AUKEY LC-MC10 Wireless Charging User Manual

: June 15, 2024
: Aukey

Table of Contents

AUKEY LC-MC10 Wireless Charging
Product Information
Product Usage Instructions
Charging Your USB Devices
Product Care and Precautions
Contact
Declaration And Warranty
FCC Statement
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AUKEY LC-MC10 Wireless Charging

AUKEY-LC-MC10-Wireless-Charging-product

Product Information

Model: LC-MC10
Weight: 105g
Dimensions: 60X80mm
Compatibility: iPhone 12/13/14/15, Android
Manufacturer: Aukey Technology Co., Ltd.
Website: www.aukey.com
Email: support@aukey.com
FCC ID: 2ATIH-LC-MC10

Specifications

Weight: 105g
Dimensions: 60X80mm
Compatibility: iPhone 12/13/14/15, Android

Product Usage Instructions

Charging Your USB Devices

To charge your USB devices using this product, follow these steps:

Ensure that the product is connected to a power source.
Connect your USB device to the product using a compatible USB cable.
The device will start charging automatically.
Monitor the charging progress and disconnect the device once it is fully charged.

Product Care and Precautions

To ensure the longevity and safe usage of this product, please adhere to the following care and precautions:

Avoid disassembling or modifying the product, as it may cause damage or accidents such as fire or electric shocks.
Avoid exposing the product to extreme temperatures, moisture, or liquids.
Keep the product away from children and pets.
Do not place any objects other than compatible devices on top of the product.
Regularly clean the product using a soft, dry cloth to remove dust and debris.

Charging Your USB Devices

AUKEY-LC-MC10-Wireless-Charging-fig-1

Note

This wireless charger can provide magnetic alignment for iPhone 12/13/14/15 series.
This wireless charger is able to provide fast charging up to 15W for iPhone 15 and later models, as well as select Android smartphones.

Product Care and Precautions

Keep away from liquids and extreme heat.
Do not leave it in humid, extremely hot or cold place for a long time.
It is normal for the device to heat up slightly when charging. If it gets too hot to operate, stop charging immediately.
The body and internal electronic components may break down, leading to an accident such as fire or electric shock. Do not disassemble or modify.
When disposing of this product, follow the instructions of each local government and dispose it correctly.

Contact

Follow Us to Unlock More about AUKEY:

FB: @AUKEYofficial
INSTA: @aukeyofficial
TWITTER: @AUKEYofficial
YOUTUBE: AUKEYofficial

Contact

Model: LC-MC10
Aukey Technology Co., Ltd.
www.aukey.com
support@aukey.com
Room 102, Building P09, South China City, Electronic trading center, Longgang District, Shenzhen, China
FCC ID: 2ATIH-LC-MC10

CE: This product complies with the radio interference requirements of the European Community.

Declaration And Warranty

Declaration of Conformity

This product is intended for use within Europe. This equipment compiles with the essential requirements for the Radio Equipment Directive 2014/53/EU. AUKEY Technology Co, Ltd. hereby declares that this product LC-MC10 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU, 2014/30/EU. The Declaration of Conformity for the LC- MC10 is available from www.aukey.com

Warning

Do not place anything other than compatible devices on top of this product.
Charging while there is an object (especially metal) between the product and a device may cause heat or fire. Remove the case or smartphone ring that contains metal before charging.
If you use a cardiac pacemaker, consult your doctor before using this product.
Do not bring magnetic cards (credit cards, cash cards, etc.) close to the product. Please note that we are not responsible for any damage to card data due to the influence of magnets.

Warranty & Customer Support

For questions, support, or warranty claims, please contact your seller directly.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.