WINGS FLOBUDS 200 Truly Wireless Earbuds User Manual
- June 15, 2024
- WINGS
Table of Contents
FLOBUDS 200 Truly Wireless Earbuds
User Manual
FLOBUDS 200 Truly Wireless Earbuds
INTRODUCTION
Wings is India’s fastest growing audio, smart watches and accessories brand
catering to the youth. Wings was recognized as the most Prestigious Rising
Brand Of Asia 2021-2022 by BARC Asia in the gaming lifestyle accessories
category.
Wings is on a mission to create a pop culture led brand that the youth is
proud to own and Nod win, a subsidiary of Nazari Technologies, has a strategic
investment in alignment with the long term vision.
But before you dive right in, we strongly recommend going through this user
manual thoroughly as it contains important technical information to ensure you
have a seamless audio experience with us. After you’re done with reading the
manual, get ready to go to the next level with Wings !
WHAT’S IN THE BOX
| 2 N Pairs of Extra Ear Tips(S&L)
---|---
| 1N User Manual
| 1N Warranty Card
| 1N Type-C Charging Cable
PRODUCT LAYOUT
- Charging Case Led Indicator
- Earbud LED Indicator
- Touch Control
- Type C Charging Port
- Microphone
HOW TO PAIR
Please make sure that the device is fully powered before using the product.
Step 1: Make sure your case is charged up. Open the lid of the case and
take out the earbuds. The earbuds will turn ON and automatically enter the
pairing mode, and the Left earbud LED will flash quickly.
Step 2: Tap “Flobuds 200” from the smartphone’s Bluetooth menu. There is
a ring prompt after a successful connection. This indicates that the earbuds
are successfully connected to your device.
Step 3: Congratulations! You are now connected and can start playing
media.
Note: If you do not connect to any device within 180 seconds of entering
pairing mode, then both earbuds will automatically turn OFF. Please put the
earbuds back into the case and repeat the process to pair.
TAP CONTROL USAGE
BASIC FUNCTION| LEFT EARBUD| RIGHT EARBUD|
TOUCH CONTROLS
---|---|---|---
Volume Increase| | | Single Tap on the right
earbud’s touch sensor
Volume Decrease| | | Single Tap on the left earbud’s touch sensor
Play/Pause Music| | Double Tap on any earbud’s touch sensor
Next Track| | | Triple Tap on the right earbud’s touch sensor
Previous Track| | | Triple Tap on the left earbud’s touch sensor
Voice Assistant| | | Long Press for 2 seconds on the left earbud’s touch
sensor
Game Mode ON/OFF| | | Long Press for 2 seconds on the right earbud’s touch
sensor
CALL CONTROLS
| CALLING FUNCTION | LEFT / RIGHTEARBUD | TOUCH CONTROLS |
|---|---|---|
| Answer Incoming Call | Double Tap on any of the earbud’s touch sensor | |
| Hang up ongoing call | While on call, Double Tap on any earbud’s touch sensor | |
| Reject incoming call | Long Press for 2 seconds on any earbud’s touch sensor |
CHARGING THE CASE
Earbuds Low Battery: Earbuds will play a jingle when the buds are low on
power.
Earbuds Charging: When earbuds are placed inside the charging case, the LED
light on the earbuds will turn ON indicating that the earbuds are being
charged.
Earbuds Completely Charged: When the earbuds are completely charged, the LED
Light on the earbuds will go OFF.
RESET TING THE DEVICE
Please follow the below steps when you see two “Flours 200” in your Bluetooth
device menu on your mobile, or you can hear music through only one earbud.
This means the left and right earbuds have not auto-paired with each other:
Step 1: Disconnect the earbuds and remove “Flours 200” from your mobile list
of paired devices.
Step 2: Tap five times quickly to clear the pairing data on either of the
earbuds. The LED light on both earbuds will blink three times simultaneously
to show the process is completed.
Step 3: Put them back into the charging case, and “Roboids 200” is ready to
use. They will automatically switch on and pair instantly as well.
The Reset process is now complete and you will be able to hear music through
both earbuds.
TECHNICAL SPECIFICATIONS
| PARAMETERS | VALUES |
|---|---|
| Bluetooth Version: | V5.3 |
| Effective Distance: | 15rn |
| Impedance: | 320 |
| Product Weight: | 44g |
| Speaker Size: | 13mm |
| Total Ray Time: | Up to 50 Hours |
| Earbuds Ray Time: | Up o 10 Hours |
| Talk Time: | Up to 45 Hours |
| Standby Time: | Up to 300 Hours |
| Complete Charging Time. | 1.5 Hours |
| Earbuds Charging lime: | 1 Hour |
| Rated Input: | 5V/1A |
| Frequency. | 2OHz-2OKHz |
| Water and Sweat Resistant: | IPXS |
| Charging Port: | Type-C |
SAFETY & MAINTENANCE
Please read below suggestions in order to help prolong the product lifespan and clearly understand the warranty clauses:
- Please keep the product dry, do not put it in humid conditions to avoid a short circuit.
- Do not expose it to the peak sun or high heat for extended periods, as this will shorten the lifespan of electronic components, damage the battery and deform some plastic parts.
- Please do not put it in cold circumstances to avoid damage to the PCB board.
- Please do not attempt to dismantle the product, as it may be unsafe, especially for non-professionals.
- Do not use chemical products, detergents, or oily liquids to clean the item.
- Do not scratch the surface with sharp items to avoid damaging the case and appearance.
- Do not charge the product for more than 5 hours to avoid loss in battery life.
- Avoid hearing music at maximum volume for long periods as this can affect your hearing and is not advisable.
Note: Any damage to the product that is not a manufacturing defect will render the warranty null and void. Therefore, please take utmost care of your product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>