FOSHAN BB006 Baby Swing Chair User Manual
- June 15, 2024
- Foshan
Table of Contents
BABY AUTO SWING
USER MANUAL
IMPORTANT! KEEP IT FOR FUTURE REFERENCE.
Before installing and using, please follow the instructions
carefully to ensure the safety of your baby.
Product Introduction
Product Specification:
Product Name | Baby Auto Swing |
---|---|
Model Number | BBOO6H |
Input Voltage | 100-240V- |
Output Voltage | 5V |
Output Current | 1A |
Frequency | 50/60Hz |
Application | Children up to a weight of 9 kg or unable to sit up unaided |
Main Material | 100% polyester fiber, aviation aluminum base bracket |
Certificate | EN12790,EN16232,ASTM F2088-20,ASTM F963-17 |
Product Features:
- Swinging from side to side, with five gears mimicking human movement.
- Protecting baby’s spine design on the basis of human engineering.
- Power supplied by safe SV low voltage adapter.
- One-button installation and disassernbly, simple and convenient to use,
- Seat cover made of environmental-friendly super soft fabric and non-textile, cozy, breathable and safe & removable and machine washable seat fabric.
- Made of alurninum alloy base with light weight and strong hardness quaranteeing safety for baby.
- Controlled by touching screen or remote controller, easy to operate
- With motion lock and safety belt for protection.
- With built-in soft nature sounds & Bluetooth enabled for music.
Parts Instruction
Make sure that all of the following parts listed are included in the box If any Part is missing, please contact us before operating. No tools are required for assernbly.
- Plush toy*2
- Pillow’t
- Mosquito net with canopy*1
- Seat cover| 5) Remote controller
- Adaptor”l, 2 meters of USB cable”
- Seat frame”l
- Base bracket”T
---|---
Installation
For Base Bracket
Assembling: Put the frame in the base with “ ” shape components aligned.
Disassembling: Pull out of the sheet metal and pull up the seat frame.
For Pillow and Seat Cover
Installation: Put the seat cover on the seat frame and fasten the snap
button on the back. Attach the pillow to the top retaining ring of the seat
frame and press the Velcro of the pillow.
Removing: Pull off the Velcro to detach the pillow and unfasten the snap
button to remove the seat cover.
For Canopy With Toys
Installation: Attach the toys on canopy and fasten the clasps to the pipe
of the seat frame, and attach mosquito net to the bottom of the seat frame.
Dismantling: Put out of the clasps to remove the canopy.
Safety Belt Instruction
Place the baby into the swing and let his legs across both sides of the
crotch support restraint, then turn the crotch support cover up. Adjust the
seat belt on both sides and buckle up.
Note: Be sure to use the safety belt correctly when your baby lie on the
baby swing for the safety of your child. Buckle off when you take your baby
out of swing.
Assemble Instructions
- Press the steel clips, insert the upper seat frame into the hole of the down frame, ensure the clips bounce up,a clear “click* will be heard when correctly inserted.
- Insert left and right tube into main engine,ensure that the foot tube is aligned with the screw hole of the main engine in the bottom.
- Fix 4 screws into the foot tube.
Warning:
Guardian should take good care of your child, prohibit to play accessories and
avoid to get hurt or swallow !
User Instruction
Button Description
Power button: Plug in and the indicator light is on.
Press the button to turn the swing off.
Touch the button to play the built-in music. Touch it again to turn the sound
off.
- Turn on the bluetooth on smart phone and connect with “BT_BABYOO06”. The swing beeps, and then bluetooth is now connected well. Then the music from phone plays.
- Music priority. Bluetooth>Built-in music
Touch the button to make swing settings. There are five swing gears indicated by the lights.
Touch the button to set the time, The first touch will have the swing chair swing for8 minutes, the second touch will have it swing for 15 minutes, and the third will have it swing for 30 minutes,
Touch the button to play the next song.
Touch the button to increase the volume gradually.
Touch the button to decrease the volume gradually.
Motion Lock
Push the motion lock down to lock the seat frame and stop movement.
Pull the motion lock up to unlock the seat frame and the baby swing will swing
again.
Remote Control
Power Supply
- DC plug can be inserted into 100-240V ~ 50 / 6GOHz AC power supply.
- Adapter output parameters: voltage is SV and current is 1A.
WARNING
- The power terminals must not be short-circuited.
- Do not use adapters other than those supplied with this product to power the product.
- Keep children away from working adapter,
- Check the adapter cable connection regularly.
WARNING
- Donotuse this product once your child can sit up unaided or weighs more than Skg.
- Donotmove or lift this product with the baby inside it.
- Never use this product on an elevated surface(e.g.a table},
- Toavoid injury ensure that children are kept away when unfolding and folding this produc.
- Donot let children play with this product.
- Transformers used with the infant swing are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event cf such damage, they shall not be used.
- The infant swing shall only be sued with the recommended transformer.
- FALL and STRANGULATION HAZARDS: Infants have suffered head injuries Falling from swings and have strangled in straps
- ALWAYS use restraints. Adjust to fit saugly.
- STOP using product when infant attempis to climb out(approximately 6 months)
- Staynear and watch baby during use. This productis not safe for sleep or unsupervised use, if baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interferance, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate tadio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications However,
there is no guarantee that interference will not occurina particular
installation If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. The base bracket should
be installed and operated with minimum distance 20cm between the radiator and
your body.
Clean & Maintenance
Clean
-
Clean the base bracket and seat frame with wet cloth and a mild detergent.
Dry thoroughly then. Please do not use corrosive cleaner. -
Removable and washable fabric
• Seat fabric: Clean it with wet cloth and a mild detergent, and dry it.
• Canopy: Take it off and put a little cleaner, wash it gently by hands. Rinse it with clean water, and then hang it to dry, avoiding exposure to the sun.
• Pillow: Tear the Velcro off and take the pillow off. Put a little cleaner, wash it gently by hands, and then rinse it with clean water. Hang it avoiding sun exposure.
Maintenance
- Please check this baby swing regularly. Make sure of each part is well connected and well installed. Stop using for poor connection and connect/ install it again if necessary.
- This product contains electronic components, which shall not be used in water or in a humid environment. Please ensure the product is dry, and store it in a cool and dry place, avoiding direct sunshine for a long time.
Troubleshooting
Fast self-inspection solution below
No. | Trouble | Solution |
---|---|---|
1 | Not energized | 1. Check whether the adapter and DC cable are firmly |
connected. If loose, connect them firmly.
2. DC cable may be damaged. Please contact customer service to replace DC
cable.
2| The power lamp keeps flashing| Use matchable adapter with an output voltage
of 5V and lA
3| Motion lock stuck| Check the motion lock Pull it up to unlockthe seat
frame.
4| Overstring/Strike| Power off and restart it again
Note: For other trouble, please contact our customer service for help.
Never disassemble and repair the swing by yourself.
After-sales Service
Thank you for purchasing our products. If there is any quality problem, please
contact with the distributor.
Note:
- From the purchase date, normal users can enjoy one year’s free maintenance service for the circuit board components and one year’s free maintenance service for the whole machine.
- Other consumables and accessories are not covered by the warranty.
Non-warranty Coverage:
- Improper use
- Damage caused by natural disasters and other irresistible forces
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>