YITAHOME PL-822 Commercial Electric Griddle User Manual

YITAHOME PL-822 Commercial Electric Griddle

Product Information

Specifications:

• Model: PL-818B (14)
• Name: Stainless Electric Griddle
• Voltage & Frequency: 110V 60HZ
• Power: 1500W
• Size of Vat Dimension: [Not specified]
• Note: Single temperature controller

Product Usage Instructions

Installation:

1. The using voltage of the machine must be coordinated with the supplied voltage.
2. Users should install a suitable power switch or air switch.
3. There is a grounding screw behind this oven. The grounding bolt should be connected with more than 2.5 square mm of copper wire according to safety rules for safety’s sake.
4. Before using this product, please check all parts power supply, and ground connection.
5. The shell of this machine must be grounded well for safety’s sake!

Product Troubleshooting

Trouble:
Shut on power switch K1, the indicator is not on

Cause:

• The fuse of the power switch is burned.
• The connection of the power cord is not well.

Resolution:

• Replace a suitable fuse.
• Firm power cord.

Trouble:
The yellow indicator is not off. The ascend of temperature cannot be controlled.

Cause:

• The connection of the indicator is wrong.
• The temperature controller is out of action.

Resolution:

• Correct it with the right connection.
• Replace the temperature controller.

Trouble: The indicator is not on, but temperature control is normal

Cause:

• The contact of the indicator is not well.
• The indicator is burned.

Resolution:

• Firm connection.
• Replace indicator.

FAQ:

• Q: What is the voltage and frequency of the PL-818B (14) model?
  A: The voltage is 110V and the frequency is 60HZ.

• Q: How much power does the PL-818B (14) model consume?
  A: The PL-818B (14) model consumes 1500W of power.

• Q: Does the PL-818B (14) model have a single temperature controller?
  A: Yes, the PL-818B (14) model has a single temperature controller.

STAINLESS ELECTRIC GRIDDLE USER’S MANUAL
The Stainless Electric Griddle is designed with the advantages of overseas products. They have features of the new style, reasonable structure, easy to operate, good warmer result and saving energy. They form a complete production system with YXD Series Electric Baking Oven, BS Series Pillar Warmer Display Cabinet, EF Series Electric Fryer, and HT Series Electric Cooking Oven, with features of easy operation, reasonable distribution and occupy less space, They are equipment for Chinese and Western food restaurant, Karaoke room and fast-food restaurant.

Basic parameter

Scoinngtlreoltleemr perature

Scoinngtlreoltleemr perature

Dtuoruecbolenttermolpleerra-

Dtuoruecbolenttermolpleerra-

PZ-819

(22″+Fryer)

| Griddle+Fryer| 110V 60HZ| 310700W| 548×350| 880×478×323| Dtuoruecbolenttermolpleerra-

Instruction

1. Double temperature controllers are beside two sides of the machine and they can be used alone. The left one can control the temperature of the left vat; the right one can control the temperature of the right one.
2. Shut on the power switch K1, and the green indicator is on, at that time electricity reaches the machine, Rotate the temperature controller clockwise to the red point, at that time the yellow indicator is on and the green indicator is off. The green indicator is on and the electric heating tube works again and the temperature goes up again, It repeats again and again to make sure the temperature is constant in the setting range.
3. According to different food and adjust the needed temperature to get the deal result of making food.

Basic parameter

power switch is burned.
2. The connection of the power cord is not well| 1. Replace a suitable fuse.
2. Firm power cord.
1. The yellow indicator is not off.
2. The ascend of temperature can not be controlled.| 1. The connection of the indicator is wrong
2. The temperature controller is out of action| 1. Correct it with the right connection
2. Replace temperature controller
1. The indicator is not on, but temperature control is normal| 1. The contact of the indicator is not well
2. The indicator is burned| 1. Firm connection
2. Replace indicator

Attention for installation

1. The using voltage of the machine must be coordinated with the supplied voltage.
2. Users should install a suitable power switch or air switch.
3. There is a grounding screw behind this oven. The grounding blot should be connected with more than 2.5 square mm of copper wire according to safety rules for safety sake.
4. Before using this product, please check all parts power supply, and ground connection.
5. The shell of this machine must be grounded well for safety’s sake!

Circuit diagram

• S—TEMPERATURE CONTROLLER
• EH—HEATING TUBE
• HL2—HEATING INDICATOR（YE）
• E—GROUND PROTECTION
• S1—TEMPERATURE LIMITER
• HL1—POWER INDICATOR（GN）
• SW—MICROSWITCH

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>