Simple Deluxe 32 Inch Electric Oscillating Tower Fan Instruction Manual

Table of Contents

Simple-Deluxe-32-Inch-Electric-Oscillating-Tower-Fan-
PRO

CAUTION
Read and follow all instructions before operating the fan. Do not use a fan if any part is damaged or missing.

WARNING

To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
This appliance has a polarized plug which is intended to fit in an outlet only one way. If this does not fit the outlet. contact a qualified electrician. Do not attempt to bypass this procedure.
This product is to be used indoors.
Unplug from the electrical supply source before cleaning.
If the power cord is contact your service or a qualified electrician to install an appropriate r$acernent coed to prevent any injury damage.
This appliance is not intended for use by persons(including children) with reduced physical. sensory or mental capabilities. or lack of experience and knowledge. unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

RULES FOR SAFE OPERATION

Never insert fingers. pencils, or any other object through the guard when the fan is running.
Disconnect the fan when moving from one location to another.
Disconnect the fan when removing the grills for cleaning.
Be sure the fan is on a stable surface when operating to avoid overturning.
Do not use a fan in the window. Rain may create electrical hazards.
The fan is for home use only.
Do not leave the fan running.

Before commencing assembly familiarize your self with all the assembly components(See chart and diagram).

Before mounting the appliance, make sure it is unplugged;
AssembIe the front base(3) and rear base(2) into one;
Install the base to the corresponding position of the fan body (1), and the hole corresponds to the pillar;
Put the power cord(4) through the center of the nut(5) and tighten the nut(5);
CIip the power cord into the middle slot of the rear base;

ASSEMBLY COMPONENTS

The sensor of the remote control must be pointed at the fan receiver to operate the property;
The distance between the remote control and the fan should be within 20 feet and 45 degrees radius left to right of fan;(see Fig.2)
See the button functions as they appear on the remote control ;(Fig 3)

Simple-Deluxe-32-Inch-Electric-Oscillating-Tower-Fan-3

USER SERVICING INSTRUCTIONS

Grasp the Plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades, (see Fig. 5)
Remove the fuse carefully. Remove the fuse by prying it out carefully. (see fig.6)
Risk of fire, Replace fuse only with 5Amp max. 125 Volt fuse.
Close the fuse cover, Slide close the fuse access cover on top of the attachment plug. (see fig.7).
Risk of fire. Do not replace the attachment plug. Contains a safety device (fuse) that should not be removed. Discard the product if the attachment plug is damaged.

Tips: Do not overexert when replacing the fuse or damage may occur when hard to close the access cover, make sure the fuse is fully inserted.

Be sure to unplug from the electrical supply source before cleaning,
Plastic parts should be cleaned with mild soap and damp cloth or sponge, Thoroughly remove soap film with clean water.
Be sure to gel water or other liquid into the rotor.