Gallop Max R134A AC Oil Dye Injector Kit Instructions

: June 15, 2024
: Gallop Max

Table of Contents

AC PRO GRADE OIL DYE INJECTOR KIT
AC PRO GRADE OIL DYE INJECTOR TOOL
Expanded instructions
Kit Includes
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Gallop Max R134A AC Oil Dye Injector Kit

AC PRO GRADE OIL DYE INJECTOR KIT

Our tool kit is compatible with R134A and R1234YF air conditioningsystems and which is designed to inject oil into A/C system. Come on here and I’ll show you each of the accessories.

2 OIL CHECKERS
**20Z MEASURING CUP

**

Oil Checkers are commonly used to give air conditioning systems a check. Remove its cap and press it into the low-pressure side port, and it goes to work.
If the Oil Checkers are brown or black after the test, you should clean your air conditioning system.
If the Oil Checkers are slightly clear and greasy after the test, then this is the condition you want.

R1234YF QUICK COUPLER
R134A QUICK COUPLER

Here is the tool we’re going to be using. Select the same type of coupler as the auto air conditioning system and connected.

AC PRO GRADE OIL DYE INJECTOR TOOL

It is a refillable expandable injector. It’s the type that you twist the outer tube forces the oil into the system.
The most common uses for an oil injector are: You’ve got a leak.
You want to put in some oil and/or UV dye. Or: You flushed and recharged your system but didn’t put in enough oil.

Expanded instructions

Start the car A/C system and set to maximum cool. Leave a door open and/or heat on in car to keep the system working at full capacity.
Set the injector to a bit more than the amount of oil you want to put in and take off the top. Pour in oil that’s right for your refrigerant up to the bottom of the threads.
Screw the top on and screw in the threaded plunger until oil starts to come out of the hose thus purging air. Put on the R-134 adapter or R-1234YF adapter.
Connect to the low pressure service port. If possible keep the body above the port while injecting so any remaining bubbles of air don’t go in.
Steadily screw in the plunger until all the oil is injected. Take a minute or so doing this — you want the oil dispersed in the refrigerant.
Disconnect — done! Wipe off oil on the injector.
The box would be a good place to store it so it won’t get dirty.