Simple Deluxe 50W Metal Stand Fan Instruction Manual
- June 14, 2024
- SIMPLE DELUXE
Table of Contents
INSTRUCTION MANUAL
HIFANXSTAND16METALF
Metal Stand Fan
- CAPACITANCE
- MOTOR
- FUSE
- SWITCH
- CONNECTOR
SAFETY PRECAUTIONS
- This appliance is not intended for use by persons (including children) with reduced physical7sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Have any repairs carried out solely by a qualified electrician. Never try to repair the appliance yourself
Sleek & modern high-velocity fan provides more powerful wind than ordinary plastic fans. Draws air off the floor and circulate through the entire room keeping room cool and breezy. Put near the windows and it helps exhaust hot indoor stuffy air and pulls in fresh outdoor air.
- Energy-saving, high velocity motor for maximum air circulation
- Tilt-adjustment for flexible use
- Triple speed selection
- Precision fan blades for powerful wind but low-noise
- Chrome-stand, solid construction with thermal-protection to prevent motor overheat.
A. Grill Decoration
B. Front Guard
C. Clip
D. Fan Blade
E. Blade Screw M4X8
F. Rear Guard Screw M5X8
G. Rear Guard
H. Carrying Handle
I. Motor Shaft
J. Speed Control Knob
K. Oscillation Knob
L. Motor Housing
M. Fan Head Neck
N. Pole
O. Adjustable Height Knob
P. Fan Base
Q. Weight
R. Washer
S. Locking Lever
T. Adjustable Tilt Knob
U. Range of Motion Screw
V. Range of Motion Hole
W. Securing Knob
X. Carriage Bolt
(Blade screw match the Concave of motor shaft)
Operating Instructions:
a) Ensure voltage used corresponds with the voltage indicated.
b) Turn the speed control to selected speeds: 0(off) and speeds I, II, III is
Slow, Middle, Fast.
c) Tilting angles-By pushing the tilt-guard, you can adjust the fan to any
elevation preferred.
d) Never touch the blades with hand or any object!
e) Do not pulp the cord too hard. If damaged after pro-long use, get it
repaired by any electrical repairman.
f) To clean: Disconnect the power cord from the mains. Remove the guard and
the blades carefully. Do not drop the blades! First use soft cloth with light
soap to clean off oil stains. Then wipe and polish with dry cloth. Never use
polish or any corrosive liquid that will damage the paint, metal or plastic!
Put back the blades and lock the guard securely before use.
NO exchange will be entertained if the above instructions are not followed. Always Test the product first before purchase.
TECHNICAL INFORMATION
Operating Voltage: 120V~ 60Hz
Power Consumption: 50W