Pipishell PIBTC04 Toilet Seat Soft Close Instruction Manual
- June 15, 2024
- Pipishell
Table of Contents
Pipishell PIBTC04 Toilet Seat Soft Close Instruction Manual
Notes
- Please read the instructions carefully to get to know the product. Follow the instructions to install the toilet seat correctly.
- Please keep the instructions after reading. If you have any questions or concerns, please contact our technical support line at 1-800-556-9829 (US / CA) / 44-808-196-3885 (UK) or customer service at support@pipishell.net.
- Please do not open the toilet seat lid over 105° before you fix the seat on the ceramic toilet bowl.
Maintenance
- Wipe the toilet seat with a soft wet cloth.
- Clean the toilet seat using neutral cleaner, and dry it with a clean cloth
Cautions
To extend the lifespan of the soft-close toilet seat, do not force the seat
down to close it.
Maximum load 440 lbs / 200 kg. Do not exceed the maximum weight capacity.
Do not expose the toilet seat directly to sunlight for long periods. Avoid any direct strong light or high temperature
Tools Needed (Not Included)
Contents
- x 1
A x 2
B x 2
C x 2
D x 2
E x 2
F x 2
-
A Option A: Insert the expansion anchors [A] into the toilet, and thread the bolts [D] through hinges [C] and washers [B]. Do not fully tighten the bolts.
B Option B : Thread the bolts [D] through hinges [C], washers [B], and the toilet, then attach the nuts [E] to the other end of the bolts. Do not fully tighten the bolts.
-
Align the holes on the toilet seat to both hinges, and push the toilet seat into the hinges.
-
Adjust the toilet seat until it is centered.
-
Press the quick release button to remove the toilet seat from the hinges.
-
A Option A: Fully tighten the bolts [D].
B Option B : Tighten the bolts [D] further while holding the nuts [E]
underneath.
- Add the hinge caps and reattach the toilet seat
(US / CA) 1-800-556-9829
(UK) 44-808-196-3885
support@pipishell.net
supportjp@pipishell.net (JP)
WWW. www.pipishellav.com
AMZLAB GmbH
Laubenhof 23,45326 Essen
THEMIS AR support ltd.
85 Great Portland St, London, United Kingdom.
Manufacturer: BESTQI INNOVATION (HONG KONG) TECHNOLOGY CO., LIMITED
Address: FLAT/RM 185 G/F HANG WAI IND CENTRE 6 KIN TAI ST TUEN MUN NT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>