Qilive Q.1803 True Wireless Earphones User Manual
- June 15, 2024
- Qilive
Table of Contents
**Qilive Q.1803 True Wireless Earphones User Manual
**
SAFETY INSTRUCTIONS
Before using this product, carefully read these instructions and keep the user manual for future reference.
-
High sound pressure. Hearing damage risk. Do not listen at high volume levels for long periods.
-
WARNING: KEEP OUT OF REACH OF CHILDREN. Small parts may cause choking if ingested. This product is not a toy – never allow children to play with the device. Always store the product out of reach from children and pets.
-
No naked flame sources, such as lighted candles, should be placed on the device. Do not place in direct sunlight or in the near of heat sources (e.g. heaters, stoves, water heater, etc.).
-
The device shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on it. Keep away from water and high humidity along with high temperatures, direct sunlight, dusty smoky, and steamy places.
-
This device should be used in temperate climates only.
-
Never wear the earbuds while showering or bathing, or when participating in water sports (e.g., swimming, surfing).
-
Stop using the device immediately in case of an abnormality or failure.
-
Use of earbuds will impair your ability to hear other sounds.
Use caution while using your earbuds when you are engaging in any activity that requires your full attention.
Using the earbuds while operating a motor vehicle, motorcycle or bicycle may be dangerous. Surrounding sounds may not be heard clearly, which may cause traffic accidents or injuries. -
Do not use the device in places where surrounding sounds cannot be heard, such as roadways, station platforms, railroad crossing, or construction sites.
-
When using the product while walking, turn down the volume until surrounding sounds can be also heard clearly.
-
This product contains magnetic material. If you have a pacemaker or other electrical medical devices, consult your physician before using this product.
-
Avoid dropping. Dropping or hitting the device may damage it.
-
Do not use the earbuds without installed ear tips.
-
The earbuds are only to be charged with the charging case provided.
-
Do not tamper with the product. Never attempt to service, dismantle the product yourself, or push objects of any kind into the products, as this may result in fire, electric shock, or equipment damage and will also invalidate the warranty.
-
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion.
-
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas; and a battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
-
Never handle the earbuds and their charging case with damp or wet hands.
-
Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
-
Do not continue charging the battery if it does not reach full charge within the specific charging time. Overcharging may cause the battery to become hot, rupture, or ignite.
-
Observe the following temperature limits for this product:
- Normal operation: 0 to 35°C
- Storage/Transportation: 0 to 45°C
-
Both earbuds and charging case contain a built-in battery.
Always remove the battery from the product before disposal. The battery must be disposed of safely. To remove the batteries, take them to a designated disposal/ collection site. -
WARNING: Do not ingest the earbuds! Chemical burn hazard. This product contains batteries. If the earbud with its battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. If you think earbuds might have been swallowed or placed inside any part of the body, seek immediate medical attention.
-
Batteries must not be disposed of with normal household waste. Recycle them at the collection points provided for this purpose. Contact the local authorities or your dealer for recycling advice. Correct disposal of old batteries helps protect the environment and human health.
-
The marking of this device (symbol of a crossed-out dustbin) complies with European Directive 2012/19/ EU relating to “used electrical and electronic equipment”. This marking means that this equipment, at the end of its useful life, cannot be disposed of with other household waste. The user is required to deliver it to operators who collect used electrical and electronic equipment. Collection operators, including local collection points, shops and local authorities, create an appropriate system for collecting equipment. Appropriate collection of used electrical and electronic equipment helps avoid harmful impacts on human health and the environment, resulting from the presence of hazardous components, as well as from improper storage and treatment of this equipment.
TECHNICAL SPECIFICATIONS
| Bluetooth version | 5.3 |
|---|---|
| Frequency range | 2402 – 2480 MHz |
| Max. transmission power | 6 dBm |
| Sensitivity | 105 ± 3 dB |
| Impedance | 32 Ω ± 15% |
| Input | DC 5V / 500 mA |
| Earbuds battery capacity | 30 mAh x 2 |
| Charging case battery capacity | 320 mAh |
| Charge time | 1.5 hours |
PRODUCT DESCRIPTION
- Microphone
- Charging port of earbud
- Microphone
- LED of earbud
- Multi-function touch button (MFB)
- Battery level LEDs of charging case
- Charging port of charging case
USE
CHARGING THE EARBUDS
Note: Fully charge the battery for 2 hours before using the earbuds for
the first time, or when they have been unused for extended periods.
