HYSEN HY09RF WI-FI Wireless Thermostat User Manual

HYSEN HY09RF WI-FI Wireless Thermostat

RF WIFI Wireless Thermostat

RF WIFI Wireless Thermostat User Manual

• Download the “Smart RM” or “Smart Life” app from Google Play and the App Store.

Choose one WIFI matching method of the following 2:

• WIFI matching on the thermostat: connect to voltage and turn on the thermostat, long press for 3-5 seconds, when “OFF” and “ ” are flashing at the same time, short press i: to match WIFI when WiFi and cloud icon are blinking together
• WIFI matching on receiver: connect to voltage and turn on the receiver, long press the receiver “push” button to match WIFI, when flashes quickly blue light is in EZ matching mode; when flashing slowly blue light is in AP matching mode.
• IP matched before delivery, please confirm thermostat and receiver are connected well and are working before matching WIFI. The blue light on the receiver is a signal indicator, it blinks when receiving a wifi charging signal.

Technical Data

Power:

• Receiver: 230Vac 50/60HZ Thermostat: USB power supply/4*AAA Batteries

Pls, remove the batteries when the USB power is working.

• Display accuracy: 0.5°C
• Insulating condition: Normal environment
• Probe sensor: NTC(10k)1%
• Running program: Set per 1 week as a cycle
• Contact capacity: 5A/250V(WW);16A/250V(WE)
• Output: Switch relay
• Working environment temperature: 0~70°C
• Installation: Wall mounted or on battery seat
• Range of temperature adjustment: 5~35°C
• Size (mm)： 1309025

Home Screen

• Program mode;run preset program
• Temporary manual mode
• Holiday mode, Holiday days and temperature can be set to run in countdown mode
• Heating,,icon disappears to stop heating
• WIFI connection, flashing EZ distribution mode
• Wifi status: Disconnection
• Manual mode
• Clock
• External NTC sensor
• Child lock
• : Low power
• Cloud icon: flashing AP distribution network mode
• RF communication icon: It is always on display when it is normal, and communication is abnormal when it is flashing

Quick Operation

Time Setting

• Power on state, press to set the minute. Second press to set hour. Third press to set week.
• Press to change the value. Press again to confirm.

Holiday Mode Setting

• Power on state, long press for 3-5 seconds press to set, short press choose holiday mode, then“OFF” will flash, press or change to “ON”, short switch holiday days and holiday temp, then press activate holiday mode.

Program Mode Setting

6 times period setting: 5+2 days(factory default),6+1 days, 7 days

Turn on the thermostat, and long press “ ” 3-5 seconds to do Program Mode Setting. Short press “ ” to switch and confirm. Press “ ” and “ ” to adjust the value. After finishing setting, stand for about 10 seconds, it will save the setting and then exit.

Advanced Option A

• Power off state, long press for 3-5 seconds to do advanced option A. Short press “ ” to switch and confirm.
• Press “ ” and “ ” to adjust the options. After finish setting, stand for about 5 seconds, it will save the setting and then exit.

Advanced Option B

Power off state, long press for 3-5 seconds to access advanced option B short press to choose the option, and adjust data by or , Rrmain about 5 seconds after finish setting will quit setting.

Considering battery usage, RF data updates every 20 minutes. If you wanna shorten the interval, pls use USB power and remove the batteries. Follow B05 and B06 operations.

• Return difference: The limit valve of the external sensor is 45℃ for factory default (A5), and the value of the external sensor control return difference (A3) is 2. When the temperature rises to 45℃, the relay stops working and will remind high-temperature production alarm. If the temperature declines to 43℃relay continuetoworkandheating alarm will be relieved. (it can be operated, only when the room temperature is lower than the setting temperature )
• Sensor fault display: please choose the correct working way of sensor type, if choose wrongly or sensor fault (breakdown), “E1” or “E2” will be displayed on the screen. The thermostat will stop heating until the fault is eliminated.

Description of thermostat data communication:

1. Communication every 20 minutes under normal working conditions
2. On/off will communicate with the receiver once time
3. When the output status is switched, it will communicate with the receiver once.
4. : It is always on when wireless communication is normal, and it flashes when wireless communication is abnormal.

Receiver Indicator Light

• Power indicator (green): Power on the receiver, green light always on; turn off the receiver, and the green light is on for 1 second and off for 1 second.
• RF signal indicator (orange): It is always on within 10 seconds after power-on (At this time, you can send the IP address of the thermostat to the receiver to complete the pairing: refer to the advanced option B3). After the pairing is successful, the signal light will be off; or if no pairing is performed within 10 seconds It will automatically turn off; when it is working normally, the light will flash when it receives a wireless signal.
• Load/fault indicator (red): In normal operation, the load output is turned on, the light is on, and the load output is off, and the light is off; when there is a fault, it blinks and the alarm is indicated as follows:

1. The thermostat and the receiver are not paired: flashes 2 times (quick flashes), and the interval is off for 2 seconds
2. Loss of wireless signal (no data communication in 1 hour): flashes 3 times (quick flashes), with an interval of 2 seconds off
3. External sensor alarm: flashes 4 times (quick flashes), with an interval of 2 seconds off(only valid when the sensor type is selected as N3 in the advanced options of the thermostat)

WIFI signal indicator (blue): When WIFI data is received, it will flash once; continuous fast flashing means it is in WIFI EZ network configuration mode; continuous slow flashing means it is in WIFI AP network configuration mode; it will always be when the network is successfully configured. On; when the WIFI is abnormal, it will flash twice quickly, and the interval will be off for 2 seconds.

Wiring Diagram

RISK OF ELECTRICAL SHOCK

• Please arrange a professional technician to install the product according to the drawings and instructions.
• Disconnect the power supply before making any connection.
• Contact with components carrying hazardous voltage can cause electrical shock.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>