Kinderkraft PRIME2 Stroller User Manual

Kinderkraft PRIME2 Stroller

The illustrations are for illustration only and do not represent the product.

Dear Customers,

Thank you for purchasing a Kinderkraft product. Our products have been designed for your child’s safety and comfort. The buggy is an ideal solution for those who value quality, modernity and functionality. Please read the manual carefully and follow its recommendations.

IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

Safety and care notes

WARNING!

• Never leave the child unattended.
• Ensure that all the locking devices are engaged before use.
• To avoid injury ensure that the child is kept away when unfolding and folding this product.
• Do not let the child play with this product.
• Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
• This product is not suitable for running or skating.
• The product is intended for children from 0 months old to 22 kg or 4 years whichever come first.
• The product is designed to transport one child at a time.
• The maximum basket load is 3 kg.
• Any load attached to the handle and/or on the back of the backrest and/or on the sides of the vehicle will affect the stability of the vehicle.
• Maximum weight of a bag attached to the adjustable handle is 2 kg.
• Maximum load in the trinket pocket 0.5 kg.
• Lift the front suspension when going up a curb or step.
• The brakes should be locked when the child is placed in or taken out of the buggy.
• Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
• Do not place the product near open flame or other heat sources.
• Do not use with an additional platform.

The following applies to the pram body:

• This product is suitable for a child who cannot sit up unaided, roll over and cannot push itself up on its hands and knees. Maximum child weight – up to 9 kg.
  WARNING!

• This product is only suitable for a child who cannot sit up unaided.

• Only use on a firm, horizontal level and dry surface.

• Do not let other children play unattended near the carry cot.

• Do not use if any part of the carry cot is broken, torn or missing.

• The handles and the bottom of the carrycot should be checked regularly for signs of damage and wear.

• Make sure the handle is in the correct position of use before carrying or lifting.

• The head of the child in the carry cot should never be lower than the body of the child.

• Do not insert an extra mattress apart from that supplied with the product.

• Before moving or lifting, adjust the base of the carrycot to the lowest position.

The following applies to the pushchair:

WARNING!

• This seat unit is not suitable for children under 6 months
• Always use the restraint system.
• The product is intended for children from 6 months old to 22 kg or 4 years whichever come first.

Applies to the car seat:

The Kinderkraft PRIME buggy can be offered in a set with a compatible car seat.

• The product is intended for children from birth to 13 kg.
• If the car seat is used together with the buggy, it does not replace a cradle or crib.
• For sleep, place the child in the pram body, cradle or crib.
• Use only parts and accessories supplied or recommended by the manufacturer.

INSTRUCTIONS FOR USE

PUSHCHAIR FRAME ELEMENTS (PIC. 1)

1. Handle

2. Handle adjustment button

3. a) Release button
   b) Folding lever

4. Frame port
   a) Car seat adapters

5. Blocking element after folding the frame

6. Brake

7. Rear wheels

8. Front-wheel releasing button

9. Front wheels

10. Swivel wheels lock

11. Rear wheel release button
    
    STROLLER SEAT ELEMENTS (PIC. 2)

12. Backrest adjustment lever

13. Button to detach the stroller shade

14. Button to detach the bar

15. Lever releasing the seat from the frame

16. Seat connector to the pushchair frame

17. Footrest adjustment button

18. Bar

19. Leg warmer

20. Universal rain cover
    
    CARRYCOT ELEMENTS (PIC. 3)

21. Carrycot carry handle

22. Carrycot hood

23. Carrycot folding/unfolding button

24. Lever releasing the carrycot from the frame

25. Carrycot connector to the pushchair frame

26. Backrest adjustment lever

27. Mattress

28. Leg warmer

29. Carrycot lining

30. Universal rain cover

31. Bag

32. Changing mat

33. Bag hangers
    

UNFOLDING THE PUSHCHAIR FRAME

Release the locking element( PIC.4). Hold the frame and lift the handle (PIC.5) until hearing the characteristic locking sound (PIC. 6).

ASSEMBLY AND DISASSEMBLY OF FRONT WHEELS

Insert wheels into the slots on the front of the frame until hearing a locking sound (PIC. 7). To remove the wheels, press the release button (PIC. 8). The wheels can be locked to ride straight by pressing the lock button ( PIC.9 I). P I C. 9.II shows the deactivation of the lock.

ASSEMBLY AND DISASSEMBLY OF REAR WHEELS

Slide in the wheel’s pin into appropriate frame slots till they click (PIC. 10). To release the wheel, press the button (PIC.11.I) and remove the wheel ( PIC. 11.II).

NOTE! Before using the buggy make sure that all the wheels are properly installed.

BRAKE

Activate the brake ( PIC. 12.I). Lift the brake to deactivate the lock (PIC.12.II).

ASSEMBLY AND DISASSEMBLY OF THE SEAT

Clip the seat connector (16) into the frame port (4) until hearing a characteristic click ( PIC. 13.I). The seat can be fitted front or rear- facing to the direction of travel ( PIC.13). Press the lever realising the seat (15) of the frame (4) on both sides and pull upwards (PIC.13.II) to disassemble the seat.

ASSEMBLY AND DISASSEMBLY OF THE HOOD

Insert the hood into the guides (PIC.14 I). Secure with the hoop & loop fasteners on the sides (PIC.14.II) and zip u pat the back of the seat (PIC.14.III). To disassemble, follow the steps in reverse order (PIC.14.IV, 14.V,14.VI).

CAUTION! Assemble the hood before using the pushchair.

ASSEMBLY AND DISASSEMBLY OF THE BUMPER BAR

Insert the bar into the appropriate frame slots (PIC.15.I). To remove the bar, press the buttons on both sides of the frame and slide out the bar (PIC.15.II).

SAFETY HARNESS ADJUSTMENT

Adjust the height of belts each time (PIC.16.I & 16.II). Press the button to unbuckle the harness (PIC.17). To fasten, connect the side belts together (PIC. 18.I) and then clip them into the buckle (PIC. 18.II).

BACKREST ADJUSTMENT

Adjust the backrest by the lever (PIC.19.I & 19.II) in one of 4 positions.

HANDLE ADJUSTMENT

Press the handle adjustment button (2 ) and set it in a convenient position (PIC.20).

BAG ASSEMBLY

Hang the bag (31) on the handle using the hangers (33) (PIC.21). The set also includes a changing mat (32).

FOOTREST ADJUSTMENT

To change the position upwards, lift up the footrest ( PIC.22.I). To adjust it downwards, press the side buttons and lower it (PIC.22.II & 22.III).

SHOCK ABSORPTION ADJUSTMENT

Turn the knobs according to the picture (PIC.23.I) during rides on uneven surfaces. Increase the stability on flat surfaces by turning the knobs upwards until they lock ( PIC.23.II).

LEG WARMER AND RAIN COVER ASSEMBLY

Secure the cover with snaps on both sides of the hood (PIC. 24)
Put the rain cover on the seat (20) or carrycot(30).

DISASSEMBLY OF THE STROLLER

Set the seat front-facing ( PIC.25.I). Leave the backrest in the lowest position. Press the brake (PIC. 25.II). Fold the shade. To fold, press the unlocking button (3a) and pull both folding levers (3b) towards yourself ( PIC. 25.III). After the complete folding of the stroller, the blocking element should lock by itself (PIC.25.IV). Lower the footrest to minimise the dimensions ( PIC. 26.V).

CAUTION! Do not fold the pushchair frame once the car seat, carrycot or seat are fitted rear-facing.

PUSHCHAIR CARRYCOT

Set carrycot hood (PIC. 26.I). To fold the hood, press the buttons on both sides of the frame (PIC.26.II). The carrycot has an attached lining ( 27), which can be detached by unzipping the zipper around it (PIC.27.I), and the mattress (29), which should be placed inside the carrycot (PIC.27.II).
Attach the leg warmer with zipping and secure it on the sides by button and loop (PIC.28.I) and pin the additional button (PIC.28.II) if you want to use the additional hood panel.

NOTE! The pram body can only be mounted facing backwards the child faces the person pushing the buggy).

CARRYCOT BACKREST ADJUSTMENT

Push the lever ( PIC.30) located under the carrycot and lock it in a convenient position.

ASSEMBLY AND DISASSEMBLY OF THE CARRYCOT ON THE FRAME

Clip in the carrycot connector (25) into the frame port (4) (PIC.30.I ) until characteristic click. Release the lever to disassemble the carrycot and pull it upwards (PIC. 30.II).

CAR SEAT ASSEMBLY ON THE FRAME

The attached adapters are compatible with car seats: Kinderkraft®, Kiddy®, Maxi Cosi®, Cybex®, BeSafe®, Nuna® and they fit, among others, for models: Kinderkraft Mink, Kiddy Evoluna i-Size 2, Kiddy Evolution Pro 2, Cybex Aton 5, Cybex Aton M, Cybex Aton M i-Size, Cybex Aton B2, Cybex Aton S2 i-Size, Cybex Cloud Z i-Size, Maxi Cosi Cabriofix i-Size, Maxi Cosi Pebble Pro, Maxi Cosi 360, Maxi Cosi Rock, Maxi Cosi Tinca, Maxi Cosi Citi, BeSafe izi Go Modular x1, Britax Romer BabySafe 3, Avionaut Pixel, Nuna Pipa next i-Size, Nuna Pipa lite, Nuna Pipa lite lx, Kinderkraft I-Lite. Place the adapters on the frame (PIC. 31.I) and insert the car seat on mounted adapters (PIC. 31.II). Removing the adapters is shown on PIC. 32.

NOTE! The car seat must always be fitted in such a way that the child should face the carer.

CARE AND MAINTENANCE

The buyer is responsible for proper installation of all functional elements as well as for carrying out all required maintenance and adjustments in order to keep the buggy in good technical condition.
The buggy must be periodically checked for potential problems. Significant measures to be applied to ensure the child’s safety and prevent shortening of the product life have been presented below:

• Check the strength and safety of all rivets and connections.
• Check all wheel locking equipment and tyres. If necessary, replace or repair.
• Check if all safety devices work properly, particularly the main and additional fasteners that should move freely at any time.

Please, stop using the buggy if there are doubts as to its proper use or a suspicion of any danger.
If the wheels squeak, apply a thin layer of silicone. Do not use oil or grease based products as they attract dirt, which makes buggy movement difficult.

CLEANING

If the elements of the buggy chassis have been exposed to saltwater, rinse with tap water as soon as possible. Do not fold or store the product when it is wet and never store it in wet conditions, as it can lead to mould growth.

Mummy bag: hand wash; do not: bleach, tumble dry, iron, dry-clean.
Basket, carrycot canopy, seat canopy, seat sheathing, mattress: do not wash. The product can be cleaned gently with a moist cloth and mild detergent; do not: bleach, tumble dry, iron or dry-clean.
mat, leg cover, mattress cover, carrycot lining: maximum wash temp. 30°C; do not: bleach, tumble dry, iron, dry-clean.

| Do not wash. Clean the product gently with a damp cloth and a mild detergent.
---|---
| Wash at max. 30°C, gentle process.
| Do not bleach.
| Do not iron.
| Hand wash at max. 40˚.
| Do not dry in a tumble dryer.
| Do not dry clean.

WARRANTY

1. All Kinderkraft products are covered by a 24-month warranty. The warranty period starts from the date the product is handed over to the Buyer.

2. The warranty is only valid in the member states of the European Union, excluding overseas territories and the territory of the United Kingdom of Great Britain and Northern Ireland excluding the British Overseas Territories.

3. The manufacturer’s warranty does not apply to countries not listed above. The conditions of the additional warranty may be determined by the Seller.

4. In some countries, it is possible to extend the warranty to a limited period of 120 months (10 years).The complete terms and conditions and the warranty extension registration form are available at WWW.KINDERKRAFT.COM

5. Claims must be made by completing the form available at WWW.RMA.KINDERKRAFT.COM

6. The warranty does not cover:
   A. Cosmetic damage, including but not limited to: scratches, dents and cracks in plastic, unless the failure is due to a material or manufacturing defect;
   B. Damage resulting from misuse or poor maintenance – including but not limited to: mechanical damage to products caused by misuse or poor maintenance. Refer to the instructions for use and installation of the product contained in the user manual;
   C. Damage caused by improper assembly, installation or disassembly of products and/or accessories. Refer to the instructions for use and installation of the product contained in the user manual;
   D. Damage caused by corrosion, mould or rust, resulting from improper maintenance, care and storage;
   E. Damage caused by normal wear and tear or otherwise resulting from the normal passage of time. This includes: tears or punctures in inner tubes; tyre damage; tyre tread damage; fading of fabrics resulting from mechanical use (e.g. on joints and covering of moving parts);
   F. Damage or erosion caused by sun, perspiration, detergents, storage conditions or frequent washing, etc;
   G. Damage caused by accident, abuse, misuse, fire, contact with liquid, earthquake or other external causes;
   H. Products that have been modified to change functionality without 4Kraft’s written consent;
   I. Products from which the serial number or lot number has been removed or tampered with in any way;
   J. Damage caused by the use of third party components or products – including but not limited to: cup holders, umbrellas, reflectors, bells;
   K. Damage caused by transport or by ground handling service providers.

7. The warranty period for accessories included with the product is 6 months from the date of sale, excluding the faults described above.

8. These warranty conditions are complementary to the Customer’s statutory rights with respect to 4KRAFT sp. z o.o. The warranty does not exclude, limit or suspend the Customer’s rights under warranty for defects in goods sold.

9. The full text of the Terms and Conditions of the Warranty is available on the website WWW.KINDERKRAFT.COM

Customer Support

In the interests of our Clients – we are at your disposal! If you have a problem with the product you received, contact us in the most convenient way for you!

International: support@kinderkraft.com (0048) 61 646 02 37

Kinderkraft.com

/Kinderkraftofficial

Kinderkraft

@Kinderkraftofficial

References

• RMA
• RMA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>