ingenico UYS01000592 Magic Box User Guide

June 15, 2024
ingenico

ingenico UYS01000592 Magic Box

ingenico UYS01000592 Magic Box

Product Introduction

Open Package Inspection

Open the package to check if there are any disabling masks or transportation damage in the terminals and fittings.

Procedures:

  1. Open the package
  2. Check the following items
    • MAGIC BOX
    • Product instruction
    • One adhesive sticker
  3. Save the transportation package and packing material for second use.
Device Introduction

Device Introduction

1.  Power indicate led 2. RJ45Network.lnterface
3. USB-TYPE A 4. USB-TYPE A(optional)
5.USB-TYPEB 6. USB-TYPE C Power Interface
Interface definition
  1. RJ45interface
    Sequence| RJ45 Signal
    ---|---
    1| ETH_TX+
    2| ETH_TX-
    3| ETH_TX+
    4| NC
    5| NC
    6| ETH_TX-
    7| NC
    8| NC
  2. USB-TYPE A interface
    Sequence| USB-TYPE A Signal
    ---|---
    1| VBUS 5.0V
    2| D-
    3| D+
    4| GND
  3. USS-TYPE B interface
Sequence USB-TYPE A Signal
1 Not connect
2 D-
3 D+
4 GND
  1. USB-TYPE C interface

Product Technology Features

Product Technology Specifications

Port| a USB TYPE-C power input port
a RJ45networkport
a USB TYPE-A HOST port supporting USB2.0
a USB TYPE-8 DEVICE port supporting USB2.0
a USB TYPE-C port supporting USB2.0
---|---
Power| Power input: 5.0V DC 2.0A/3.0A
USB TYPE-A HOST output: 5.0V DC O.SA
USB TYPE-C output: SV/1.8A{Power input with 5.0V/3.0A);
5V/1.8A(Power input with 5.0V/2.0A,not use USB TYPE-A);
5V/1.3A(Power Input with 5.0V/2.0A, use one USB TYPE-A);
SV/0.8A(Power input with 5.0V/2.0A, use two USB TYPE-A);
Size and Weight| Size: 74mmx41mmx26mm
Net Weight: 100g
Gross Weight: 124g

Environmental Conditions

Environmental conditions for running, storing and delivering the product:

Temperature Running 0°C ~ 40°C/ 32°F ~ 104°F
Storage and Delivery – 20°C ~ 70° C/ – 4°F ~ 158°F
Humidity Running 10% ~ 90%
Storage and Delivery 5% ~ 90%   ( 40°C) I (10 4°F)
Atmospheric pressure 86kPa ~ 106 k Pa; Below 2000 meters above sea level
Product Functions

The MAGIC BOX has two main functions as below:

  • DX4000 charging, Connect the MAGIC BOX with the power adapter, then connect
    DX4000 with the MAGIC BOX to get charged.

  • Serves as extended communication ports of DX4000: Network port, USB port.
    Product Functions

Installation

Connect MAGIC BOX with DX4000

Connect MAGIC BOX with DX4000

Note: Please put the cable to the correct position in the battery compartment, as the third picture shown

Fixing of MAGIC BOX (optional)

Fixing of MAGIC BOX\(optional\)

Notes

  • Prevent the terminal from sun exposure, high temperature, moister and other mean conditions.
  • Cut off the power before cleaning the device and wipe the main body with dry cloth.
  • When the following abnormal phenomena occur, stop running the device immediately, cut off the power supply, and report to the service provider as soon as possible:
    1. harsh noise heard during operation.
    2. impurities or water found in the machine.
    3. Unpleasant smell found during operation.
Delivery and Storage
  • Avoid rain and snow, sun exposure and mechanical impact.
  • The product should be stored in the original box. The box should be at least 15cm away from the floor, at least 50cm from the wall, heat source, cold source, window or air inlet.

Standard

CE Marking

The CE marking Indicates MAGIC BOX complies with the requirements of European
Directive 2014/53/EU on Radio Equipment for:

  • The protection of the health and the safety of the user and any other person.
  • The protection requirements with respect to electromagnetic compatibility.
  • And complies with harmonized standards.

Environment (WEEE, Batteries and packaging)
This product is labeled in accordance with European Directives 2012/19/EU concerning
Waste Electrical and Electronic Equipment (WEEE) and 2013/56/EC concerning Batteries and Accumulators. Those provisions are requiring producers and manufacturers to become liable for take-back, treatment and recycling upon end of life of equipment and batteries.

THE PRODUCT

The crossed-out waste bin stuck on the product or its accessories means that the product belongs to the family of electrical and electronic equipment, and waste batteries must not be thrown away but collected separately and recycles.
Please contact your retailers for more detailed information about the compliance solution In place for disposing of your old product and used batteries.

Packaging waste must also be collected separately to assure a proper disposal and recycling.

In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health.

“INGENICO is a trademark of BANKS AND ACQUIRERS INTERNATIONAL HOLDING . This Document is Copyright © 2023 BANKS AND ACQUIRERS INTERNATIONAL HOLDING .
BANKS AND ACQUIRERS INTERNATIONAL HOLDING retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of BANKS AND ACQUIRERS INTERNATIONAL HOLDING. Moreover, nobody is authorized to place this document at the disposal of any third party without the prior written permission of BANKS AND ACQUIRERS INTERNATIONAL HOLDING. If such permission is granted, it will be subject to the condition that the recipient ensures that any other recipient of this document, or information contained therein, is held responsible to BANKS AND ACQUIRERS INTERNATIONAL HOLDING for the confidentiality of that information. Care has been taken to ensure that the content of this document is as accurate as possible. BANKS AND ACQUIRERS INTERNATIONAL HOLDING however declines any responsibility for inaccurate, incomplete or outdated information. The contents of this document may change from time to time without prior notice, and do not create, specify, modify or replace any new or prior contractual obligations agreed upon in writing between BANKS AND ACQUIRERS INTERNATIONAL HOLDING and the user. BANKS AND ACQUIRERS INTERNATIONAL HOLDING is not responsible for any use of this device, which would be non-consistent with the present document. All trademarks used in this document remain the property of their rightful owners”

13-17rl.leP”‘J”s,92150SLn,snas-Fraoce
Bank and Acquirers International Holding, SAS/814767216RCSNanterre.

Copyright© 2023 lngenico –
Banks and Acquirers International Holding SAS
All rights reserved

www.ingenico.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals