better bathrooms ARIMB001 Mini Cloakroom Basin Mixer Tap User Manual
- June 12, 2024
- Better Bathrooms
Table of Contents
ARIMB001 Mini Cloakroom Basin Mixer Tap
User Manual
ARIMB001 Mini Cloakroom Basin Mixer Tap
Thank you for choosing Better Bathrooms.
Please read this manual before installing your product and keep for future
reference.
Product
Arissa Mini Cloakroom Basin Mixer Tap – ARIMB001, ARIBB001, ARICH001,
ARIMW009, ARIVRG001
Arissa Mono Basin Mixer Tap – ARIMB002, ARIBB002, ARICH002, ARIMW001,
ARIVRG002
Arissa Mono High Rise Basin Mixer Tap – ARIMB003, ARIBB003, ARICH003
- Single-person assembly
- Tools required
- We always recommend using professional tradespeople to install your product
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less.
From modern to traditional style ceramics, plus the gorgeous fixtures,
fittings and furniture to match. So, you can fall in love with your space
every single day.
As one of the UK’s largest independent bathroom stores, we’ve received
countless awards; including the National Business Awards UK, the Digital
Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However,
should any problems occur, please:
- log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
- contact us via betterbathrooms.com/content/contact-us
Important information
- Please read these instructions thoroughly and retain for future reference
- Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws.
- The system must be flushed prior to installation
- Minimum and Maximum working pressure : 1 – 5 bar
- Pressures must be equal for optimum performance
- Please do not connect hot and cold water supply lines in reverse. This could result in hot water flowing from cold line and cause scalding.
- The feed-water temperature of water shall not exceed 85°C. Exceeding 85°may cause scalding, the service life of faucets might be shortened, or the faucet might be damaged.
- After installation, please make sure the faucet is securely mounted and checked for leaks.
Parts / Diagrams
Round Mini Cloakroom Basin Mixer Tap
No | Description |
---|---|
1 | Handle assembled |
2 | Dome |
3 | Locknut |
4 | Cartridge |
5 | Body assembled |
6 | Aerator with housing |
7 | Rubber washer |
8 | Gasket |
9 | Leg |
10 | Locknut |
11 | Screw |
12 | Flexible hose |
Round Mono Basin Mixer Tap
No | Description |
---|---|
1 | Handle assembled |
2 | Dome with locknut |
3 | Cartridge |
4 | Body assembled |
5 | Aerator with housing |
6 | Rubber washer |
7 | Gasket |
8 | Leg |
9 | Locknut |
10 | Screw |
11 | Flexible hose |
Round Mono High Rise Basin Mixer Tap
No | Description |
---|---|
1 | Handle assembled |
2 | Dome with locknut |
3 | Cartridge |
4 | Body assembled |
5 | Aerator with housing |
6 | Rubber washer |
7 | Gasket |
8 | Leg |
9 | Locknut |
10 | Screw |
11 | Flexible hose |
Dimensions
Tools required
- Screwdriver
Installation
Remove the Screws, Locknut, Metal gasket, Rubber Washer from the mixer body.
The flexible hoses are pre-assembled with the body from the factory. Ensure
the o-ring is fitted between the base and basin/top.
From above basin, push the inlet hoses through the hole on basin and position
correctly.
Do not allow the hoses to be kinked or twisted From underneath basin, secure
mixer body by placing Rubber Washer, Metal gasket onto the leg, followed by
fixing Locknut and screws.
Tighten the Locknut and screws by screwdriver until mixer is secure, do not
overtighten as this could crack the ceramic Connect the hot and cold flexible
hoses to the isolation valves (not included), hot on the left, cold on the
right.
Turn on water supply and check for leaks.
Operation
By lifting the Lever Handle upwards, the valve will be activated. Water flow
will increase by continuing to lift up the Lever Handle. By rotating the Lever
Handle counter-clockwise, the water temperature will decrease.
By rotating the Lever Handle clockwise, the water temperature will increase.
Troubleshooting
Issues | Inspection Item |
---|---|
Mini Cloakroom Basin Mixer Tap | Mono Basin Mixer Tap |
Poor water flow | • Is the mixer cartridge(4) free from debris |
• Is there blockage within the filter mesh on aerator(6)
• Is the flexible hose(12) kinked or twisted
• Was the system flushed prior to installation| • Is the mixer cartridge(3)
free from debris
• Is there blockage within the filter mesh on aerator(5)
• Is the flexible hose(11) kinked or twisted
• Was the system flushed prior to installation
Water leak| • Is the locknut(3) on top of cartridge fully tightened
• Is there damage or dirt within the O-rings of the cartridge(4)
• Is there damage or dirt with the rubber washer or O-ring of
the aerator(6)
• Is the housing of aerator(6) fully tighten
• Is there damage with the rubber washer(7)
• Is there damage within the rubber washer inside the nuts
of flexible hoses(12)
• Is there damage with the O-rings on the flexible hoses(12)| • Is the
locknut(2) on top of cartridge fully tightened
• Is there damage or dirt within the O-rings of the cartridge(3)
• Is there damage or dirt with the rubber washer or O-ring of the
aerator(5)
• Is the housing of aerator(5) fully tighten
• Is there damage with the rubber washer(6)
• Is there damage within the rubber washer inside the nuts of flexible
hoses(11)
• Is there damage with the O-rings on the flexible hoses(11)
Handle loose| • Is the screw inside the handle (1) fully tightened| • Is the
screw inside the handle (1) fully tightened
Body loose| • Are the locknut(10) and screw(11) underneath fully
tightened| Are the locknut(9) and screw(10) underneath fully tightened
Maintenance
Replacement of Cartridge
|
---|---
Round Mini Cloakroom Basin Mixer Tap
A: Uninstall the lever by rotating anticlockwise.
Remove the screw by using allen key. Take out the handle.
B: Remove the Cap, locknut(by using wrench), cartridge from the body
accordingly to the graph.
Install a new cartridges’ in reverse steps.
|
---|---
Round Mono Basin Mixer Tap
A: Uninstall the lever by rotating anticlockwise. Remove the screw by
using allen key. Take out the handle.
B: Loose the Cap with locknut by using a plier to clamp the blocks inside
and rotate anti-clockwise, take out the cap and cartridge from the body
accordingly to the graph.
Install a new cartridges’ in reverse steps.
Replacement of Aerator
Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do not use any abrasive cleaning agents or materials. If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.
For more information
- visit betterbathrooms.com
- email customerservices@buyitdirect.co.uk
- call 03303903062
- write to Trident Business Park, Neptune Way, Huddersfield, HD21UA
Part of the BuyitDirect Group
Documents / Resources
|
better bathrooms ARIMB001 Mini Cloakroom Basin Mixer
Tap
[pdf] User Manual
ARIMB001, ARIBB001, ARICH001, ARIMW009, ARIVRG001, ARIMB001 Mini Cloakroom
Basin Mixer Tap, ARIMB001, Mini Cloakroom Basin Mixer Tap, Cloakroom Basin
Mixer Tap, Basin Mixer Tap, Mixer Tap, Tap
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>