Seaoura SR-666 Programmable Aquarium Light User Manual

Seaoura SR-666 Programmable Aquarium Light User Manual

support@seaouraofficial.com

1. PRODUCT FEATURES

Product Features: Programmable design with LCD display: The LCD display allows you to run the light directly after setting the local time or modify it as needed. The 24/7 LED aquarium light has a programmable, gradual 24-hour light cycle setting for daylight and moonlight.
It can automatically turn on and off.
Super bright: Advanced 5054 and 2835 LEDs provide bright illumination for your plants and fishes, enhancing the beauty of your aquarium.
DIV brightness and color: 5 period ofDIY can be customized for different brightness in 4 time periods.
Light color, brightness, and the length of each period time can be set according to requirements.
Adjustable timer: The light on/off can be adjusted on the timer. It controls the light for both day and night and can be operated using 6 buttons.
Power failure memory function: With an internal CR1220 button battery, there is no need to re-edit the time and light settings after unplugging the device or experiencing a power outage.
Temperature alarm: Real-time water temperature monitoring function. It automatically alarms when the water temperature is too low or too high. Don’t worry about the impact of overheating or freezing on the fish. The alarm function can be turned on or off as needed. DC20V safe low-voltage adapter for safe use. The power adapter and controller are not waterproof.
IP68 waterproof rating: No need to worry about splashes or other accidental water drops.
The fully enclosed high-quality aluminum casing provides more efficient heat transfer and protects the device from moisture and water intrusion.
Expandable bracket: The expandable bracket allows the LED light to fit different sizes of aquariums within the expandable range. Suitable for freshwater plants and fish.

2.PRODUCT PARAMETERS

3. Button Functions

Timer Button: Used to settime and confirm settings.
24-hour cycle light mode button (24/7 button): Short press to switch between Sl/S2 mode, long press to select and edit Sl or S2 mode.
Color button: Used to turn on/off, select system color or DIY color. (Long press to turn off, short press to turn on, and then short press again to enter system color or DIV color selection).
Temperature Button: Short press to switch between brightness display and temperature display.
Long press to program the highest and lowest temperature alarm and switch between Fahrenheit and Celsius.
Minus Button: Used to decrease brightness, adjust time or adjust temperature.
Plus Button: Used to increase brightness, adjust time or adjust temperature.

4. Setup Introduction

5.”Sl” Timer Mode

6.”S2″ 24/7 cycle mode

7. Full spectrum light+ 7-color light+ cycling light+ DIV color

8.Temperature alarm

9.Controller Screen Backlight

To save your electricity and not disturb your sleeping, we have set the energy-saving mode for the controller screen backlight.

1. From 10:00 PM to 11:30 PM every day, the backlight will automatically reduce to 20% brightness. If you operate the controller during this period, the backlight will return to 100%.
   After 10 seconds of no operation, the controller will continue to automatically dim to 20%.
2. From 11:30 PM to 7:00 AM every day, the backlight will automatically turn off. If you operate the controller during this period, the backlight will return to 100%. After 10 seconds of no operation, the controller will continue to automatically turn off. The controller screen backlight will return to 100% brightness and remain on at 7:00 AM every day.

⚠ WARNING: Package with CR1220 Button batteries, Death or serious injury can occur in as little as 2 hours if swallowed, Keep away from children. Seek immediate help in swallowed. Call a local poison control center for treatment information. Keep in original packaging until ready to use. Dispose of used batteries promptly.
Risk of fire and burns. Do not recharge dissemble, heat above 100 c (212°F)or incinerate.

10.Note:

1. The battery is separately packaged and placed inside the package. After receiving the package, open the circular cover on the back of the controller, put the battery in and press it flat, then cover the lid.
   The Battery positive terminal up, negative terminal on the back. Otherwise, the battery will not be able to power on, and the power-off memory function cannot be used.

2. The controller and plug are not waterproof and should not be near water sources.

3. Please do not worry if the shell becomes hot. This light has a high power output, and the temperature of the shell may be high, which is a normal phenomenon.

4. The working time of Sl and S2 modes is 24-hour cycle, and no further timing is needed
   after setting up. The system has no timing function for both the system colors and the DIY mode colors.
   If you choose DIV mode colors or system colors mode, the light will remain on continuously.

5.  If the package you received is missing accessories, please check if the package is intact and take a photo of the label on the box. Contact the seller with your order number, or contact our after-sales email with your order number and the photo.

11. ATTENTION:

• Please read the manual carefully before using it and follow all instructions.
• Please keep the switch and controller away from water, the switch and controller are not waterproof.
• Please keep the light away from flammable items.
• Please unplug the power and contact the seller if the light is not working properly, Disassembly the lamp WILL NO WARRANTY
• Please unplug the power before maintenance.
• Please remember that the temperature range for the light is 23-113°F.

12.PACKAGE INCLUDES:

• 1x Led Light
• 2xMetal brackets
• 1xAC/DC power adaptor
• 1xuser manual

13. ⚠ WARNING:

Do not immerse the switch and the lamp in water to avoid possible electrical shock. If the switch falls into the water or becomes wet, do not touch it until you have unplugged it. Basic safety precautions should be observed, including the following:

1. Read and follow this user manual strictly.

2. DANGER- To avoid possible electric shock, special care should be taken. For each of the following situations, do not attempt to repair yourself; return the light to an authorized service facility for service or discard the light.
   A. Carefully examine the light after installation. It should not be plugged in if there is water on parts not intended to be wet.
   B. Do not operate the light if it has a damaged cord or plug, if it is malfunctioning or if it is dropped or damaged in any manner. The power cord of this light cannot be replaced, if the cord is damaged, the light should be discarded.
   C. To avoid the possibility of the light plug getting wet, position the aquarium stand and tank to one plug.
   A “drip loop,” shown in the figure below, should be arranged by the user for each V cord connecting the light to the receptacle. The “drip loop” is the part of the cord below the level of the receptacle or the connector. Suppose an extension cord is used to prevent water from traveling along the cord and coming in contact with the receptacle.
   If the plug or receptacle does get wet, DO NOT unplug the cord. Disconnect the fuse to the circuit breaker that supplies power to the light. Then unplug and examine for the presence of water in the receptacle.

3. Close supervision is necessary when the light is used near children .

4. To avoid injury, do not touch or move hot parts.

5. Make sure the light is securely installed before operating it.

6. Read and observe all the important notices on the light.

7. If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for fewer amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so it will not be tripped over or pulled.

8. The light is intended FOR HOUSEHOLD USE ONLY.

9. SAVE THIS USER MANUAL.

14. WARRANTY:

1. 1-yearfree warranty.
2. 1-month free return.
3.  Free replacement for three months.

15. DISPOSAL

Do not dispose of this product as unsorted municipal waste. This product must :a not be disposed of together with domestic waste. It must be disposed of at an authorized place for recycling electrical and electronic appliances. By collecting and recycling waste, you help save natural resources and ensure the product is disposed of in an environmentally friendly way. Thank you for choosing SEAOURA.
If you have any problems or suggestions for the SEAOURA LCD Monitor planted aquarium led light, please contact us by email before leaving feedback or opening a case. It will be the fastest way to solve your problem. Thanks again!

support@seaouraofficial.com
www.seaouraofficial.com
vat06@seamew.de
info@seamew.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>