SUPERIOR 09139PG 15W Fast Wireless Charging Pad Instruction Manual
- June 6, 2024
- Superior
Table of Contents
SUPERIOR 09139PG 15W Fast Wireless Charging Pad
Specs
Wireless Charging Pad:
- Input: 5VDC/2A; 9VDC/1.67A; 12VDC/1.5A
- Output: Up to 15W (Fast Charge)
Qualcomm® 3.0 Wall Charger:
- Input: 100-240V~0.5A 50-60Hz
- Output: 5V/3A, 9V/2A, 12V/1.5A
- Charging time may vary based on device
CAUTION:
DO NOT place any credit cards or other types of magnetic material near the
charging pad. This product can ONLY be charged using the provided adapters and
cables. Do not attempt to disassemble the wireless charging pad as it may
short circuit or damage the product. Keep this product in a dry and ventilated
space. Do not place in direct heat or use in high humidity environments. Do
not use organic solvents to clean surface.
Using your Fast Wireless Charging Pad
- Connect the Micro-USB charge/sync cable to the Micro-USB port on your Fast Wireless Charging Pad.
- Plug the USB connector into the wall charger.
- Plug in the wall charger.
- Place your Qi-enabled device on the Fast Wireless Charging Pad with the screen facing up. The LED is white when your device is charging.
Charging Indicator Light Status:
RED LIGHT: Device is not charging properly. Please reposition your device
until you see the white light come on. WHITE LIGHT: Device is charging.
One Year Limited Warranty
This wireless product is covered by a limited warranty to the original
purchaser only in that this product is free from defects in workmanship and
materials for ONE YEAR from the date of purchase (damages through normal wear
and tear, alteration, misuse, neglect, accident, service by anyone other than
the authorized service center, or act of God not included). During the
warranty period and with proper proof of purchase, this wireless product will
be replaced. This limited warranty is in lieu of all other warranties, express
or implied, including, but not limited to, implied warranty of merchantability
or fitness for a particular use. For all warranty claims, the product must be
returned in accordance with PureGear’s return policy.
The ‘Qi’ symbol is a trademark of the Wireless Power Consortium. Qualcomm is a
trademark of Qualcomm Incorporated, registered in the United States and other
countries.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 inches between the radiator & your body.
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different form that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>