Simple Deluxe 18 Inch Industrial Wall Mount Fan Instruction Manual

June 15, 2024
SIMPLE DELUXE

(18″/20″/24″)WALL
MOUNTED FAN
OPERATION INSTRUCTIONS

Intended Use:

This product is intended for indoor residential, office, industilal and other commercial applications. Use only with electrical wiring that is in goad working arder and that meets applicable codes and ordinances. If you have any questions whether your wiring is adequate, consult a qualified electrician.
While using your fan, you should follow the IMPORTANT INSTRUCTIONS listed betow. As part af those instructions, we have used the word “WARNING “to indicate the level of hazard: WARNING Indicates a hazard which, If not avoided, could result in Injury or death.

IMPORTANT INSTRUCTIONS

As with all alectrical appliances, bacic safety precautions should always be followed to reduce the risk of electric shock, fire, or injury 16 persons, including the following precautions:

  • Read all the instructions bcfore using this fan.

  • Use this fan only as described in this manual. Any other ute not recommended by the manufactures may cause electrical shock, fire or injury to persons.

  • Do not operate the fan with a damaged power cord or afler the fan malfunctions or has been dropped in any manner.

  • Use of extreme caution is necessary when any fan is used by or near children, disabled persons or pets and whenever ihe fan is left operating unattended.

  • Do not place tha fan on a small, unlevel, uneven or any surface which might allow fan to tip or fall.

  • For proper operation, tan should be placed on a smooth, non-combuatible, level surface.

  • Always unplug fan when not in use, when moving from place to place, when assembling or disagsembling parts, and before cleaning.
    The use of attachments, not recommended or sold by the manufacturer, may cause hazards.

  • Do not use outdoors.

  • Do not use fan in window. Rain may ceuse electrical hazard (for non-windew models).

  • Do not operate the fan with btade quareds or any safety device removed.

  • Avoid the use of extension cords due to risk of fire. If an extension cord must be used, the cord must be minimum 14 AWG and rated not less then 1875 watts.

  • Do not run power cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from trafic area where it will net be tripped over.

  • Do not insert of allow any object to enter any openings on the fan. Doing so may cause electric shock and /or fire hazard.
    Avoid contact with moving parts.

  • This appliance is not intended for uee by persons (incksding chadren) with reduoed physical, sensory or menta) capabilities of lack of experience and knowledge, unless they have been given supervision or inetruction concerning usr of the appliance by a person responsible for their safety.

  • Children should be supervised fo ensure they do not play with the appliance.

READ & SAVE THESE INSTRUCTIONS

WARNING: Shock Hazard
Use your fan only in dry environments. This fan ts not intended for use in a batiwoom, laundry area, or similar locations, or near sinks, washing machines, swimmingpoois or other sources of water. Never locate fan where it may fall imo a bathtub or other water
receptacis. Do not use in damp environments such as flooded basements.
WARNING: Hot Surfaces
Do not touch fan motor when In use. This motor is hot when in use, to avoid burns, do not fat bare sidn touch hot surfaces.
WARNING: Fire Hazard
Fans have ercing or sparking perts inside. Do not use near combusible matertals or fammabie gases or sources of heat.
DO NOT USE In areas where gasoline, paint or flammable materials are used or stored. To prevent a possible fire, do not block aw intakes or exhaust in any manner, Bo not insert or alow foreign objects lo ender any ventilation or exhaust opening as this may cause an electric shock, fire, or damaga the fan.
WARNING: Electrical Shock Hazard
Do not use with a damaged cord or plug, Use with an adequate electrical system that is up to code.
CAUTION: to prevent Electric Shock, this product has a three prong grounded plug that must be inserted into a matching properly grounded outlet to reduce the risk of electrical shock. Do not attempt to defeat this safety feature.
WARNING: to Reduce the Risk of Fire or Electric Shock, do not use this product with any solid-state speed control device.
DO NOT operate any fan with a damaged cord or plug or after fan malfunctions, has been dropped or damaged in any manner. Do not operate fan with a broken blade, safety cage or any visual imperfections. Disconnect power before servicing. For repairs covered under warranty, see warranty statement. For all other repairs contact Comfort Zone Customer Service by telephone or mail for information and assistance.
DO NOT run pover cord under carpeting. DO NOT cover cord with throw rugs, runners or the like. Anange cord away from traffic area where it will not be tripped over. Avoid the use of exien&on cords due to risk of fire. If an extension oord must be used, the cord must be minimum 14 AWG and rated not less then 1875 watts. Do not use an extension cord unless the plug can be completely Inserted into its receptacle. Unplug the fan when not in use. Do not operate fan with its ventilation obstructed.

WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC, SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING.
a) Inetaftation work and electrical wiring must be done by qualified person(s) in accocdance with all applicable codes and standards, including fire-reted construction.
b) When cutling or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Installation instructions

Use the folowing information as a guideline only. It is the user’s respansiblity to be sure the location and the wall surface can handle the weight of this fan (14.6 Ibs).
The wall fan must be mounted on 12 inch (300 mm) thick dry and cament – grouted firm wall or on 4 by 5 inch wood studs / joiats.
Use wall bracket as a template for locating the holes to be drilled.
After cotermining the hole locations, use an appropriate sized drill bit and, drill holes through mounting surface.
It is recammended that a minimum of grade 5 fasteners be used. The following are acceptable surfaces for mounting wall mount assembly.
STEEL SURFACE – When mounting to a steel surface, such as vertical -beam, drill through holes at pre-marked locations, using a 9/32″ drill bit. Attach wall mount assembly to mounting surtace using 1/4″ -20 hex screw, in combination with 1/4″ flat washers, 1/4″ lock washers, and 1/4″-20 hex nuts.
MASONRY SURFACE – When mounting to a masonry surface use a 1/4″ expansion type boll or 1/4″ masonry fag with shield designed to handle the weight of this fan. Drill holes at pre-marked locations using appropriate sized drill bit as recommended for the fastener.

Usage:
Fan operation:
Always operate the fan in the upright position following af instructions and racommendations listed in this manual.
Fan location: Place the fan in the area of the room that will provide proper fan cooling.

Fan connection:
wall outlet. Be sure ptug fits tightly in outlet. A loose connaction may cause overheating and damage to the plug or fan.
Note: To prevent overloading a circuit, do not plug the fan into a circuit that is servicing other electrical needs.
Speed control: To pperate the fan, each pull of the siring will cycle through the following settings:

  • OFF
  • LOW
  • MED
  • HIGH
  • OFF

Specifications

Care and Maintenance
Cleaning:
CAUTION-Before cleaning the fan be sure to disconnect power cord from the plug. Clean the grille surface with a clean damp clath. Do not use harsh chemical or abrasive cleaners. DO NOT IMMERSE THE FAN OR ANY WIRES IN WATER. Replace front grille before fan use. Allow fan to dry completely before use. Periodic grille cleaning with a vacuum will prevent dust build up. The motor is sealed and does no require any interior maintenance cleaning or lubrication.
Maintenance: The internal motor bearings are permanently tubricated at the factory and do not require any additional lubrication.
Repair: DO NOT OPERATE THE FAN WITHOUT THE GRILLE IN PLACE. DO NOT USE THE FAN IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY.
Storage: Keep original carton for storage of the fan. Coil and tie the power cord to avoid damage during storage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SIMPLE DELUXE User Manuals

Related Manuals