PROLED L7A200S82 Down Light Arena 200 Instruction Manual

Table of Contents

Specifications

Characteristics

Safety Instructions

Be sure to have a qualified electrician complete installation.
The customer is not entitled to claim for any lights installed without observing European safety directives.
The manufacturer is then discharged from liability when damage is caused by improper use or installation.
If any luminaire is subsequently modified, the person responsible for the modification shall be considered as manufacturer.
Do not cover lamps with heat-insulating materials.
For indoor use only. Protection class IP44.

Installation Instructions

Switch off the electricity at the mains before commencing installation or lamp change and (if a fuse box is installed) remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
Connect the luminaire to the secondary side of a constant current driver that is suitable for the luminaire (350 mA, 500 mA, 700 mA, 1050 mA, or 1400 mA).
Connect the primary side of the driver to the power supply (230 VAC).
Ensure all connections are tight with no loose strands.
Make sure fire regulations are not breached when fitting your lights.
If you are in any doubt regarding these instructions, consult a qualified electrician.

Installation Sequence

First, connect the LED driver (driver not included).
Second, connect the LED driver (driver not included) with an INPUT of 220-240VAC.

Additional Information

Frequently Asked Questions (FAQ)

Q: Can this product be used outdoors?
A: No, this product is for indoor use only.
Q: What is the IP rating of this product?
A: The IP rating of this product is IP44.
Q: Can I modify the luminaire myself?
A: No, any modification to the luminaire should be done by a qualified person who will then be considered as the manufacturer.
Q: Is the LED driver included in the delivery?
A: No, the LED driver is not included in the delivery.

PROLED DOWNLIGHT ARENA 75 / 100 / 150 / 200 L7Axxxxx

Characteristics

CITIZEN LED Warm White or Neutral White
Power consumption 11 W (Arena 75), 13 W (Arena 100), 18 / 25 W (Arena 150) or 25 / 38 / 53 W (Arena 200)
Aluminium housing round or square
Ring colour White, Secondary reflector silver, white or black
Beam angle 20°, 25°, 30°, 50°, 55°, 60° or 70° (depending on luminaire)
Driver 350mA (Arena 75/100), 500 mA and 700 mA (Arena 150) as well as 700mA, 1050 mA and 1400 mA (Arena 200) constant current (driver not included)
Dimmable with special 350 mA (Arena 75/100), 500 mA or 700 mA (Arena 150) as well as 700mA, 1050 mA and 1400 mA (Arena 200) constant current dimmer or constant current driver
Operating temperature range -10° C till +45° C (Arena 200 at 1400 mA only max. 35°C)
CE compliant with applicable European directives

Warning

For indoor use only
Please ensure that the packaging is disposed of in a safe environment
If cable is defected, do not use the luminaire
We do recommend that a qualified electrician should be used to install the products
Do not look at the lighted lamp directly

Safety indices

Be sure to have a qualified electrician complete installation. The customer is not entitled to claim for any lights installed without observing European safety directives. The manufacturer is then discharged from liability when damage is caused by improper use or installation. If any luminaire is subsequently modified, the person responsible for the modification shall be considered as manufacturer. Do not cover lamps with heat-insulating materials. For indoor use only. Protection class IP44.

Please follow the sequence of installation step by step. Non-observance can lead to damage of LED.

Switch off the electricity at the mains before commencing installation or lamp change and (if a fuse box is installed) remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
Connect to secondary side of a constant current driver, which is suitable to luminaire (350 mA, 500 mA, 700 mA, 1050 mA or 1400 mA)
Connect primary side of driver to power supply (230 VAC)
Make sure all connections are tight with no loose strands
Ensure fire regulations are not breached when fitting your lights
If you are in any doubt regarding these instructions, consult a qualified electrician

Please follow the sequence, if not destroying of LED

Energy efficiency class of the light source

Products listed in this manual contain a light source of following efficiency class, listed according to the item codes

ATTENTION

This product counts as „containing product“ according to directive (EU) 2019/2020 and (EU) 2019/2015.
The light source is part of the containing product. A separation of the light source and the containing product using commonly available tools is possible with this product.
Replacement of the light source using commonly available tools is possible with this product.
The light source can be separated for testing purposes.
Installation and commissioning may only be performed by qualified persons.
National installation regulations must be observed.
Luminaires must be disconnected from mains before any work.
10.22 Technical amendments reserved
- MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg
- Germany www.proled.com