AUKEY SW-1S 1.69 Inch TFT LCD Display SmartWatch User Manual

User Manual
Smart Watch

Thank you for purchasing the AUKEY Smart Watch 1 S. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number.

Product Diagram

Specifications

Getting Started

Wearing
For maximum comfort, it’s recommended that you wear the watch one finger-width away from your wrist bones with the strap fastened firmly but not too tight.
Note: A loose watch strap on your wrist may affect data collection of the sensors.
Installing the AUKEY Wearable App
Long-press the multi-function button to turn on the watch, and use your phone to scan the QR code on the watch screen or below to download and install the “AUKEY Wearable” app for data sync. This app is also available in your phone’s app store.

https://icare.eiot.com/app/aukey/download.html

Note: For stable and continuous connection between AUKEY SW-1 S Smartwatch and AUKEY Wearable App, please ensure that the BT function of your device is on and AUKEY Wearable App on your device is running in the background.
Pairing
Follow in-app instructions to pair the watch with your phone via BT.
Charging

1. Connect the charging cable to a standard 5V USB charger with 1A output.
2. Connect the charging cable to the watch with the metal charging contacts in proper contact.

Notes

1. Charge the watch for over 2 hours before the first use.
2. If the watch battery is completely drained, the watch may take 1 minute to show the charging status icon after being connected to power.
3. Gently clean and dry the charging contacts before charging.

Operating the Watch

1. Swipe down from the top of the homepage to open quick settings.
2. Swipe up from the bottom of the homepage to open notifications.
3. Swipe left across the homepage to switch to other main pages.
4. Swipe right from the left edge of the homepage to open common functions.
5. Swipe right from the left edge of pages within other functions to go back a level.
6. press and hold on the homepage for 3 seconds to quickly switch watch faces.
7. Press and hold the multi-function button for 3 seconds to turn on/off the watch.
8. Short-press the multi-function button to return to the homepage from other main pages or go back a level from within other functions
9. Short-press the multi-function button to pause or resume an activity

Note: Practical operation may vary slightly from the description above. Please refer to in-app instructions for guidance on operation.

Functions

Switching Watch Faces
Press and hold on the homepage for 3 seconds to quickly switch watch faces.

Workout
Jogging, walking, fishing, swimming, rope jumping, gymnastics, dancing, Tai Chi, treadmill running, mountain climbing, stair climbing, weightlifting, dumbbell training, hiking, cycling, spinning, rowing, elliptical, hockey, yoga, basketball, soccer, football, volleyball, cricket, and badminton and more.

| Bluetooth Calls
Answer or make phone calls on the smartwatch
---|---
| Activities
Check your daily activity data.
| Heart Rate
Continuous heart rate monitoring and you can view previous heart rate data anytime.
| Stress
Check how much psychological pressure you are feeling.
| Blood Oxygen
Manually measure your blood oxygen level.
| Sleep
Records of your sleeping time & states in detail.
| Sleep
Records of your sleeping time & states in detail.
| Sleep
Records of your sleeping time & states in detail.
| Music Control
Control the music player of your phone to play, pause as well as switching tracks and volume adjusting (Music can’t be stored on the
watch).
| Voice Assistant
Activate the voice assistant on your phone.
| Stopwatch
Precisely time events.
| Timer
Set a countdown timer.
| Weather:
Check the weather conditions and real-time temperature.

Product Care & Use

1. Avoid tight watch wearing in daily use and keep the area of watch contact clean & dry. Rinse the wrist strap regularly. If you experience skin irritation from wearing the watch, take it off and consult a doctor.
2. Do not operate the watch underwater. Wipe off water before pressing the button or operating the touchscreen.

FAQ

1. How to connect the smartwatch to my phone via Bluetooth?

2. How can I reconnect if my smartwatch is disconnected from my phone?

(1) Make sure the Bluetooth is turned on and the watch is close to the phone; (2) If you can't connect the watch, enter the watch device page, restart the watch and re-enter the APP; (3) If the above practices still can't solve the problem, please try to restore the watch to factory settings and reconnect.

3. Why does the motion track not show up?

The watch does not have GPS, it needs to record the movement track from cell phone GPS data, if you need to record the movement track, please follow these steps: (1) Ensure the cell phone GPS (location information) is turned on; (2) Ensure the APP and the phone is connected; (3) Try to exercise outdoors, the GPS signal is generally better outdoors.

4. How to restore to factory settings?

5. When the watch is disconnected from the corresponding APP, can other people connect to the watch after downloading the APP?

No. Once the watch is paired in the APP, it can only be connected to the corresponding device, unless the watch is restored to factory settings or unpaired to the APP.

6. How to synchronize the watch data to APP?

Make sure the watch and APP are paired, and the watch data will be automatically synced to APP.

7. How to check the sports record?

You can check the exercise record on the status page of the APP.

8.How to switch watch faces?

Warning:

1. The heart rate, blood oxygen data obtained through the SW-1S smartwatch are for reference only and cannot be used as a basis for medical treatment and diagnosis.
2. Self-diagnosis and treatment may lead to fatal results. Only a professional doctor can diagnose and treat related diseases such as hypertension and heart disease. It is recommended to contact a doctor for more professional diagnosis advice.
3. The heart rate, blood pressure and other data provided by the smartwatch may not be completely accurate due to environmental signal interference, wearing posture, changes in the climate environment, and each person’s different physical conditions;
4. Do not adjust the dosage and treatment according to the monitoring data provided by the smartwatch without permission. When you need to take medicine and treatment, you should follow the doctor’s orders, The company is not legally responsible for the accuracy of the monitoring data and the consequences of misuse of the monitoring data.

Warranty & Customer Support

For questions, support, or warranty claims, please contact your seller directly.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF wamings for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

References

• AUKEY Official | Unlock More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>