344202 Bticino Intercom Handset Instruction Manual
- June 15, 2024
- bticino
Table of Contents
344202 Bticino Intercom Handset
Product Information: Bticino Intercom Handset
Specifications:
- Manufacturer: BTicino SPA
- Model: Intercom Handset
- Color: Black
- Dimensions: 5.5 x 2.5 x 1 inches
- Weight: 0.2 pounds
Product Usage Instructions:
1. Installation:
To install the Bticino Intercom Handset, follow these steps:
-
Choose a suitable location near the main entrance of your
property. -
Mount the handset on the wall using the provided screws and
wall anchors. -
Connect the handset to the intercom system using the included
cables. -
Ensure proper wiring and connections for audio and power.
2. Basic Operation:
Once the Bticino Intercom Handset is installed, you can use it
to communicate with visitors at your door. Follow these steps:
-
When a visitor presses the doorbell, the handset will ring and
display the caller’s information on the screen. -
To answer the call, simply lift the handset from its
cradle. -
Talk to the visitor by speaking into the microphone located
near the speaker. -
To end the conversation, hang up the handset by placing it back
on its cradle.
3. Advanced Features:
The Bticino Intercom Handset also offers additional features for
enhanced convenience and security:
-
Adjustable volume control: Use the dedicated buttons on the
handset to adjust the volume of the incoming audio. -
Door unlocking: If your intercom system is equipped with a door
unlocking mechanism, you can remotely unlock the door from the
handset. -
Intercom system integration: The handset can be integrated with
other Bticino intercom devices, allowing for multi-room
communication.
Frequently Asked Questions (FAQ):
Q1: My Bticino Intercom Handset is not working. What should I
do?
A1: If your handset is not working, please try the following
troubleshooting steps:
-
Check if the handset is properly connected to the intercom
system. -
Make sure the power supply to the intercom system is
functioning correctly. -
If the issue persists, consult the troubleshooting section of
the user manual or contact BTicino customer support for further
assistance.
Q2: How do I use the Bticino Intercom Handset?
A2: To use the Bticino Intercom Handset, follow these steps:
-
When a visitor rings the doorbell, lift the handset to answer
the call. -
Speak into the microphone to communicate with the visitor.
-
To end the conversation, hang up the handset by placing it back
on its cradle.
Bticino intercom handset manual
Bticino intercom not working. Bticino intercom how to use.
For any further information about the cookies policy it is possible to read
the whole document.Per maggiori informazioni sulla privacy policy e
sull’informativa cookie Read the document. Based on the privacy, BTicino SPA,
with headquarters in Varese Viale Borri 231, informs all users that this
website don’t use cookies for profiling and sending advertising messages based
on the navigation history.
Technical Data Sheet DWG drawing BTicino S.p.A. products are in compliance
with the standard published by the International Electrotechnical Commission
(IEC). 2) Some older systems will have cable with one coloured core and a
solid white core in this case mark each core with a marker or tape. The
compliance can be proved by Certificates issued by organizations recognized by
IEC according to the CB-scheme. 3) Some systems may have loop on wiring, you
will have 2 cables into your handset (make sure any joins remain, as these may
be serving other flats on the system). User Manual: 344202 Open the PDF
directly: View PDF .Page Count: 6 40073 Bticino 344202 (2 Wire) Terminals 3
Bus Input 4 Bus Input IMPORTANT NOTE : 1) Before replacing the handset make
note of the wires to each terminal on the existing unit (an easy way is to cut
each core off leaving a piece of the insulation in place with colour visible)
twist unused cores together (so you know they are not used, do not short them
out). Our items comply with relevant European Product- Standards and show,
whether provided, CE marking, they have been constructed in accordance with
good engineering practice in safety matters in force in the Community, they do
not endanger the safety of persons, domestic animals or property when properly
installed and maintained and used in applications for which they were made. ©
2010 www.intercomsrus.com Configuration Wiring Diagrams Skip to main content
Brand BTicino Dimensions 194 x 78 x 54.5mm Height 194mm Width 78mm Depth
54.5mm Plant type SCS-BUS Series Sprint L2 Colour White / Bianco We, BTicino
S.p.A Viale Borri 231 21100 Varese (Italy), declare that all items listed in
BTicino catalogues, have been manufactured in compliance with the principal
elements of safety objectives of European Directive said LVD: 2014/35/EU: 26
February 2014 and, where requested, also in compliance with essential
protection requirements of electromagnetic compatibility according to European
Directive 2014/30/EU: 26 February 2014, and/or where requested also in
compliance with 1995/5/CE: 9 March 1999 “R&TTE” or where requested also in
compliance with 2014/53/EU: 16 April 2014 “RED”.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>