Put the earbuds into the charging case, and they will charge automatically.
The LEDs of earbuds will light up. The LEDs of charging case will light up for
4 seconds and then turn off.
When the earbuds are fully charged, the LEDs of earbuds will be off.
CHARGING THE CHARGING CASE
When the charging case is connected to a charger (not included) or a USB port
of a computer by the included charging cable, its LEDs will keep flashing.
When the charging case is fully charged, its LEDs will be steadily on.
Note: When the charging case is out of battery, the earbuds will not turn
on/off automatically when removed from or placed back into the charging case.
In this case, turn the earbuds on/ off manually.
FIRST USE & PAIRING
Auto Power-On & Pairing
Take the earbuds out of the charging case. The earbuds will automatically
power on and enter pairing mode.
Manual Power-On & Pairing
Touch the area indicated for 2 seconds on both earbuds to turn on the earbuds.
(You will hear the prompt tone).
The earbuds will automatically enter pairing mode.
CONNECT
Pairing Mode
When earbuds are turned on, they will enter pairing mode automatically. One
earbud’s LED will keep flashing in white and green. The other earbud‘s LED
will flash briefly, and then turn off when the two earbuds are connected to
each other.
Connect
Turn on the device’s Bluetooth setting. Search for and choose Q.1803 to pair
and connect. Your device will show “Connected”.
Note: The earbuds will automatically reconnect to the last connected device when the following are all true.
- The two devices are on.
- The two devices are within range of each other.
- The last connected device’s Bluetooth is on.
POWER-OFF
Auto Power-Off
Put the earbuds back into the charging case. The earbuds will automatically
power off.
Manual Power-Off
- Touch the area indicated for 10 secs on both earbuds to power off the earbuds.
- The earbuds will automatically turn off when they remain unpaired for 5 mins.
WEARING
Insert the earbuds directed towards your ear canal.
Twist gently until the earbuds fit comfortably and get better sound
experience.
CONTROL
RESET
- If you have trouble connecting the earbuds to your device, follow the steps below to reset the earbuds:
- Turn off Bluetooth on your device and clear all its pairing records.
- Take the earbuds out of the case and tap either earbud 5 times quickly. You’ll hear a prompt sound and both earbuds’ LEDs will flash quickly 6 times.
- Follow the instructions in “4.4. Connect” to connect the earbuds.
MAINTENANCE AND CLEANING
Do not use any abrasive cleaners, chemicals, glass cleaners, universal cleaners or oil-based maintenance agents!
CLEANING THE EARBUDS
If the volume is lower than it should be with the current setting, clean the earbuds.
- Remove any earwax or debris from the earbuds with a soft brush, cotton swabs, or a soft and dry cloth.
Note: Do not use excessive force while removing earwax or debris. The earbuds may be damaged.
CLEANING THE CHARGING CONTACTS
If the batteries do not charge properly, wipe gold-coloured contacts on both earbuds with a dry, soft cloth.
CLEANING THE CHARGING CASE
When the charging case and earbuds are exposed to foreign materials, such as
dust, sand, or metal shavings, the device may not charge properly or may be
damaged.
In this case, wipe them with a soft and dry cloth before inserting earbuds
into the charging case.
GUARANTEE
General terms & conditions
The Qilive guarantee is a commercial guarantee offered by SAS OIA, registered to 200 rue de la recherche, 59650 Villeneuve d’Ascq, for Qilive brand products, within its capacity as manufacturer.
The Qilive guarantee is applied without prejudice to your rights to benefit, freely, from the legal compliance guarantee applicable in the country of marketing. For further information on the legal compliance guarantee, please refer to your retailer’s T&Cs of Sale (General Terms and Conditions of Sale).
