4 x IEC C13 /6 x IEC C13 + 1 x IEC C19
- Overload: < 115% 1min, <133% 1sec, <150% 0.2sec
- Environment
- Operating temperature: -5-40°C (20°C for optimal battery life)
- Storage temperature: -40-70°C
- Relative humidity: 0%-95% non-condensing
- Operating altitude: 0-1000m. Over 1000m power reduction according to EN/IEC 62040-3
- Noise: <50dB /<55dB
- Other
- Sertifisering: EN/IEC 62040-1; EN/IEC 62040-2; EN/IEC 62040-3; CE; CB; RoHS, REACH, WEEE, etc
- Communication: USB + RS232 (Option Relay card/RS485/SNMP)
Contact
Coromatic AS
- Tel: 22 76 40 00
- salg@coromatic.no
- www.coromatic.no
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>