What is covered by the Qilive guarantee?
A Qilive guarantee covers the repair or replacement with equivalent features
of your Qilive appliance if it is found to be defective due to a material
fault or a manufacturing fault during the guarantee period.
Repaired or replaced products may include new and/or repackaged hardware and
components.
If the product cannot be repaired or replaced, Qilive will refund the purchase price indicated on the proof of purchase.
What isn’t covered by the Qilive guarantee?
Qilive appliances are designed and manufactured to continuously offer high performances in normal domestic environments. If a Qilive appliance is used in line with the intended usage and it breaks down during the guarantee period, we are liable to repair or replace it.
Nevertheless, in some circumstances the Qilive guarantee does not cover the repair or replacement of an appliance. These circumstances are clearly indicated. The following cases are not covered:
- Normal wear, including aesthetics (e.g. scratches, dents or vandalism) and parts which may wear over time (e.g. fuse, belt, tyre, brake, filters, etc.)
- Damage or issues caused by incorrect use or use which doesn’t comply with the serial plate or the user manual, or by an accident or alteration.
- Damage caused by failure to comply with the appliance’s maintenance recommendations.
- Use or storage conditions which are detrimental to the good conservation of the appliance (oxidation, corrosion), use of energy, use or installation noncompliant with the manufacturer’s instructions, or negligence or use of peripherals, software or consumables which are unsuitable.
- Professional, collective, industrial or commercial use of the product, or use for purposes other than normal domestic purposes in the country where it was purchased.
- Damage caused by external sources, such as transport, weather conditions, electrical outages or power surges.
- Modified products, products with damaged, altered, erased or rusted guarantee seals or serial numbers.
- Damage caused by any intervention of non-authorised persons.
- Software updates as a consequence of changes to network settings
- Damage caused by elements external to the appliance (foreign bodies, insects, etc.)
- Appliance content – freezer, washing machine, etc. – (food, clothing, etc.)
- Product failure resulting from the use of third-party software to modify, change or adapt the product as supplied.
- Product failure resulting from use of the product without the accessories supplied with it or approved by Qilive.
The customer is responsible for regularly backing up the data contained on
their hard disk or in the internal memory of their device, and this before any
claim is submitted.
Qilive cannot be held liable for the loss or destruction of stored data, nor
may it be held liable for damage caused to software resulting from, in
particular, a restoration or breakdown.
In the same sense, Qilive is not required to check that SIM/SD cards have been
removed from returned products.
What are the modalities of the guarantee?
The modalities of the Qilive guarantee are as follows:
The guarantee enters into effect on the date of purchase (or date of delivery
if this is later).
You’ll need to provide proof of delivery/purchase before any intervention on
your guaranteed appliance. Please note that, without this proof, any work
carried out will be invoiced. Please keep your purchase receipt or delivery
note.
Any interventions will be carried out by Qilive or its authorised agents.
Any replaced par becomes the property of Qilive.
The guarantee offers advantages which are in addition to your legal rights as
a consumer and do not have any impact on the latter rights.
How to apply the Qilive guarantee
To request the repair or replacement of your product under the Qilive guarantee, for any country other than France, please return your product to the service desk of your place of purchase along with your proof of purchase (e.g. the receipt) and the accessories provided with the product, including those necessary for its correct functioning (power, adapter, etc.) with its original packaging. To apply the guarantee in France, please submit a request on our website: https://auth.sav-login.auchan.fr. The following information will be required: date of purchase, model and serial or IMEI number (this information generally features on the product, packaging or proof of purchase).
When does the guarantee become effective?
The Qilive guarantee is effective from the date of purchase or delivery of
your appliance, the latest date being valid.
Your product is guaranteed by Qilive 3 years for parts and labour.
Can Qilive guarantees be transferred?
Qilive guarantees can be transferred with the appliance, as long as the original proof of purchase from a recognised retailer, as well as proof of any change of ownership of the appliance, confirming the correct operational condition of the appliance at the time of change of ownership.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>